Neoera Magnetic Door Stopper, Updated Hydraulic Shock Absorbent Technology, Soft-Catch Magnetic Hold, Premium 304 Stainless Steel, Anti-Rust, Heavy Duty for Various Door Types, Wall Mount 2 Pack

INSTALLATION TIP: DOUBLE-SIDED TAPE AND HOT GLUE ARE YOUR FRIENDS TO MAKE THIS A SMOOTH INSTALL. Get yourself a roll of double-sided tape and some hot glue to do this installation. The two components (the larger stopper on the wall side, and the smaller catch on the door side) have mounting plates which mount completely flush to the wall and are contained within the body of the units they are holding. The stopper has a mounting plate and a completely threaded headless screw. You would mount the plate to the wall, screw the headless screw into the mounting plate, and then screw the stopper on to the headless screw. The trick, of course, is figuring out where to mount the plate. So here's what I did. It's probably needlessly complex, but it worked really well for me: 1. Start by removing the mounting plate and the headless screw. 2. Screw the headless screw into the mounting plate. Make sure it does not extend past the bottom of the mounting plate. 3. Using some hot glue, glue the screw to the plate on the underside. There is a small divot where glue can sit. 4. Once the glue cools, screw the assembly into the stopper, leaving it just barely above flush with the bottom of the stopper. 5. Stick a strip of double-sided tape on the bottom of the mounting plate. 6. Position the stopper where it will be mounted, and press the mounting plate into the wall. 7. Carefully unscrew the stopper from the mounting plate assembly. The assembly should remain stuck to the wall with the double-sided tape. 8. Secure the mounting plate to the wall with its included screws/anchors as needed. 9. Reattach the stopper to the (now fixed) mounting plate. Now, for the door catch. The mounting plate for the door catch is threaded, so it doesn't require a separate headless screw. The mounting plate screws directly on to the catch. For this part, follow the instructions in the box to weaken the magnet by using the included rubber glove fingertips. 1. After weakening the magnet, screw the mounting plate into the catch until it is just barely protruding from the bottom of the catch. 2. Stick a piece of double-sided tape on the mounting plate. 3. Attach the catch assembly to the stopper allowing the magnet to hold it in place. 4. Open the door into the stopper/catch assembly. The double-sided tape will engage on the door. 5. While holding on to the catch, separate the stopper from the catch. The weaker magnet aids you here so that you don't pull the catch mounting plate off of the door. 6. Press the catch into place on the door firmly. 7. Carefully unscrew the catch assembly from the mounting plate. The mounting plate will remain stuck on the door with the double-sided tape. 8. Secure the mounting plate to the door with the included screws. 9. Reassemble the catch; adjust the strength of the magnet to your liking. Maybe I made it too complicated, but this method worked well for me, and I was able to position the catch and the stopper exactly where they needed to be. Hopefully this helps you to have a more pain-free installation. (EDIT) This stopper/door catch is ROCK SOLID. It works amazingly well Ideally, you never want to have to think about it unless it becomes necessary, which happens in one of two ways: 1. someone opens the door too forcefully 2. you need to hold the door open And this door stopper is just genius. The piston mechanism in the stopper slows the door down just enough that even if it is opened forcefully, the stopper slows it down before it bottoms out. And the magnet is strong enough to hold the door securely open (even solid core garage doors) until you are ready to close it. If I could give it six stars, I would.

This door stopper works perfect. I bought this catch because of the height. Needed to catch a door that is outside and slightly elevated. I highly recommend this brand. It is solid and eld the door open. The magnet is strong, (the door has automatic closer). I think the price was very fair for such a quality product.

No need for doorstops to hold the door open when the window was open. The wind would slam the door. These were super easy to install. Strong magnets will do the job. Love em!

This is a good idea for a door stop. It combines both the magnetic and a spring loaded shock absorber. Easy to install and loved the idea of a latex wrap to reduce the magnetism. Worth buying!

Instructions are clear, nicely made, but don't cut yourself! The machined edges of the flange have not been deburred so they are very sharp.

Good quality, easy to install, and it works great!

I just installed this door stop onto my front door. The wall was stucco over concrete and the door was a thin metal clad over wood core. I used the included masonry anchor which measure 0.3" in diameter. I used a 5/16" drill into the stucco/concrete. That worked very well. I then lined up mount of puck on door by attaching a strip of double sided tape to back of puck. After disconnecting door stop from puck, I unscrewed puck from its mounting plate. This gave us an accurate alignment of holes for drilling of pilot holes. Unfortunately one of the two holes missed the core and was held only by metal clad. In hindsight I should have drilled a series of very small holes into door before starting to locate the core. Once finished we learned that the magnetic strength is very strong. Two thin rubber covers are included which can be applied singly or double. Even one cover substantially decreases magnetic strength. We will test with one cover to see if wind ever causes magnet to disconnect. In summary we are very happy with this product. Two highlights which distinguish this product from others are: 1. Three surface options included to attach door stop: sheetrock, wood, and masonry 2. Two cover options to decrease magnetic strength if required

Great product. Work as required. Magnet is bit strong and that's what it needs to be.

I was very surprised by the high quality of this stopper. The metal is thick and the finish or nothing short of awesome. The design is very well thought out as it has dampening in multiple places, including a hydraulic mechanism. It works seamlessly with our auto-closing garage door with plenty of magnet strength to spare. And it looks like a million bucks! Very highly recommend!

One of the best purchases I made in Amazon. The hydraulic function integrated in this product not only produces quiet operation but feels like the door stopper is not there at all.

I purchased this magnetic door stop for an outside door that was awkward to access for a more normal ’hook and eye’ type catch. I can confirm that it really works, holding the door open on all but the very windiest of days (I live on the coast and it gets very windy here!) I suggest that you fit the ‘ball’ to your wall first. Then a dab of nail varnish or paint on the ball will easily mark the location on the door for the ‘cup’. Screw the cup to the door and enjoy. The door stop is very good quality, it has now been exposed to salt laden wind for about nine months and it’s still bright and clean. Additional information. After owning this for a year I can now add that the “ball” part is actually chrome and has rusted. The rest of the unit is still good. The corrosion doesn’t stop it working so I won’t change my star rating.

Very handy door stop. Magnet holds door open when bringing in groceries. Just pull the door closed when finished. Hydraulic mechanism is a nice touch. Wish I could have found this item 20 years ago. Highly Recommended.

Bought two of these to hold conservatory door open. They are certainly very well made - but so they should be at the price. They are more than double the price of others. But, we live right next to the sea and am hoping that they stand up to the weather and saltwater. Tried others and they were a lot cheaper - they were no match for these. They look and feel far better quality. Only time will tell if I have been screwed.