VEVOR Stainless Steel Prep Table, 24 x 15 x 35 Inch, 440lbs Load Capacity Heavy Duty Metal Worktable with Backsplash Adjustable Undershelf & 4 Casters, Commercial Workstation for Kitchen Restaurant

very nice table

This table exceeded my expectations and fits perfectly in a small space. I use it in my garage mainly for frying, and it handles the job really well. It has enough surface area for my air fryer and still leaves room for other paraphernalia without feeling crowded. The stainless steel is easy to clean, feels sturdy, and the extra shelf underneath is very practical. Overall, it’s a solid, functional worktable that makes a tight space much more usable.

For the price, I wasn't expecting this table to be anything extraordinary, and it's not. 9/10 for price, 7/10 for overall quality. We'll start with the good and work towards the bad: The casters appear to be of decent quality, they look sturdy and I dont think they're going to scratch up my floor or anything. 10/10 for the wheels. I'm not using this for anything heavy duty, I just have a small 3D printer that I'll be putting on the top shelf and the bottom shelf is the perfect size for my gaming PC. Honestly, the #1 reason I bought this thing was because the dimensions were EXACTLY what I was looking for and it's gunna fit the very small space that I have available next to my desk. I like that it's a taller table because that'll make it harder for my toddler to come in and mess with stuff. This was a lot cheaper than some other options I was looking at, and the quality is honestly better than I expected for it being so cheap. Assembly was a breeze, I think my 3 year old daughter could handle putting this together (if the pieces weren't so sharp). 10/10 for ease of assembly. The assembled product looks pretty decent too. 8/10 for appearance. Two of the eight leg pieces came bent where they join together, but not so badly that I couldn't bend them back with a pair of pliers and relative ease. So, in this case it was a good thing that the metal was so thin and malleable, though I wonder if it would have bent in the first place if the metal wasn't so flimsy to begin with. A lot of the pieces are stamped metal and the edges are sharp - handle with caution. 6/10 material quality. The protective film on both the shelves was a nightmare to remove, it literally took me 2 hours to get it off - and I didn't even get all of it, theres still bits and pieces of the film hanging on the underside of the table because I just got so fed up with it. Seruously-this part really really really sucked. 0/10 for the stupid protective film.

This was sturdy and easy to assemble. The most difficult part is removing the protective plastic. It has been a great addition to our kitchen as a prep area with some pan storage underneath.

I dont know why it is that I get so excited that when I find exactly what I'm looking for I always forget to check the reviews??? Wish I had, most are correct that this bench is crap. Mine has the flange on the short side, not the long side as pictured and I'm sure if I use it I'll get filleted at some point as its razor Sharpe. Its light and flimsy. Went together as pictured, no words to read...nice. And it'll take u 3-4 times longer to get the plastic off of it as it did to put it together. Oh and its dented all to crap everywhere. Good luck with urs if ur as stupid as me and keep it.

While it "may" support "some" of the weight advertised it severely lacks structural integrity. I purchased this in hopes of putting my freeze dryer machine on it which weighs about 100 pounds. If you bump against the table there is too much flexing of the legs and table top support pieces. The table rocked enough to where i knew if i bumped against it at the right angle and hard enough the table would collapse. I repurposed the stainless steel table to serve in light duty currently as a parttime holder for my countertop dish washer and as a extra food prep surface.

I am very happy with this item, easy build, perfect for my projects, the measurements were correct. I could assemble it with just myself. It looks great in my kitchen. I think it was a great value for my money. I don't know about the Scratch resistance yet as I haven't used it yet. However it probably is as I noticed they had cut the cover lining to protect it, I was worried that they had cut and scratched the actual product, but when I peeled it all back it didn't have any scratches, so I was impressed by that. So far, I would buy again if I needed it.

As others have stated, this is made w/ some of the flimsiest sheet metal there is. Nothing about this makes tou feel like its "heavy duty". One of the shelf bolts wasn't threaded to the end. Had to come up w a nut and bolt that fit from my stash. The edges of the back splash and corners are sharp and jagged. The plastic protective coating is some of the worst. Top part came off pretty easy. But the shelf took about 30-40 min just to get the protective coating off only to find scratches everywhere and that it left me w sliver thumbs. The table is really flimsy when put together. Make sure you screw the wheels down all the way or it'll wobble like mad. It does hold the shelf i put on it well. Oh well live and learn. I hope the other table i have coming isn't as bad as this one. Same company... not gonna hold my breath. 2 outta 5 stars is generous imo.

Ho acquistato questo tavolo in acciaio per uso professionale e sono rimasto molto soddisfatto per la qualità dell’acciaio . Consigliatissimo.

The metal on the so called backboard ,was so sharp no burr clean off .I had to take a file to it to smooth off but the point on top if ra. Into it you would cut self bad .No good for what I wanted for but will have to keep I put it together. So not very good product.

Excelente muy buen tamaño

I found the assembly instruction images a bit hard to see, but the table is a nice solid table and rolls very easy.

Perfect just what I wanted.Best table ever!!