32 Stainless Steel Blades Feeler Gauge Dual Marked Metric and Imperial Gap Gauge

Well made and well worth the money

So I buy these to use as source/base material for making my own tools for Locksport / locksmithing, and I always just grabbed whichever was cheapest and had the sizes I liked and I just did not everything or believe that there was any real difference from one set of gauges to the next and they're being cut up ground down and sanded anyway but there definitely is a big difference and this is the nicest set of feeler gauges of this type/style I have gotten so far. The metal is just better I don't know any other way to put it and it actually has a finish on it it's much nicer looking and while it was oiled, it was not drenched in greece/oil all the other sets I've gotten so far I've had to take out of the packaging and then individually blade by blade, wipe it clean with a paper towel and again I'm grinding and sanding things down into tools so oil is my friend LOL but even then too much LOL not the case with this set and again the finish they actually took the time to put a finish on these I'm very impressed and this will be the specific set of this style of feeler gauges I buy every time from here on out

I was a bit hesitant seeing how cheap this was, but figured I would give it a try. I have digital calipers from a reputable manufacturer, so I figured I would just verify before I actually used it. Message to sellers/manufacturers: PEOPLE LIKE ME WOULD BUY BETTER IF OFFERED I don't want to pay $100+ for a feeler gauge set, but I'm not looking for the cheapest option either. I would really like to be able to buy a product like this and be able to trust that the claims on their product page would be honest.... Too many times have I been BURNED pretty hard on some purchases, but this one seems like it worked out. My table of measurements: Expected Measured Percent Error 0.880 0.900 2.27% 0.040 0.044 10.00% 0.050 0.055 10.00% 0.060 0.060 0.00% 0.080 0.083 3.75% 0.100 0.096 4.00% 0.130 0.112 13.85% 0.150 0.149 0.67% 0.180 0.177 1.67% 0.200 0.204 2.00% 0.230 0.219 4.78% 0.250 0.239 4.40% 0.250 0.243 2.80% 0.280 0.272 2.86% 0.300 0.291 3.00% 0.330 0.351 6.36% 0.350 0.337 3.71% 0.380 0.396 4.21% 0.400 0.392 2.00% 0.430 0.440 2.33% 0.450 0.438 2.67% 0.480 0.482 0.42% 0.500 0.492 1.60% 0.530 0.526 0.75% 0.550 0.545 0.91% 0.580 0.593 2.24% 0.600 0.602 0.33% 0.630 0.638 1.27% 0.650 0.639 1.69% 0.700 0.677 3.29% 0.750 0.793 5.73% 0.800 0.797 0.38% Multiple measurements were taken for each gauge, not measuring over the edge. Measurements were a reasonable "average" as the gauges aren't perfectly uniform thickness (expected with literally everything, just want to make sure people are aware). The majority of the gauges are just fine, some could definitely be better, but for the price, it's very difficult to complain, only that there isn't a more "premium" option with better tolerances available. There are other reviewers that claimed some of the gauges are way off, which I thought I had experienced as well, however, putting together my table, I noticed I didn't have all 32 gauges recorded. Some of the thinner gauges were just perfectly stuck behind other ones that I easily missed them trying to get measurements of them all (I thought I was being pretty careful too on my initial pass). Just try to make absolutely sure there aren't two of the super thin ones stuck together like I found about 4 pairs of. It's nothing bad about the manufacturer's process, it's just what happens with thin sheets of metal with oil on them.

Good low-price and reasonable quality feeler gauges. The accuracy is close to what is advertised - a few were a tenthousandth or two more than specified when measured with a Mitutoyo digital micrometer. They are not hardened as I can scratch them with a file BUT they are not advertised as hardened. They do come covered in oil but it also states so in the advertisement - get a rag or shop towel and wipe them off. Not a big deal. The sizes appear to be laser etched and very easy to read except for the smallest sizes where the etching can't go very deep. All the sizes were included with no omissions or duplicates except the .010 size which comes in both brass and steel. This is a feature, not false advertisement as one reviewer put it. The gauges are mounted in a frame and held together with a nut and screw. The nut will easily loosen. Get a nylon lock nut if that is an issue for you. This is a good set for casual use. It is not for the professional mechanic and you shouldn't expect so at this price level.

These are excellent feeler gauges. There is a good amount of variety of the different sizes. Having the different sizes available for adjusting the valves on the motorcycle was very helpful. They are made of good quality metal and should last a long time. The thinner ones do allow for a slight bend to occur which is perfect for my valve adjustments. They get the job done. The little nut holding them together allows them to be easily removed. The blue plastic "holder" is a thin plastic and will likely rip easily, but that is not a concern to me. What's important is the quality of the tool itself and these work perfectly. They are very reasonably priced and I would Highly Recommend this product.

They come oiled in a plastic pouch and have worked fine for me. Not much else to say.

I just received my set of feeler gauges, and I made 5 random checks from the thickest to the thinnest leaf (5 measurements on 5 blades with an Etalon brand, Swiss made caliper claiming to be accurate to +/- 0.001” or 1/1000”). The caliper is not the best tool for measuring thickness on sheet metal, but it’s the most accurate measurement device I own. All 5 measurements were just a hair high (much less than 0.001) which I attribute to the flat jaws of the caliper being dirty. Every measurement was over the mark by the same amount, so there was no variance. I like the way they have a thick blade outside of the first, thinnest blade to protect that foil-thin blade from damage. I need a gauge, and this exceeds the quality I need. I’ll use my metric caliper to verify the millimeter markings and update this.

They are a bit oily but for the price its the best feeler gauge you can have. Easy to read, lots of measurements and exceptional build quality.

Sembra di buona qualità (tralasciando il fatto che è arrivato tutto unto), l'ho usato per controllare il gioco valvole della mia moto e ha funzionato bene.

I don’t think this could get any cheaper, or nastier. Pure junk. I thought for this type of product, you couldn’t go too far wrong. It arrived in pieces too. Don’t say I didn’t warn you 😉

Es de muy buena calidad, viene aceitado para evitar oxidación y asi debemos mantenerlo. Sirve muy bien para medir espacios "gaps". Viene con medidas métricas e imperiales hechas con laser.

Perfekt zum einstellen der Ventile am Roller. Sehr genau und der Preis stimmt auch. Klare Empfehlung von mir =)

良品