AlbaChem Heat Transfer Vinyl Letter Remover - No. 1020

This product worked excellent loved it. Followed the directions by squirting on the material. Let it sit for a few minutes. Gave my material a little tug in every direction and it came off without a hitch. I did not have to scrape or peel. It just fell off. Make sure you wash your material after you’re done it smells.

Arrived quick, the cap was loose in the box but was still there. It works great and took off the glitter letters with ease and no residue left behind at all. Took maybe 10 minutes tops to do a whole sweatshirt. Super simple steps to follow: 1. Puncture top and add cap 2. Saturate underside (inside) the shirt to break the bond of material and fabric. 3. Wait a tad and you'll see it bubble and release. 4. Remove HTV It does have a strong smell, so use in a well ventilated area (as instructed on the can). I have nothing bad to say about it at all. 100% reccomended to use for removal of heat press vinyl.

Releases all the vinyl I use so far. A little goes a long way. Keep in mind, depending on the vinyl used, how long it’s been applied, there may be some discoloration left behind.

Had great success removing a DTF print. Only negative is some of the color from the DTF transferred to the shirt and one section left residue. It was a large image and maybe I should have worked in smaller sections. The product arrived dented and the nozzle was broken so application was messy and now I have no way to close the bottle.

Excellent

This stuff worked amazing. I applied it to the front of the vinyl and within maybe 30 seconds you could see the vinyl crinkling and starting to loosen. I then scratched it off with my fingernail with no issues. Everything came off the white onesie (I had black and light blue on it). There is white residue left on the black however (this was a black canvas bag and the same thing happened on a 60poly/40cotton black tshirt). Please ignore the dog hair...it happens! It was a little bit more difficult to scrape off a 10" round full design but with time and scratching it all finally came off.

First of all. It did not work. At least for me it didn’t. For comparison, I had used Siser Vinyl for my shirts. The issues I had were; -The glue didn’t come off at all. The entire layer of glue remained on the shirts. Which was sticky To the touch, untill the VLR dried. Then I was left with a dry layer of glue of the exact design I just removed. - The vinyl itself got a little too dissolved (I left one shirt sit for longer to see if it’d solve the glue issue) but it made the vinyl weaker and caused it to “smudge” into the shirts. - And lastly. The VLR left a sort of stained ring around the part I poured the VLR. So. It removed the vinyl but still ruined the shirts. Again. I see that a lot of people had great results. It could’ve just been my luck to get bad results. Had it worked? For 20 something bucks. Definitely worth it.

It WORKS! SAVED a shirt! Read the directions! So glad I had it in hand!

Tutto bene

Does the job

Works great !

Parfait enleve le vinyl et eleve meme les résidu de colle j'ai frotter avec une débarbouillette PARFAIT RIEN A DIRE sauf que sa buzz un peu le cerveau😅

Applied to back of vinyl numbers on football shirt and a few seconds letters lifted of shirt. Recommended