Dog House Furnace Deluxe 400w with Cord Protector and Igloo Bracket Kit

I bought this hound heater about 3 years ago and it is still working great. At first my dog (he is a Scooby Doo personality) was a bit hesitant to get inside his igloo dog house because of the noise it made (it is not loud) but by about 2 days he was inside and staying warm. Good quality product!

Have 2 dogs that are inside most of the time, but outside in a dog lot during the days. It has a roof and they have stayed dry in it, but the DogLoo was cold. This makes the inside temp about 60 deg F inside. My little rat terrier LOVES it. Installation was a bit difficult, and even though they are not recommended I had to use screws to mount it. For it's location in the corner the screws are no issue.

Good product, installed easily (once I got the correct screws), heats nicely. I would have given this product 5 stars but the screws provided with it are 1) insufficient, 2) wrong-sized (like #6 screws provided by the manufacturer compared to the 1/4" screws which I bought to attach the heater to the mounting bracket; th ones provided did not fit and were too small to 'do the job'. Also, since I was buying replacement screws all around, I went ahead and bought stainless steel to replace the zinc-coated ones. It is a great heater, the best really. (Go Akoma!) Now if I can only get my dog to SLEEP in there...now THAT would be perfect ;)

I installed this in an extra large dogloo dog house (second largest dogloo... German Shepherd sized.) It has been running for weeks now and it works great. Some of the poor reviews are from people who used this without installing a dog house door. That's all I'm going to say about that. lol Installation requires a little thought and a special bracket when using this on igloo shaped houses... locating how high to mount it to leave it fairly plumb on the curved inside surface of the house took some time, but its not rocket science. The hole you must drill to bring the cord out of the back of the house has to be as large as the plug end, leaving a rather large opening for water and air to get in, but I picked up a rubber plug the size of that hole... drilled a hole in the center of that the size of the cord... then split that plug half way to insert the cord. That all plugged into the back of the dog house and came out water and air tight...and it looks very professional. I'll include a photo of that. The stainless steel spring that protects the cord is helpful, but if using this around puppies that chew, be careful with that. I tied the house to the fence behind it with a bungee, then sliced open a piece of plastic pipe to protect the cord that was still inside the kennel, and wrapped that with electrical tape to hold it on. (Note: No cord is exposed inside the house. That last addition was only for the cord outside.) I could have easily installed a heat lamp through the top of the dogloo, but my 40 years of having German Shepherds told me not to. I've seen what can happen when one of those lights breaks... making that water proof would be difficult... and a heat lamp that close to the dog would get too hot IMO. I only wish it were a little less expensive because I'm going to order another one for another dog house.

My dog loves her Hound Heater,she is older and cold weather makes her stiff. I still bring her in when it is extremely cold.The Hound Heater was easy to install in my Igloo dog house with the igloo bracket. The hound heater is worth every penny for my fur baby.

The heater works great and dog love it. I will say that when you install this for your dogs/pets, make sure your dog house is sealed or else you will definitely increase your electric bill. It is also helpful to have this hooked up to a switch or wireless remote to make sure it is off when you don't need it.

I don’t know if all the other people leaving reviews got the same heater I did. - It’s really small - It BARELY puts out any heat - Definitely NOT for outside use (Dog house with closed door or not) - The heating unit itself gets VERY Hot - The “Thermostat” consists of Low-Med-High. No temperature control. Returning it.

I just installed so I will update after use. The igloo house brace that came with this was a joke. It evidently was for only the older models. I had to drill new holes and only two existing holes lined up. I am 57 years old and have assembled many an item. The combined instructions for this were useless. We will see how it heats.

Really impressed with this heater , I set it high and back in the igloo doorway and it works very well, the temperature is variable as well, for -40 weather . It has good power fan and puts out good warm air. Only change I would make , is a remote so a person can change the temperature and actually set the heater into the dome area of the igloo so your not having to take things apart in -40 weather. Thank you