Kohree RV LED Ceiling Lights Interior, 12V DC Double Dome Light Fixture for Camper Trailer Boat - 5 Pack, 600 Lumens, 4000K Natural White, 3-Way Switch

I had one of my many 12 LED lights blow out in my trailer. For the size of the trailer, they always seemed too dim and they made up for it by putting a dozen through the main area. I decided to get this 2 pack and replace a good single light in the bathroom with a new dual light. I then took the original single good light and replaced a bad one. Wow, what a difference! It is so much brighter in the bathroom with both on and really lights up the shower. And when so much light is not needed, I like how you can just turn on one side of the light. Old single light was 400 lumens. The new one with both lights on is over 600 lumens. I replaced that bad light with the single good light. I then swapped out a single good light with the other dual light from the 2 pack. Again, what a difference. So much of a difference that I'm going to swap out all of my single lights with these new dual lights. It is going to make so much difference and again, I think it's great that you can just turn on one side if you don't need that much light. Installation was simple but I found odd that it has 8 screw holes but only came with 4 screws. I ended up reusing some of the old screws. Ample wire leads with the new light, so there is no issue there trying to wire them in unless the existing wiring (like how mine is) is short and difficult to get at. Installation for each light was less than 5 minutes. Only had about a week, so I cannot speak for the longevity of the product. If they blow out prematurely, I will certainly update my review accordingly.

I have had these for over 4 years now (I like to wait a while before I write a review) and they have honestly been great. I used them in a camper and a horse trailer. Great product! Nice and bright too!

Couldn't be happier. Simple to install, reasonably priced and--best of all--they work great. At a minimum, you will need Philips (and perhaps flat blade and square drive) screwdriver, side cutters, and wire strippers. Mounting screws and wire nuts are included but I found them way too small for my application. A quick trip to the hardware got me #12 screws and medium and large, yellow wire nuts. I also used an electric drill to bore out the mounting holes in the new light bases to accommodate the larger mounting screws and to remove the old screws from the old fixtures and to drive the screws for the new lights. I also used black, plastic tape to wrap the wires and wire nuts before stuffing them back in the mounting holes. Used scissors to cut the tape. I would estimate about 10 minutes or less to remove any old light and mount the new one if you are prepared with whatever you might need. Remove the old light fixture, clip the negative and positive leads, and strip about 3/8 inch or so of the wire. Be careful not to touch the leads together if you didn't remove the coach batteries or flip the breaker to off. I left mine all connected and was simply careful. Remove the new light from the box then remove the lens by squeezing the side nearest the switch. Remove the protective wrap from the lens. I drilled out the mounting holes next. The new light has two non-polarized wires which make connection simple. Twist all the appropriate wires together and screw on the wire nuts. I wrapped the wires with black plastic tape at this stage. Check to make sure the new light works properly. Stuff the wire nut portion of the wires back in the hole. Make sure you won't puncture a wire and screw the new base back in position. I found that enough of the old holes lined up to make the installation neat. Put the lens cover on, outside edge first, then pinch and mount the portion of the lens next to the switch. I also used the single LED Kohree lights to replace the old reading lights in the bunks and such. Enjoy!

If you are like me and run off RV batteries a lot boondocking, you went to LED bayonet base bulbs as soon as they came out. Given that one incandescent bulb is over an amp draw, LED bulbs at 1/10th that were attractive. It got so that I could run every fixture for the energy cost of any 2 regular bulbs. But, we soon discovered that the LED festoons started dropping panels, or blinking rapidly and since they were $12-$20 EACH - what a rip. Fast forward 8 years to now and everyone has LED lights but this company is making them as SMD panels custom fit to the bases. and unlike the 'space age bases' that have to look all Jetsons and not cover up the old holes, these are very flushmount rectangles that cover the old holes. It appears they are also AC capable meaning, there is no polarity when hooking them up. (but if you must and dont want the voltage drop of an extra diode, the line that has 2 wires coming into it is common aka neutral aka ground.) these put out a lot of light and the price here of each light is less than the price of 2 LED bulbs which dont have the best track record. I just installed them last night so cannot comment on longevity, but this being the future, as compared to 8 years ago - I am optimistic. since they are arranged in a panel as a X by Y array, the heat from one, does not interfere with the other giving runaway thermal conditions the other ones suffered from.

Simple and inexpensive, these were great for replacing the cupboard and closet lights in my RV. Easy to install and provide great illumination.

I needed replacements for 2 incandescent lights in our camper. I purchased these lights because their size and style was most similar to the original lights as they would blend in well. The lights arrived in sturdy boxes and they are well built for their application. These lights are very bright, much brighter that the old bulb style they replaced. These are a very pure white, not as warn as I would normally look for - but I knew that as the frequency is clearly listed at 4000 - 4500k. These fit well and I was please with the look of the lights - they were a good match for my needs. I did have a problem with 1 of my new lights not working properly, one side would not stay lit, It turned out to be a problem with the switch. When I contacted Kohree they quickly responded and resolved my issue to my complete satisfaction. There utmost concern was that I was happy with their product and service - very refreshing to deal with a company having those values. I recommend these lights and I most definitely recommend Kohree.

These are super easy to install, and completely change the ambiance of the room. They aren't hot as incandescent lights, and don't use as much power, and the selection of colors make these a must have.

After reviewing many different lights off of Amazon and other websites and if you dealers especially Camping World I ordered one of these to see how it was and it's just an absolutely great light after the first light I ordered I came back to Amazon and ordered lights for my whole trailer I've completely redone all of them these lights are beautiful they fit perfectly I'm completely happy with my purchase and I would highly recommend these lights to anyone needing to update or upgrade your Lighting in your camper or RV or any small area where 12 volt is available these lights are bright they're great the units they're made with do not go bad after a couple weeks I bought a set of value lights and it was a horrible experience they started flickering flashing and going dead within just a few days never again Corey makes great lights and I love these

We ordered these lights earlier in the year for our trailer which is a bit older (1996) to replace the original lights. We tried replacing the bulbs with LED's, but, they still weren't bright enough for the kit when area. These lights are amazing! Easy to install and so bright! Ordered a second set for the bedrooms...what a difference they made!!! Highly reccomend them!!!

Está bien el precio y el producto es el esperado Lo usé en un motorhome

Easy install, and not sensitive to polarity. So, just connect the two wires to power, and drive a couple of screws in to hold it, snap the lens on, and your done. Came with everything needed for install. A very nice light, and we prefer the daylight color so these worked out very nice for our camper.

I have an old 5th wheel trailer that we use as a bunkhouse. I tried replacing the old bulbs (that constantly burn out) with led bulbs but they didn't work. I installed these lights and they work outstanding. Very easy to install and very bright. Time will tell if they last.

Installed these myself in our Jayco Jayflight trailer. Larger then the average light dome, but amazingly easy to install with the no polarity wires! They produce excellent light without being overbearing. Each one has its own switch so you can easily only have one or two on, instead of the entire trailer. I will be buying more to replace the remaining ones in the rest of my trailer.