WEARSON LCD Monitor VESA Desk Stand Metal Foldable for 10-22 inch All in One PC Monitors Holder

After having my plastic monitor stand fail holding my all-in-one PC up, and not really finding a a true PC stand out there that didn't have a weak center pivot, I found this one. My Dell AIO (all-in-one) is bigger than this stand accommodates, so I added a 2" extension plate and now I've got a strong support for my AIO. I also wanted the COG closer to the middle, so I drilled out the holes to re-locate the main support brackets. I'm a mechanic, and could make a better one but given the time to make one, modifying this one was easier. Fabbing something like this would take hours. This is a strong stand, and I after modifying it I am very happy with it. This one isn't much better at holding the center pivot (front to back) than others, but as I take my AIO out on the patio at night this one stands up better than the plastic "monitor" stands. Seems no one makes a purpose-built AIO stand built heavy like this one. If you're handy you can modify this one in several ways to fit your needs as I did. The center pivot (front to back) is the Achilles heel for all these stands, drooping over time (not holding it's place) is a problem. Using good lock-nuts and snugging them up helps, but it seems a better design is in order. Serrated faced mating surfaces would solve this, but again, no one makes out there makes anything along that vein.

I'm not sure about it's sturdiness with mounting a big monitor on it, but I use a bunch of these attached to an iPad w/ VESA mount case for mobile POS terminals. They work perfectly, are strong enough to stand up to daily use, easily adjust the tension of the movement, and I love that it can collapse down flat. Its the only one I could find that does that while still being sturdy enough for what we need. Very happy with this product for my particular application.

Feels more like a replacement for a missing desk stand than as a stand for a portable monitor. Quite heavy.

And this stand accommodates lowering your computer monitor nicely. We view computer monitors at fairly close range—yet the monitor, on a typical stand, is well above the centerline of a bifocal eyeglass lens, making it difficult to focus on. But if you put the monitor mostly in the bottom half of your bifocal lenses, using a monitor stand such as this, you can focus on most, if not all of the screen, with little effort indeed.

Wasn’t sure from anything I read on here if this would work for me. I have a 24” monitor and the description says up to 22”. It works GREAT! I’m a DJ and wanted a lower profile monitor stand so it wasn’t sitting so high and blocking my view as much. This stand allows with 24” to basically sit right on top of my table!! I’m very happy with this purchase:)

This worked perfectly to position my monitor in an angled position.

it's OK but the screw slots are not quite wide enough for a proper vesa mount. it's a defect of only .5 of a mm but it's enough to make life difficult. Make sure you tighten up all the bolts before you add the monitor, they are very loose. The BIG NASTY is the feet, they are crap rubber and mark the surface they are on. this is the second product from this company I have tried and they do not understand what "vesa compliant" actually means. you can make this work with a bit of effort.

I had to tighten all the bolts, but otherwise it's pretty decent.

モニターの高さを低くするのに、大変便利です。

i put a 17" all in one, its border line touching the base & desk. the base even if you really tighten it really had, it's not strong enough to hold anything a bit heavier than a supper light plastic monitor, mine is heavier and it cannot hold it at all... total waste of money and missleading specs

ライブなどのステージにモニターを置く用途で使用しています。 【総合】 ある程度の重量、硬さがあり、取り回しがしやすく、収納に困らない。 ほぼ満点に近いロースタンドだと思います。 【悪い？部分】 ちょっと足のゴムがやわいかな〜って思います。 もっと硬質なゴム足の方がスレやズレがなくなって良いのかな、と。 また、増し締めが必要な箇所がある場合、六角＋スパナが必要になるのですが、スパナがついてこないところでしょうか。 まぁ、これを購入される方はスパナ程度持っていそうですからマイナスレビューにはならないかな。 【改善してほしい部分】 複数個を同時に使用するため、同じ角度が出せるように角度メモリを足の部分に入れてほしかったなぁと思います。 もしくは5段階くらいでカチッと決まるような機構があると嬉しいですね。 （そういう商品もあるけど探すのも一苦労だし、あと高い）

よくわからない六角のネジと、それを回す為と思わせておいてサイズが合わなくて使えない六角スパナが付いてきました。 とりあえず手持ちの別なネジでモニタは固定できましたが、 本来何に使う物だったのか謎です。 スタンド自体は普通に使えました。

本体自体は結構重いくせに、2kg程度のモニターでも首が落ちてしまいます。ボルトを締めてもあまり効果がありません。構造的欠陥です。