LEMATEC Dual-Action Pneumatic Vacuum & Air Blow Gun with 6 Attachments - 150 PSI Multi-Functional Air Compressor Tool for Automotive & Workshop Cleaning - Vacuum-blower

Works great for the price.

What I bought this for is not what most would think of - I got it to blow out the dirt and trash in the "lines" in the driveway and sidewalks so that I could replace the cord that was supposed to be there. Some were huge and I had to either buy really big or use the large space expandable foam. The foam was more expensive but I used it. Some spaces were really deep (curb). I don't know how long it will last either. This purchase was late in the game (but I still have a lot of sidewalk to do). It sure saves my back. The air compressor sure works wonders on getting the crack or line clean. I don't have to bend over and is quite nice unit.

Here's a tool I never thought I needed. But it comes in handy a lot at work when I'm removing mouse nests from the top of engines and air cleaner boxes. I certainly use it more often than I thought I would. Not a bad price either..

This review is for the Le Lematec 2-4 foot adjustable blow gun. In general I like this blow gun. It has plenty of reach and isn't too heavy. Unfortunately the one I received has substantial air leakage at the inlet fitting where it is attached to the plastic handle. Since I didn't find other reviews with that issue I am assuming it isn't a widespread problem and I have ordered a replacement. If the replacement has issues I'll add to this review. This blow gun comes with a male 1/4 NPT fitting pre-installed which will require an appropriate quick disconnect fitting for most people. As near as I can tell the fitting that is pre-installed is not removable and even if it was it is hard to say what the thread would be to mate with the plastic handle. Probably not NPT. If you are going to use a quick disconnect with this you will need a 1/4 female NPT by whatever style of quick disconnect fits your equipment. It is unfortunate that the hex on their installed fitting is so short it is hard to get ahold of securely and the nipple is as well such that it is nearly impossible to use a backup wrench while tightening your quick disconnect fitting. The body of the QD fitting will hit your backup wrench before the QD fitting is very tight. A thicker hex and a longer 1/4NPT nipple section would solve this issue. They need to get it so that the QD fitting body doesn't hit the backup wrench before the QD is tight. If you happen to have a thin 14mm wrench that might help. Unfortunately I don't. Update 7-6-23: Today I received my replacement. I also invested in a thin open end wrench set (metric and SAE). The replacement leaks at the inlet fitting at the 1/4 NPT threads. Bad enough you could hear and feel the leakage. Regardless of how tight you have the QD connector. I tried two different brands of QD connectors with the same results. This inlet fitting is just plain a poor quality. Also, there is no size of an open end thin wrench that fits the fitting hex tightly. SAE or metric. This ends up rounding off the hex while attempting to tighten the QD connector. I also used thread lubricant and that didn't help. There is probably a good reason most air guns come with a QD already installed. Usually the "industrial" type. which is the most common. For those who are set up with a different style, well, that's where "universal" chucks come in. Some users may not object to air leakage at the fitting but I do. I leave my accessories connected when I'm not using them and leaking causes my compressor tank to bleed down and the compressor will cycle to refill the tank. NPT threads if made properly don't leak. These do. So, off this goes as a return for credit. Two in a row makes it unlikely a third one would be any different. This air gun would have been nice to have if it didn't leak. If it gets changed to a design that comes with a QD installed with no leaks I'll consider trying it again.

I bought the small air hose vacume and I love this product... it works amazingly well... it did not come with the airhose fitting fyi. So you will need to get 1 of those inorder for it to work.

love this product I bought cause of the reach you can get in the back of a tractor or a lawn more and clean out the radiators and get into the smallest places. Don't get my hand all cut up try to clean stuff up and also has an extension at the end to get into tighter places. would buy this item again. best one ever

First use exposes a flaw. Purchased this to do quick pickups without getting out the shop vac. Vacuum suction is adequate for what I bought it for and it did pick up debris out of the corners. Unfortunately the dust bag is too course to contain fine particles. This car hasn’t been vacuumed in a minute so has a lot of “dust” in the carpets. For this application this tool is not good. Very disappointed.

It works, however, if youre trying to clean up a spot and leave it spotless then you might want to find something else. Im a welder and need some parts super clean, the vacuum sucks up the debris but it also spits it back up all over the area through the zipper area and area where the bag attaches.

Nice product but even better if you provide the nitto 1/4 inch plug

工場の清掃をするのに使用しています。 噴射と吸入のパワーが結構あって、結構大きめのガラでも簡単に清掃できるのが特徴。 しかも結構静かなので周囲を気にする必要がありません。つまりなども起きにくいですね。 場所によって先端のアタッチメントを変えて、より精度の高い清掃ができのも嬉しいところ。

My work has a powerful air compressor for filling our 5 ton box trucks and semi trucks tires. I hooked this up so I could clean the inside of my truck because it’s always full of dust dirt and sand from handling scrape tires all day. So far I’m impressed by this. I can say these honestly do feel on the cheaper side. But they get the job done and I’m happy with it. Took me A moment to figure it out so that I can use it properly

molto funzionale

全く使い物にならない。倍払って充電タイプの掃除機を購入した