ANDYCINE LUNCHBOX Magnalium SSD Case for Atomos

These drive adapters are a great idea and allow you to repurpose cheaper drives such as the T5 or 860 EVO to be able to record at maxed out settings on the Ninja. However, since both the Samsung T5 and 860 EVO are both older drives and are becoming increasingly more difficult to source these days it's going to make the usefulness of this product less and less so.I found disassembling the donor T5 drive and re-assembling into the AndyCIne case easy, with around 10-15 minutes of low effort. One stumbling block was that the thermal pads supplied with the case were oversized and needed to be cut to better seat on the SSD memory chips and casing. I would also suggest placing a sheet of the thermal pad between the SSD and the AndyCine PCB sled which it mounts to, this was how the I found the T5 drive when I took it apart and will help for better heat dissipation, extending the drives life long term.Great product, great idea, recommended for any Ninja V owner.

But be careful to test what your drives are capable of before trusting them in the Ninja V. And do some serious tests because even if the drives tops out at the speed you need, any dips below will lead to dropped frames and ruined footage. My T5 drives work fine. But an integral drive I bought as a back up doesn't work reliably at the higher end of ProRes HQ (see the screenshot). Based on the Black Magic software, I'd almost assume that the top end is aspirational, the one bellow is iffy, and two below is safe.

I was using the standard plastic cady and full size ssd with my Ninja V and was OK with that but needed a second drive and therefore another plastic cady, but they come in a pack of 5 for £25 and that price for so little irked me a bit. Then I spotted the Andycine metal cady for not much more - I liked the look of it and although the T5 SSD, which you need to purchase to obtain a drive which will fit, is more expensive than other options, I thought I'd give one a go.Dismantling the T5 drive is easy enough and the swap into the new housing was straight forward, only took about 5-10 mins. I like that I don't have the HD sticking out the side of the Atomos and it sits there on the back more securely than the overside original plastic caddy. It's a nice thing. Good job Andycine.

Love this i purchased this and a Samsung T5 SSD to use with my ATOMOS NINJA V. It was easy to pull the things apart and construct a brand new little SSD that plugs into the NINJA without a problem. There are a few YouTube videos online which will show you how to do it, it was easy however do not attempt this if you are unsure of playing around with the electrics.

The media could not be loaded.  Perfect, with my Atomos ninja V looks incredible, And with my filming kit, it's just a joy

What's not to like about this SSD SATA cartridge? It looks cool, feels extremely sturdy, comes with everything you need to assemble (except the SSD internals), and it does exactly what I need it to do!It took about 20 minutes to put it all together, including disassembling my old Samsung T5 SSD, and transferring it over to the Lunchbox. The Lunchbox comes with all the necessary screws and insulation needed to ensure proper assembly. Like all the other reviewers and youtubers mention, taking apart your SSD is at your own risk, but in my case this is a very viable solution than having to pay 3x-4x the amount for the other variant.Note: you will need a computer/eyeglass screwdriver tool set, and either an exacto knife or scissors to cut the insulation to the appropriate size.

Satisfecho hasta ahora con esta compra, llegó rápido y en perfecto estado. Obtuve un disco Samsung T5 de 1TB, seguí las instrucciones disponibles en YouTube y sin mucho problema pude configurar este disco en la carcasa AndyCine para Atomos Ninja V. Tengo también el AtomX de 1TB y otro disco en caddy plástico de Atomos. Esta alternativa se siente de muy buena calidad, luce profesional y hasta ahora ha funcionado sin problema. Algo que me parece incluso mejor que el Atom X es que esta carcasa AndyCine es más corta y deja expuestas las ranuras de ventilación en la parte trasera del Ninja V, equipo que de por sí es propenso a calentarse, por lo que esto parece ventajoso para una mejor ventilación. Recomendable.

The media could not be loaded.  Comment faire : voilà le vidéo

Helaas is de set incompleet geleverd.

Facile da assemblare è molto comodo e permette di risparmiare parecchi soldi rispetto ai dischi originali Atomos o Angelbird. ho provato ad acquistare un disco m-sata da 1 Tb di una marca qualsiasi (evitando il caro e poco trovabile samsung T5) e , almeno per adesso funziona bene, provato su sony fx3. Mi riservo di aggiornare la recensione qualora questo ssd non fosse compatibile o se si interrompesse la registrazione dopo tot ore) Dopo un pò di prove ho trovato un ssd perfettamente compatibile che ha registrato per 3 ore consecutive senza bloccarsi ed è il kingston SKC600MS da 1 TB.