Compatible with BMW 5‘F10/F11 Door Handle 7PCS Kit (2010-2016) | Carbon Fiber Pattern Driver Window Switch Panel +Passenger Door Pull Handles+Window Switch Covers for 520 523 525 528 530 535

I tried other brands, but this one is closest fit to OEM. And the trim on this kit is aluminum, like OEM. Other kits are chrome. Once you remove the door panel, on the back of the panel, you need to remove two T30 torx bolts and two T20 torx bolts to loosen the handle. Note the handle is connected to the window switch housing. So, again on back of the panel, on each side of the switch housing you need to press in a tab while simultaneously pushing the switch housing out. Once this is done, the handle and switch can be easily removed from the door panel. Next you'll need to use a 1.5-1.8mm flat head to pry four locking tabs to separate the window switch housing (to be replaced by this kit) from the window switch. If you have other similar small bits insert one into each tab for easier removal. The kit switch housing then snaps onto the window switch. On the replacement pull handle, on the narrow end of the trim, you'll see a long thin tab (0.5"long x 0.3" wide) with a edged locking feature. On your OEM pull handle, find the slot where this locking feature connects. With a 2.5mm flat head, press down on the tab in the slot, while simultaneously using a nylon pry tool in one of the gaps on the outer edge of the pull handle to separate. continue down the seam between the door pull and plastic trim popping off each locking tab. Assemble in reverse order, but NOTE, even with a clamp I could not get the locking feature to engage. I did clamp and try to pry the locking feature to engage, but it was barely engaged at best. Nonetheless it doesn't really impact form, fit, or function of the pull handle. The material is smooth and clean, compared to the sticky oem pieces. On the front driver door panel. it is critical to ensure the threaded cylinders of the door pull provided by this kit are aligned to the holes on the back of the door panel. If not, when you install the screw it will not engage and instead will push the plastic door pull away from the panel and distort the assembly. Symptoms of this can be the window lock button will get stuck when pressed OR there could be gap between the leather and the plastic door pull part. As a bmw enthusiast, I recommend this kit and it can be installed successfuly and cleanly with great results over the sticky oem parts on your car now. GL

I can’t say enough about how much this improved the look of my interior and the enjoyment I have of my BMW. The fit is spot on and looks factory original. Lots of good YouTube videos out there of how to remove the door cards to do the job. This upgrade will absolutely increase the value of your car when you go to sell it. I’m really happy with the look, feel, and quality of Jaronx products, but especially of these.

Perfect fit no more sticky residue on hands recommend this to anyone with a f10 pretty easy installation just need to remove your door panels and remove 4 screws on each panel

Fit prefect like the original no more sticky black door handles

Fit and color are both spot on. You cannot beat these especially for the price. Goodbye sticky handles!!!

Fits perfectly feels amazing and the quality is definitely there. Easy to install

Looks amazing, gotta put in the work though not an easy install

Handle is all plastic, inside OEM has rubber but good quality.

Quality is very nice

good

I ordered black after one week I received it carbon fiber

The products are not a 100% fit , the Master Switch power window button gets jammed with the new trim and the other door handles are having massive gaps, this would just be a temporary thing just to get rid of the sticky situation, I don’t recommend buying it again from this particular brand

Quedó bien y ajuste y color bien