Chemical Guys, Ball Buster Wheel & Rim Speed Polisher Drill Attachment Tool

I used this with a corded drill and it works good. I used it for applying wheel protection sealer on outside of wheels and because my wheel design was conducive to the size and shape of this product, I was able to apply the sealant to all exposed surfaces on face and in between spokes. I was able to push it through the spokes to get some onto dish of inner wheel, therefore this product saved me time and work from needless removal of wheels. Only one use so far but I would suggest to first clean wheels with alternative cheap sponge and using this for wax or sealant only on clean dry wheels, not as part of cleaning task. The sponge cellulose construction looks tightly made, as I noticed the wax sealer didn’t really soak in too much before flinging it out, and the variable speed on the drill was key to keeping things neat and conservative with the expensive sealer. I think this product is one of those items that you should get because it seems to fit with the other technologies presently in use without being overkill or one time and done. I will probably use this every time there is a break in the cold weather over the winter, and a few times the other seasons. There are some wheel designs this will not work on, keep that in mind, because the bottom line is it is a sponge not a polymorph material.

I am going with 5 stars for this one, I didn't expect to get much mileage out of it, based on past experience with foam drill attachments. Like many others out there my rims require this type of polisher to get the job done. This one, unlike other brands, did not explode on the beadlocks in the first few minutes. I might even try polishing with the wheels on and see how it does around lug nuts! Get a couple of them, they work great for both cleaning and polishing the difficult to reach shiny stuff. All that having been said, I don't want to set a false expectation for anyone who might read more into the above than stated. This product is still a foam polisher for wheels and other metal parts, most of which contain sharp or hard edges. While this one is tougher than any others I have used, it WILL come apart at some point, no matter how much care you take. Cheers and happy polishing! (note:don't mix compounds, buy multiple if needed).

Helps get into tight areas of wheels for polishing which is great. The downside is the end pulls apart pretty quickly. I used it on drive wheels on a semi. I will probably buy again as this beats hand polishing big time.

I’ve been using the Chemical Guys ACC400 Ball Buster Wheel and Rim Polisher System for about a year on my truck’s gloss black 22” TIS off-road milled rims, and it’s a solid time-saver for wheel cleaning and polishing. The soft foam cone attaches easily to any power drill, and its long, grooved design reaches deep into spokes, lug nut holes, and inner barrels, blasting away brake dust and grime with minimal effort. Paired with Chemical Guys Diablo Wheel Cleaner or Heavy Metal Polish, it restores a glossy shine to my rims in about half the time it takes by hand, as noted in my previous detailing sessions. The insulation sleeve on the wand makes it easy to guide with precision, and the foam holds up well, showing only minor wear after regular use. At $29.99-$39.99, it’s a worthwhile tool for detailing enthusiasts who want professional results without excessive scrubbing. However, it’s not perfect. The round shank can slip in some drill chucks, as mentioned in a Chemical Guys review, though it grips better after some use. The foam can tear if you hit sharp edges like curb rash, so I’m careful around milled accents, as one user warned it “eats the foam” in those spots. For really stubborn grime, it still needs a good wheel cleaner and some elbow grease, as it’s not a miracle worker on its own, a sentiment echoed in eBay feedback. Cleaning the foam cone after use is also a bit tedious—rinsing and air-drying are a must to avoid cross-contamination, as I’ve learned from experience. It’s great for regular maintenance, but for heavily oxidized wheels or intricate designs, you might need additional tools or a second Ball Buster for separate cleaning and polishing tasks.

Great tool, works great and does a wonderful job on those wheels. Cuts cleaning time and makes it fun to work on wheels. A bit on the expensive side of things but overall worth the money.

So I was pretty skeptical about this product. I love to clean my wheels and tires on all of my vehicles. It was soooo handy to use with the drill! It made it easy to clean, and it was very sturdy. T It didn't feel like it was going to break while using it. I would highly recommend this product.

Just got this in the mail and was so excited that I couldn't even wait until after dinner to try it out. Chucked it onto my cordless drill set it on fastest setting and off I go. I sprayed some wheel cleaner on the wheel and let it sit for a min and use this foam cleaner does it job. Within 10 minutes I was done with all 4 wheels and I have not clean them for almost 2 years. The results was good. In area where there is a lot of contact with the foam. It got clean easily and work very effective. But the corners where it form anything greater than 60 or more degrees, the foam just won't reach. It expand there and gentle brush away the surface dust but leaving behind the stain build up. Using my fingers and running back and forth a few time remove additional grinds, so I know this area isn't really being reach by the foam. All in all, I think this does a very good job and with very little additional work you can clean you entire wheel. As to durability and longevity, after four wheels there is already some tearing on the center, cleaning near the wheel stem where you add air does damage this, if your wheel has a lip, it does damage this. So I imaging using this 4 to 5 times is most I am going to get out of this.

Works well. Seems to be designed & made well. Easy to clean. Would like to see additional sizes for tight spots.

Works really well. Tough and no sign of ripping Really saves time

Buen producto para detallado en daño superficial de rines. Cumple.

This saves a ton of work. Held up well used it for 4 hrs straight polishing wheels and tanks on my Semi Truck. Watch for tight sharp areas because it will catch and tear if your not paying attention. I will buy another in the future. ******went to purchase another one of these because it worked so well but now its almost double the price within a year!! WTH!!! Back to elbow grease I guess cause I am not going to pay that much!!

Good for occasional use.. mine lasted about 4 car cleans and then the foam just shredded off. Save your money, just buy a regular drill brush.

Worked great got my rims looking new.