Junction Box, Zulkit Project Box IP65 Waterproof Outdoor Box ABS Plastic Electrical Boxes Electronic Enclosure Black 7.9 x 4.7 x 2.2 inch(200 x 120 x 56 mm)(Pack of 1)

This box works great for small electrical projects. It's easy to drill through while being durable. I wish it was a matte texture instead of glossy, but no real complaints with it.

used this to house a small ESP-based microcontroller and relay for a lighting project. gasket fits well and makes a solid seal. i drilled a hole to accommodate some wiring though and it was easy enough to drill with a standard bit. be aware the inner dimensions are not perfectly rectangular due to the screw holes in each corner. sturdy, solid construction.

Missing a screw, but other than that it should work. Seems sturdy. Should have shipped the box closed with all four screws attached. instead, it had two on opposite corners and one loose inside the box, probably how the last one got lost.

This case was perfect for my project. I had to machine it and it did well. The only drawback is the case finish is real smooth, so it shows marks and scratches easily. I decided to change it to more a matte finish by light circular polishing with a kitchen plastic scrub pad. It takes a little time to get it even, but it is better about scratches.

I used this project box to enclose and mount a 3-3/8" digital GPS gauge on an older UTV. The exterior finish, quality and stainless hardware are perfect for the application. Highly recommend!

Custome project box. Worked great.

I'd take off 1/2 Star since you have to install the gasket and it isn't a continuous gasket, but the box is sturdy for being plastic, has stainless screws, and is offered at a decent price. I will buy more. I'm using one box to mount a buck converter, on/off switch, and 9vdc power jack with a battery converter mounted on top for a Milwaukee Fuel battery. It provides ample, clean power for guitar pedals. The batteries last many gigs before needing a recharge, it's easy to carry a spare battery and it eliminates searching for a 117vac outlet, ground loops and having another power cord on the stage. Use a daisy chain, plug and play, excellent clean power and far less expensive than the regulated, filtered power supplies they try to sell you. FYI, you can do the same with a DeWalt battery adapter, or any other. You'll need this box, the battery adapter (they come with on/off switches and fuses), a buck converter and a DC out jack. Tools; a drill and bits, screws to mount the battery adapter, a soldering iron with solder, and a multi-meter to set the buck converter voltage. Not difficult to do.

Enclosure purchased: "4.5 x 3.5 x 2.2 inch"I typically make my own enclosures but I wanted to buy one this time. This enclosure is nice, the finish is a mild/moderate gloss, it ~seems~ well-waterproofed (my application won't be submerged), and it came with multiple standoffs built-in.The enclosure I bought (here in January 2023) had 6 standoffs. One in each of the 4 corners, and one centered between two on either short end. I just cut off the middle standoff on one end for my use.The schematic for this enclosure appears to be accurate in measurements (aside from standoffs not matching the photos, but I didn't expect standoffs to match my circuitry in this one anyway).My circuitry didn't match the standoff pattern so I made my own. The enclosure top and bottom thickness is 3.8mm and I was able to drill+"tap" holes for some motherboard standoffs, without drilling through the bottom of the enclosure which I was happy about. I used a drop of JB Weld on each to be sure.I appreciate the thicker bottom and top.My only wish would be covers for the screw heads on the enclosure's top. The bright shiny metal messes with the color flow. But paint or even a Sharpie should help, it's not even worth listing as a con.I'm just getting started with this enclosure but it seems like it'll be exactly what I was looking for.

Le quite una estrella porque están muy caras, pero la calidad esta buena.

The media could not be loaded. This project box is credible, however, it has standoffs in the bottom, two of which have threaded female brass inserts to accept machine screws. These are intended for use with a mounting plate so project builders can build components onto the plate outside of the box in the open and then simply screw the base down inside the box when they are done. If the vendor is not going to include the plate, they should at least offer it separately. In my case, I work with plastics and easily made a mounting plate of my own. I made all the cut outs in the box using a rotary cutter (rotozip) and found the ABS body to be much tougher than I expected. Zero issues with cracking despite some of the big holes I put in the box. Everything you see in the photo and video was purchased on Amazon including the ASPL lights, the Talentcell rechargeable battery, the power distribution and accessory unit, even the cable glands. All excellent Amazon products leading to an outstanding outcome. My Rize bicycle has never been the same. When cars approach my bike at night from the rear on lonely country roads they slow right down because they don't even realize it is an electric bicycle. The ASPL (Amazon) strobe emergency lights are so bright they even flash off the trees on both sides of the road.

Lo usé para conexiones de acuario

Excelente contenedor para proyectos electrónicos, mis ensambles electrónicos tienen un aspecto profesional

Stainless screws in brass bushes, sealing strip easy to fit after carefully trimming to length. Robust plastic, suitable for use outdoors. Quite tricky to cut as it melts very easily; don't use an electric saw. Must be drilled slowly, too. Mine houses electronics on a motor-boat.