Dual Display Air Suspension Gauge Air Ride Air Pressure Gauge 2Inch 0-220PSI with 2Pcs 1/8NPT Sensors and 16.5ft Sensor Cable LCD Blue

I used this to monitor my air pressure in my dual-side air ride system. I like the way it looks and the responsiveness of the gauge is real-time... I can see the numbers move if I jump around in the bed of my truck. I couldn't detect any leaks and the hookup was very easy. It seemed to read just a bit high, but it wasn't enough for me to be concerned about. Simple and effective. Plenty of cable length included.

Works great and looks amazing!

Gauge has been working perfectly for about 3 years now. Shows tank pressure and bag pressure. I run up to 170 psi and gauges works good and very clear to read.

Just installed this gauge to replace the stock one that came with my Firestone air bags (developed a leak). I also have an air tank on my truck as well so now I can monitor both systems in one spot. Everything is plug and play except the positive and ground near the gauge itself. My air bag system didn’t have a good place to screw the sensor into so I used 2 female 5/16” quick connects and a couple of t quick connects to just tap into the air lines. Took less than 10 minutes to install, and about 30 minutes to hide wires. Installed on 2015 Ford F-250. Quality seems to be decent, especially for the price.

Very good product. the quality is well wort the price I installed it on my 18 wheeler to monitor Truck air suspension. as well as trailer air suspension. For the Trailer I have a quarter inch poly line going to the front next to the other air hoses with Shop air style quick connections. Both sensors mounted to the truck frame.

Mine reads about 3 PSI low at 50 PSI, and they are about 0.5 PSI off from each other. Fine for my application. It was easy to install. I do like the look.

So I finally got around to installing my air ride and setup the gauge but doesn't turn on. Of course I pass my replacement time. Hopefully they are as simple as I would think hooks sensors to manifold, plug connectors in red to 12v key on black to ground. Orange wire tho I'm guessing it's dimmer? Not sure but gauge doesn't light up or flicker, nothing. Not sure . But looks like I'm gonna be looking for different brand Guage. Hopefully will work out the box.

Seems accurate enough but the sensor wires are too short for a clean install on a 3/4 ton truck with air bags. Ended up splicing extra wiring in to make it work.

Je veux un autre capteur si possible merci

Haven't installed it yet so potentially could lose more stars but first impression out of the box is it looks good EXCEPT there are no fittings to attach the 1/4" line for which this gauge is made for. ...yes, I know they weren't listed but why not at least include compression fittings for the ends of the senders. ...not that I really like compression fittings but at least it would be a plug and play kit then. ...now I have to get more parts.

I wanted one to show compressor pressure and airbag pressure. Perfect for that, but definitely reads about 5psi higher pressure than what I am actually running. One of the sensors failed after a month of use. It's showing 178psi. The seller doesn't sell the sensor separately, now I'm on my own to find a replacement.