Wood & Fiberglass Primer

Great product! Used as primer on semi-green pressure treated fence there was no doubt that it was a great sealer. Finished with sherwin-williams exterior paint. Great finish and quick drying time although I let it dry 12 hours before finishing. Coverage was good considering the green wood. Would cover great on kiln dried wood.

The hardest part of the job was the sanding. I sanded for 2 weeks because I wanted a very smooth surface. I first put on two coats of primer waiting 2 days in between and then two coats of top coat. The outcome was beyond my expectations. I chose to ignore the Amazon reviews about how slippery it was when wet. First shower I ended up going to the ER by ambulance. I did the splits getting out of tub from slipping. I used gorilla tread tape on tub floor and I'm very secure showering now. This paint leaves a beautiful finish just follow your directions carefully and you will be as pleasedas I am.

product worked well over previously finished boat with proper prep and cleaning, my biggest concern was with packaging. This is the third Qt. of product that i have ordered ( 2 of primer ,1 of finish coat) that the cans arrived dented, true there were no leaks but I feel that a little more care could be taken when preparing for shipping

Update: primer is very good but Amazon's packing is the worse I've ever seen!.......................So my primer and white paint came i today for my RV. White gloss as least had some air bubble packing....half were deflated... but just one can was slightly dented.....My 9 cans of primer did not do so well as they did not put any packing in it! Good think it had metal clamps holding the lids on or it would of been a huge mess! I did not see any leaks and at least the paint was shaken up well for me ; ) I'm going to use it as it and hope Amazon will take back any I do not use!Reason I kept it as another guy posted that he had the same problem... sent it back and had the same problem once again! Multi cans of paint and Amazon warehouse packing do not mix well ; )Do you think Amazon will respond to this post? Probably not.I will update how the paint turns out on my RV maybe post some more pics tool

This saved me thousands of dollars! I’ve trying to get a contractor come give me a bid to replace the shower stall, they never showed! So I came across this and thought I’d give it a try.-the primer is thick and settled on the bottom, my husband put an attachment on his drill and in less than 5 minutes, it was mixed and read to use, no big deal-it is extremely strong, we have no fan in the bathroom, 4 days later I’m still flying high 🤣 probably should have masked up or used a fan-I sanded the fiberglass shower with 220 grit, then used a cloth to wipe it off, then started priming.-cranked my thermostat to 75 degrees, the primer dried and I started painting within an hour. On my 36” shower, I had just enough primer to do the walls and pan with one coat. Then I used the Rust-Oleum paint and did only one coat, had leftover paint from my one quart can. It was close with the primer, I was definitely sweating running out, but one quart accomplished the job.-start to finish including sanding, primer, and paint, only took 4 hours-End result…. I spent $70 and it looks like a new surround, wish I had done it 2 years ago when I bought the house!

Purchased for a badly worn fiberglass tub (tub had been previously refinished). Do the prep, rough and fine sanding, vacuum rinse and wipe down. Wear a good mask (organic) I use lots of oil paint and this made me loopy. Check out my soda bottle funnel to keep the spout from dripping in the tub (sweet). Roll it on with low nap mini roller, corner touch up with brush, let primer cure full 72 hours, sand primer coat, vacuum and wipe with mineral spirits. Paint on the sister top side coat (color of your choice), two coats and you might want to put in the grit for tub, finish is slippery. Wait the full 72 hours, I could only do 48. A good paint store may tint the primer for you (if they like you). Don't use a bathmat or at least take it it out after each shower. The trapped soap and mold under the bath mat will eat into the finish. Not right away but it will. There's enough primer in one qt. to do entire tub and surround. You would need two quarts of topcoat in order to do two coats on the tub and enclosure, especially tan over white primer. This was for my mother so she only got the tub done. Just kidding, it's a rental property and I don't want to spoil them. They'll be asking for an indoor toilet if I did the whole thing.

This stuff is like clay. Can was dented an taped over like it had been a return from someone else. Did the proper prep work to shake/mix. First part of can came out very watery. The rest was like clay mud.

Dries to touch super fast....Great primer....You have to work quick though if you are rolling inwarm temperatures.

Easy to work with and fast drying.

It worked just fine

I received this can of Primer from Hoerr Racing Products today with a sticker on the lid noting that the product “settles” and mixing is needed. This primer was SOLIDIFIED not “settled”. I would guess this can sat on a shelf for a year before being sold. It took me 45 minutes to hand mix before it was useable. I get it that paint/primer can settle and require hand mixing but this wasn’t normal settling. If you sell Paint; put it on a shaker before you put it in the box PLEASE! 1 star for the Service; not the product!!

Covered well. Very thick sediment in the can so needed to be stirred using a drill attachment but not a big problem.

Not sure what happened to can, maybe froze, or way to old. Paint was runny on top and bottom of can, middle was like set jelly. Took to local hardware store for a 10 min shake in their paint machine followed by another 15 mins of stirring, shaking at home. Paying $80 for a quart then straining out lumps, goo parts for a final product of half quart was not what I ordered.I refinished a shower surround, would not recommend this product.