Furmax 55 Inches Electric Height Adjustable Standing Desk Home Office Desk

Takes 1-2 hours to assemble with the tools given, faster if you have your own. Construction is sturdy and adjustable to your liking. The size is decent as well, I am able to fit a full ATX desktop, two monitors, and basic computer speakers, with room left over. The package itself isn’t too heavy, although you may need another person to help you carry it due to the size of the package. Overall, if you’re looking for a budget standing desk, this is what you should consider. I have no complaints about the product itself, it works as intended and designed.

I replaced my L-shaped desk with this desk, I think this was a good decision for work from home desk. The L-shaped desk was only 18" wide, not leaving enough space for keyboard after placing 32" monitor. Arrived on time, well packaged. Sturdy and good finish, I bought mushroom color. Very easy to assemble with one tool provided with the package. You need second person only to turn around the table, otherwise one person is enough. Top board is in two pieces but becomes quite flat hardly leaving any gap between the two pieces after assembly, see pictures. Very smooth and low-noise movement. The small wood screw heads' hardness can be improved, they tend to loose shape while tightening. These screws are used to tie the two top boards together via steel bracing plates. Some tips for assembly: 1. To avoid shearing of screw heads use the right size of the screw driver that fits well in screw heads. 2. Do not use power tools, better try with the tool provided with the package if you don't have the right screw driver. 3. The tie-in bracing plates' holes don't seem to match the pre-drilled holes in the boards, which is true. But I think this is kept purposely so that the two pieces press against each other well in the final assembly for a minimum gap. You need to work on each of the two screws progressively, do not tighten one screw fully. 4. Follow the assembly instructions specially while assembling the rotating shaft (that transmits motor torque to the other leg), which states to maintain the same height for both legs before assembling this shaft. Better you measure the height and adjust using the adjustment screws at the bottom of the legs. Overall this is a good value for money. In the past I have helped my two sons in assembling their tables, which were of course kind of custom made and much more expensive. For me this one is really a good desk.

Very easy to put together seems sturdy. I put this together myself and waited until my husband came home from work to flip it upright. Seems to work well, can't beat the price.

I enjoy this desk very thoroughly, I've had it for about 2 weeks, and it's done exactly what you'd expect a standing desk to do. Let me give the pros and cons: Pros: -It can go from its lowest setting to it's highest in about 20 seconds -The box came with zip tie/command strip thingies to attach any cords to the bottom of the desk so they don't just hang -It's very spacious and sturdy enough to support a 5'9, 210 lbs man leaning on it when in it's standing position -There is TONS of leg/foot room, and you could probably even store some small objects under the desk and still have uninhibited space -Height settings make it very easy to swap between heights with just the click of a button -Price is extremely affordable -Came with an extra piece for every single screw and bolt in case one went missing Cons: -This desk REALLY likes fingerprints, much like a Tesla Cybertruck, you cannot touch this thing without attaching a perfect fingerprint on the surface. However, it's very easy to clean off with a wet wipe so it doesn't really matter -I have had a small problem with the height settings where it would sometimes wipe the height that I set it to, and I'd have to reset it, but I didn't really read the instructions too closely, so maybe that's user error -The little screwdriver they provided is kinda bad, would recommend using an actual screwdriver when assembling Assembly time was about an hour and a half, but that was after I didn't read the instructions right and installed the desktop upside down (thankfully it was a super easy fix and didn't ruin anything) so if you're more vigilant than I, it should only take about an hour and 15 minutes realistically. All in all, it's an affordable minimalistic desk that has treated me well so far, I would recommend it.

The desk arrived right on schedule and was packaged securely. I went with the black color and the finish looks clean and solid in person. It feels sturdy once fully assembled. Putting it together was pretty straightforward. The included tool is enough for most of the job. You’ll only really need a second person when flipping the table upright — everything else can be handled solo. The tabletop comes in two sections, but once assembled they sit almost perfectly flush. There’s barely any visible gap between them, and it looks seamless from normal viewing distance. The height adjustment is smooth and quiet, which I really appreciate. One small downside: the small wood screws that connect the two tabletop pieces (using the steel bracing plates) could be better quality. The heads can strip if you’re not careful. A few tips from my experience: 1. Make sure you’re using the correct size screwdriver so it fits snugly in the screw head — that’ll help prevent stripping. 2. Avoid using power tools unless you’re absolutely sure of the bit size. The included hand tool actually works well. 3. The bracing plate holes may look slightly misaligned with the pre-drilled holes. That seems intentional to help pull the two tabletop pieces tightly together. Tighten both screws gradually instead of fully tightening one at a time. 4. Pay close attention when installing the rotating shaft that connects the legs. Both legs need to be set to the exact same height before attaching it. Measure and adjust using the leveling screws at the bottom to make sure everything lines up properly. Overall, I’m happy with the purchase. For the price, it feels like a solid, good-looking desk that performs well.

I previously purchased this desk a few years ago for my home office and had no issues with it. Based on that positive experience, I ordered another one for my boyfriend’s apartment. Unfortunately, this purchase has been extremely disappointing from the start. When the desk arrived, the instruction package was completely empty. I had to search for guidance and eventually found a video to follow. After laying out all the parts, I discovered that multiple screws and bolts were missing. At that point, I initiated a return, understanding that a refund would only be issued once the item was received back. However, since I needed a desk immediately, I decided to resolve the issue myself. I spent nearly $50 at Lowe’s and Harbor Freight—making multiple trips just to source the correct hardware and tools. After finally obtaining everything needed, I began assembling the desk. The process went relatively smoothly until I attempted to attach the controller for the standing function. The screws would not hold, and the piece pulled straight out of the desktop. It then became clear that this item had been previously returned and resold. There were obvious signs that someone else had encountered the same issues, which explains the missing hardware and instructions. Despite this, I continued trying to make it work. After completing assembly, the controller failed to operate the desk properly. Upon reviewing the instructional video again, I realized a critical motor mounting component was entirely missing. Without it, the motor cannot be secured, and the desk cannot function as intended. One side lifts slightly before triggering an error, rendering the standing feature unusable. After investing significant time, effort, and additional money into trying to make this desk functional, I am left with a product that does not work at all. I am not willing to disassemble and return the desk after everything I have already put into it—especially considering I never even received a return shipping label. This has been an extremely frustrating and unacceptable experience. I am requesting a full refund without requiring the return of the item, given the circumstances and the substantial effort and expense I have already incurred.

I love this desk. It goes higher than expected. Saves two positions and adjusts fairly quickly. Easy assembly, very sturdy, and plenty of room for all my equipment, and then some.

Thank you! Thank you! Thank you! Just let me list all the good things: 1. Bought it on a limited time deal at a great price. 2. Great engineering: every screw hole lined up perfectly. 3. Clear, simple instructions, and very easy to put together, even for this 70 year old woman. Only time my husband helped was to carry the box to my craft room and to set the desk upright (which I could have done, but husband's do enjoy being needed). 4. So, so simple to connect turning rod to motor. 5. The motor works ultra quietly with very smooth lifting and lowering. 6. Shipped quickly and arrived earlier than expected. 7. It was packed so well that even FedEx was unable to destroy it. That in itself is amazing. 8. All the pieces were in perfect condition, and hardware so clearly labeled that a 3 year old could easily be your helper. Each packet had exactly the right amount, and there was a second packet labeled extras, which was very thoughtful. I purchased the 55 inch desk, which is perfect for my crafting, and when I want to sew, I raise it to the higher level to cut out fabric, which makes it a lot easier on my back. I enjoy making wreaths, diamond painting, sewing and I paint with acrylics on canvas. It accommodates all those things, but would make a great computer desk too for the office. Now for the bad points: Uhmmmmm... Oh wait ... There is one. I didn't particularly like the cover for the hole that cords go through. But then again, I don't use the cover so Nope, not a bad point for me.

it came next day of ordering and i Assembled it very easy with the manual everything is good quality and as described very good product

Incredible value - my first such desk and I love it. Of course, at this price some compromises had to be made... There's no cable management, and at full height the desk shakes quite a bit. There's only two memory slots (which is fine for me, but less than other tables). The desk moves up and down at a decent speed. It isn't too loud (I don't know how loud they should be but I'm not bothered by it). So far it works great - the quality of the top table is solid - it's made of a hard (engineered?) wood - won't scratch easily. I've accidentally brushed a knife edge against it and not scratched it yet.

easy to set up and great for the price

I did not opt for assembly so had to do it myself, initially it felt a little complex because there is no alphabets on desk legs so you have to look at manual and figure out from shape which wasnt that difficult. The screws had alphabets and the step by step guide to assemble was easy to understand. They had also provided the tools you would need to tight the screws up and had given small cable managers that you can stick at bottom of the desk for the wires to look clean. The motor runs very smooth. It has a sleek look and the black colour is consistent throughout the body. There will be a line in the middle of the desk since two planks are attached for the top but honestly the line does not look bad at all. I am 5'3 so the max height adjustment ends at a perfect height for me. Very stable doesnt rock at all. Do go for it! :) I hope the motor keeps working perfectly fine.

Motor is working fine but table top wooden is already broken