AUTOXBERT 38cm/15 Inch Hand Sewing Steering Wheel Cover Breathable Anti-Slip Leather Steering Wheel Cover for Nissan Qashqai Toyota Camry RAV4 VW Golf

great fit, not too tight on a fiat panda (04) steering wheel. did not sew through the stitching but used blunt leather needles and sewed through the holes on the edge of the cover. used two needles, thread cord and put through 2 adjacent holes from the outside in, carry on round the wheel and pull tight and tie off when you get to a spoke( an assistants finger helps, like tying a bow) sew through the holes past the spoke , outside to in on the first pair of holes and pull tight and tie off, carry on sewing like this all the way round. pull tight til the edges nearly meet and the thread makes a very good seam and excellent grip on the cover. looks great and the grip is improved no end, perfect for older cars. sewing like this is a lot harder than some covers state but the end result is more professional and less likely to go wrong. just take your time and it does work.

Perfect fit for my steering wheel as per the measurements in the product description. Plenty length of ‘yarn’ supplied to stitch all way round, and needle included as well. I stitched through the holes in the leather that the edge stitching goes through, rather than try to catch the edge stitching as the instructions seem to suggest. My old foam steering wheel was starting to wear in places and this cover makes it look better than new. The soft leather is really comfortable and doesn’t slip on the wheel or in my hands. Its for a specific sized steering wheel so make sure you measure before buying.

Nice look and easy to fit it. Took me about 30 minutes to do it but I like the final result. It doesn’t really feel like a genuine leather but will see after couple of months if is a original leather or PU leather. More than enough Thread but slightly different colour. I see some reviews saying that not enough thread but you need to connect the STITCHES tougher from both side only so one meter should be enough and do not double it for no reason as the thread is very strong. Only 4 stars as it doesn’t look genuine leather but seems to be strong anyway

Very good quality for the price, looks good in place

Cheap and nasty plastic, despite stating that it was leather I returned it

My wife wanted this for her car, and according to her, it was fairly simple to do, and it looks amazing. She also says the steering wheel feels so much better now.

Really pleased with the cover. Arrived quickly so I got on with getting it fitted. I have a Nissan NV200 which has a thin steering wheel, I thought it might be too big in this regard, but it fits very well. It takes about an hour to sew together and can be a bit fidly being black,k with black thread. But take your time and work methodically and you should get a good result.

Firstly, it's not real leather, it's "Pleather", so that's false advertising. All the packaging says it's leather too. The stitching around the edge (seams) is not finished properly, so you can't stitch it through those as the video suggests because they come undone and pull away. So, I stitched it through the holes where the seams are (properly). I had to dive into the sewing box for some better needles and hook needles to make the job easier because the needles included are fairly blunt. It wasn't quite wide enough for the seams to meet properly on my steering wheel, and you can't pull it too tight, because it rips, because it's "pleather". My stitching isn't great because I suffer from a touch of OCD, so it's untidy in places where I had to double/triple/quadruple stitch because... it's pleather, and it ripped trying to pull it tight. 2 Stars because I got what I paid for... and it's not "horrendous" Lastly, I recommend paying a little more and crossing your fingers that it's a little better than this.

This steering wheel cover looks really good and was real easy to install. The hardest part is getting it onto the steering wheel, but stitching it together is easy, you just go through the stitching from one side to the other. It made my wheel feel a lot nicer and is good value for the money. I highly recommend this cover if you want a nice OEM looking option that fits well.

Fits really well, takes about 1-2 hrs to thread on depending on your thread and needle skill… I learned to thread the needle into the outer loop then straight through the inner loop (then pull the string all the way to tighten) : think about it like threading ur shoe laces, and dont pull it too ahrd otherwise it could snap, however the leather is really strong! Great product I love it! Very slim material and a snug fit onto the original steering wheel- a lot better than buying a cover from auto stores that cost triple the price and are thick and looks worse. ( Toyota Corolla 2019 Ascent Sport)

This fit very well on my Hilux steering wheel. Nice and thin, so it is a good repair when your steering wheel starts to peel. Advice is when you are stitching it on. Start at the seem, so it lines up when you complete your way around the wheel. Be prepared for slow repetitive sewing to get it on and to make sure to keep your stitching tight. If you do, it is a nice feeling cover and none of the stitching pulled through the fabric.

Paßgenau Mensch sollte Handnäherfahrung haben,wenn es schön werden soll. Ich habe ca 1h gebraucht und von Automenschen Lob für die optisch ansprechende Arbeit erhalten. Das ist jedoch auch dem beigelegten Werkzeug (Nadel, gewachster Faden) zu verdanken. Das Plastelenkrad fühlt sich mit dem Ledercover richtig gut an. Auch im Winter ohne Handschuhe. Und sieht gut aus. Die farbige Naht macht was her. Dieses Cover und das Einnähen war ein Geschenk. Der Empfänger freut sich darüber, wie schön sich das Lenkrad nun anfaßt. Kein Schwitzen im Sommer, kein Frieren im Winter.

Der Bezug ist im wesentlichen wie beschrieben: außen sowas wie Leder, fühlt sich ok an, ist aber schon sehr dünnes Spaltleder. Darunter Kunststoff-Vlies. Das polstert ein wenig, wäre bei den heutigen gepolsterten Lenkrädern eigentlich nicht notwendig gewesen. Das Vernähen war einfach, ich musste allerdings mehrmals rundum nachspannen, da ich mich ob des Materials nicht getraut habe, die Naht direkt beim vernähen so stramm zu ziehen wie sie muss. Hat alles in allem etwas über 2h gedauert. So kann man das zuvor recht abgegriffene Lenkrad jedenfalls wieder benutzen, ohne dran festzukleben.