EG STARTS 12x 24mm OEM Arcade Push Buttons Switch Perfect Replace for Sanwa OBSF-24 OBSC-24 OBSN-24 Push Button DIY Fighting Stick PC Joystick Game Part (Each Color of 2 Pieces)

I bought a discontinued Bestop Flexatop from a fellow Jeep owner and connected an LED light bar inside so that I can see inside during the night. However, I was afraid of running the battery down if left on, so I knew that I needed a timer relay switch of some kind. I figured that I would also need an exterior button due to the light switch being integrated inside the LED light bar. I decided to go arcade style in button, myself being a kid of the 80s. After this past Christmas parade, I also decided to get an Adafruit mini soundboard so that I could run sound effects with the push of a button. My Jeep Wrangler did not come with automatic windows, so I had the little pocket there. I am glad that I bought the 24mm instead of the 30mm due to limited space. Using a 15/16" spade bit on some kydex, I was able to fit four of those buttons into the opening of the pocket with the Adafruit mini soundboard inside. The photo above shows my son playing with the sounds. While watching the video from Timer's Shop concerning the timer relay, it called for programming the timer by shorting the white and green wires to ground, or using micro switches. A blue wire triggers the timer. As the process of shorting DC wires to ground was many times, and my fingers too big to use micro triggers, I used the remaining blue, white, and green 24mm buttons to connect to the matching colored wires. So the buttons worked on both mini sound board and operating my LED light bar with timer relay.

Clicky buttons feel great

These are some clicky suckers. I popped a white one in to liven my arcade stick up a bit

I purchased these particular arcade buttons to use for parts to repair other buttons of a different style. The internal micro switches in these arcade buttons are made by Baolian and will fit other Baolian switches.

It was exactly what I wanted. Came in a timely manner and each button came in its own small plastic ziplock inside of a bigger bag. One thing that could be a turn off for people is the click noise the buttons make (no matter how hard or soft you push the button). Its not an issue for me but just something I thought I should point out for anyone interested in a quiet button, this isn't it. Also, not a big thing, but only the black buttons had a piece of plastic on top of the button to reduce smudging. The other buttons had no scratches or smudges though so no worry.

Nice quality and works as expected! Buttons work every time they are pressed as they should. The colors are very nice. Looks better in person than in the pictures!

Worked perfectly

I have 2 arcade sticks (one I built from scratch) that I use for start/select/options buttons. It has more clicky and tactile feedback compared to the Sanwa buttons. For the amount and quality of these buttons, I would have bought them again. I had them for 5 months now and they still do their job

I would buy again.

グググッ、ガチッという感じ 使用頻度が低いボタンに水増し用としてってことならありかもしれないけど 常用するボタンとしてはありえないです

That you can get a full set of 12 buttons for this price is shocking, and they work perfectly for casual use. HOWEVER, I would NOT use these in a custom project or to replace buttons in a fight stick for someone intending to play *competitively* for a few reasons. 1) Far too much travel The buttons have far too deep of a travel to be feasible for use as buttons in, for example, a B0XX style controller for melee, as the force and time needed to fully actuate a button is not reasonable for the type of APM Melee has 2) Far too stiff The springs in these switches are a big contributing factor to point 1. I've disassembled these buttons and cut the springs to attempt to alleviate this issue with mixed results, mostly due to the fact that there's little guiding material to keep the springs aligned which exacerbates my inconsistent cuts on the springs 3) Annoying mechanical key style "snap" The switches have a small metal tab inside that causes a loud snapping noise on every button press, which adds immensely to the noise they already make by being bottomed out. The tab is actually quite easy to remove, but I see it as a nuisance nonetheless and requires effort to remove them. ALL THIS BEING SAID, the important thing here is a sense of context: if you want to use these buttons for a fun little custom controller or a cool diy project, these are a KILLER deal and will serve wonderfully, and I whole heartedly recommend them, hence my 5 stars. Just don't expect to fix up your $200 fightstick with a few of these and get the same quality you'd see out of Sanwa, Crown, or other manufacturers.

こちらの商品、全てのボタンに硬さを感じ押しやすくはないです。 それだけでなく、10分程度触っただけでボタンが上がってこなくなったり、硬い操作感になったりと散々です。 さらに「F1207TTXKEMGSSD」という出品者さんに上記について質問したところ「それが仕様です」と返答され、壊れているレベルなのに返品は受け付けていないそうです。 商品は★0レベルでおススメしないですし、特にこの出品者さんから購入するのだけは避けた方がいいと思います。 1つ当たり120円相当で済ませられると思ったのが間違いでした。 タイトルの通り、250円の三和ボタンなら全く不満がない最高の出来だったので少し後悔。 このボタンは本当にボタンであれば何でも良いレベルでコストの低さだけを求める人向けです。

The buttons feel great. They require almost no force to be pressed on and also seem to be more consistent with each other. I ordered 2 packs of 12 and they all feel and click the same which in my opinion is a good thing.