MKA-23 Composite Quick Release Bracket

First off I rated the install 4 stars because depending on your boat it can be very difficult and require some modification to your boat. I have a Tracker Pro 170 and where this had to mount was virtually impossible with the size hole tracker made to mount anything on the bow. So I had to make the hole bigger without hurting the integrity of the boat. Anyway as for the mount, it is really sturdy and definitely makes it so nice to remove the motor when storing the boat and putting the cover on. The directions were very clear and easy to understand. I used shorter bolts for the pad that mounts to the boat because of the difficulty of trying to reach the forward most bolt, I didn't have the time or patience to be ratcheting for 15 minutes. DO NOT USE AN IMPACT DRIVER!!! I state this because I am really good with tools, however when using this tool to speed up your process, it overheats the ny-lock nut to a point that it won't go on or come off. I had to purposely break the bolt. Thankfully I had spares from my new trolling motor install package. As many have reviewed I too had to drill the holes a little for the u-handle to pass completely through. Maybe a suggestion would be to have them slightly larger to begin with since tightening the pad to the bow throws it of just a tad. So far great product, took the boat out recently and no issues. Time will tell on durability. I live in Az. so the heat is always a killer to everything. Hope you like it as much as I do.

If you’re seeking a reliable and efficient way to mount and dismount your electric-steer, bow-mount trolling motor, the Minn Kota MKA-16-03 Quick Release Bracket is an excellent choice. Build Quality & Design: Crafted from solid, anodized aluminum, this bracket is built to withstand the rigors of both freshwater and saltwater environments. The extruded aluminum design with a side screw ensures a quiet and secure locking system, minimizing any unwanted movement or noise during operation. Ease of Use: Installation is straightforward, thanks to the included mounting hardware. The bracket allows for quick and easy removal and reattachment of your trolling motor, making it ideal for anglers who need to transport or store their motors frequently. The side-screw design attaches the motor to the top bracket, which then slides into the deck-mounted bottom bracket, securing with a tightening screw. Compatibility: This bracket is compatible with a range of Minn Kota models, including Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon, and Deckhand 40. Security: For added peace of mind, the bracket can be secured with a padlock (not included), deterring theft and ensuring your motor stays where you want it. Final Thoughts: The Minn Kota MKA-16-03 Quick Release Bracket offers a blend of durability, convenience, and security, making it a valuable addition to any angler’s setup. Whether you’re a weekend warrior or a seasoned pro, this bracket simplifies the process of managing your trolling motor, allowing you to focus more on fishing and less on equipment hassles.

Works great and it saves the cover. I really like being able to put it in the boat when it’s parked so it can’t get bumped or damaged. I don’t spoil myself too much, but this is one that makes me smile every time I use it.

Nice mount I needed to raise the motor up sum to clear the top front bow plate, and removal for storage is a big help.

I have to start off by saying this bracket is amazing. I put this on a 45lb thrust 48" shaft powerdrive V2 and mounted it on the bow of my pontoon. It is extremely solid and doesn't let the motor wiggle at all. For me, It was well worth it for the extra 15-20 bucks over the MKA-16. I use my pontoon as much or more for pleasure as I do fishing so having as small a footprint as possible was important. The "puc" piece that is left behind is only 4"x6" and is very low profile so it won't interfere with any foot traffic. It is also very smooth and rounded edges so won't hurt peoples feet. Mounting: If you read enough reviews about this mount you will notice that some people have problems with mounting on carpet. This mount has very small tolerances and needs to mount together VERY flush to work properly. I mounted on carpet and did not have any troubles. Actually, my mount was on carpet AND also went over the aluminum lip on the edge of my pontoon's bow. This caused the mount to be angled up ever so slightly. The key to this? Get yourself a dozen zinc flat washers and a dozen rubber washer. Mine were 5/16" inside diameter, the bolts are 1/4". Use the zinc washers to get you close to the height you need and top off with a few rubber washers to both dampen vibrations and give you the tiniest bit of wiggle room. I didn't use all of the washers, probably 6-8 of each so a dozen my be too many. Your mileage may vary. Cons: Yes, the locking pin handle is plastic with a big 'ole hole in the middle. If you grab the middle of this handle and use it to insert/remove these pins repeatedly, IT WILL BREAK. This is well documented in many reviews. Grab the end near each pin and pull that way. I have read other reviews where people have attached small rope or string to assist them....very smart. This is the only reason I removed a star for review. How simple would it be for minn kota to fab a solid steel piece or maybe use individual pins with locking cables. I can literally think of 20 different ways this could have been done better. Overall, excellent product with one very minor flaw.

Heavy Duty and well made. It also has an opening for installing a padlock. The reason for the title is that if you ever have to remove the motor for service or warranty support it would be a pain to uninstall by removing the bolts that go through the deck. Possible but a real PIA because the access is or maybe tight as in my case. It would also make removal for winter storage inside if your boat will be outside in cold temps. I was going to knock off a couple of stars because the mounting hardware shipped with unit is not stainless. They are bright coated and will eventually rust. What’s up with that Minn Kota? The motor shipped with stainless steel hardware. Get some stainless steel bolts for the installation.

The MK21 is a great product, it allows me to remove my Terrova and store it safely out of the weather and away from possible theft while my boat is not in use. The only drawback is the somewhat flimsy locking handle. I haven’t had it break yet, but I carry a spare just in case. I also replaced the useless cotter pin with a stainless steel quick pin attached to the motor base with a lanyard. But overall it’s so good that I purchased a second bracket and adapted it to store the motor so it hangs on the wall in the garage when not in use. It’s neat, clean, and keeps the motor from having to stand in a corner or laying on the floor. I had to make some adjustments during the initial installation to accommodate the available space on my front deck, but other than that it’s a really nice product that pays for itself in no time.

Straightforward installation. Feels like it’s made of substantial material. Removal is as simple as it gets.

Works perfect with power drive

As advertised. Shipping was quick. Installation was very easy. I needed a quick disconnect for my 80lbs Thrust Terrova and this worked great. One bar to pull out and the motor is off.

Good

Great product & fast shipping

Parfait