BrosTrend Dual Band 1200Mbps WiFi Bridge, Convert Your Wired Device to Wireless Network, Works with Any Ethernet-Enabled Devices, WiFi to Ethernet Adapter with Standard RJ45 LAN Port, Easy Setup

The CAT5 cable from my ISP's router to my desk somehow failed after installation of new router. The WiFi-Ethernet bridge was easy to install and connect to ISP's Wifi, and works very well. The only downside is that all devices downstream from the bridge no longer appear as connected devices of the router. The address reservations and port forwarding settings for my devices in the router appear to be working, but changing them could be a challenge. May have to run temporarily a CAT5 cable from my office to the router, make the changes, then go back to WiFi.

Very nice device. Simple to set up. Have used three units for remote printing at different distant locations. Works nicely.

This is a solid and cheap little WiFi extender and 'ethernet to WiFi' adapter. Both WPS and WiFi GUI setup make this simple to get going. However, I looked at this as a way to boost the speed of my Xbox Series X WiFi, as the built-in adapter doesn't support gigabit WiFi. There is no way to disable the 'bridge' mode on this device, so it always acts as an extender even if you only need an ethernet to WiFi adapter. This slows the bandwidth significantly to about 100mbps in my testing. My Xbox on its own can get 200mbps with the built-in WiFi. Just a note for people who may be trying to use this device for the same purpose. I have nothing bad to say about it and will keep the device on hand for other projects. Older devices that only have ethernet will almost all benefit from a 100mbps connection to the internet.

the wifi bridge works flawlessly and setup ib a breeze. would have given 5 stars but i can only get 100/100 (Mbps). My PC has a Realtek Gaming 2.5GbE so i wish i could get at least 1Gb.

For anyone needing to get ethernet connectivity to a location where WiFi is the only option, this bridge handles it. Reliable, decent speeds, stable connection. Networking gear should solve problems without creating new ones and this does exactly that. A specific tool for a specific need that works well.

I purchased this wifi bridge so that I could connect my laser machine to the wifi network. It works great so far. It connects to my router quickly and the speed is good enough for the laser machine. This bridge does broadcast an SSID and because of this, I unplug it when I am not using it. Overall, it works as intended.

The device stopped working in the first hour of use. It was configured correctly and working great, but suddenly stopped working and can no longer be connected to. The power LED remains off while plugged in. The power LED is supposed to remain on while the device is plugged in, so this is definitely a problem with the adapter. It cannot be reset, cannot be reconfigured, and unplugging/replugging does nothing. I hope they reach out to me to replace it, but I will leave this review online until they do. Right now, this device is an expensive paperweight.

This product is amazing! It took only 5 minutes to set up and works flawlessly with my internal network. I have legacy instrumentation running on XP operating systems, which don’t recognize USB Wi-Fi adapters but work fine with Ethernet cables. To avoid running cables from my server to these XP computers, I decided to try the BrosTrend device—and it exceeded my expectations. After setting it up with my internal wireless network, I simply plugged it into an XP computer using an Ethernet cable, and it connected automatically. I chose the 2.4 GHz band instead of 5 GHz since I wasn’t sure if XP would recognize the latter. The 2.4 GHz connection works perfectly, providing fast and reliable data transfer for files and images from my instrumentation. This product is a game-changer for my setup, and I’ll definitely be purchasing more for my other legacy instruments. Highly recommended!

I have a Bluesound audio set up which is more stable with a wired internet connection but that was hard to achieve. I bought this device to provide a wired connection and it works perfectly. Set up couldn’t be easier. I plugged it in near my router, paired it with the press of two buttons, moved it to where it was needed and it connected straight away. Perfect!

Este repetidor de señal es una excelente opción para aparatos algo antiguos pero caros como un plotter o una impresora grande que solo tienen el conector USB tipo B y el Ethernet. o también para aquellos que solo pueden conectarse en la banda 2.4. Sincronizas el adaptador a tu wifi con la banda 5.0, lo echufas cerca del disposivo, le pones su cable ethernet y veras la diferencia.

This WiFi to Ethernet adapter works exactly as expected. Setup was quick and easy — just plug and play. It provides a stable and fast connection for devices without built-in WiFi. Great for smart TVs, gaming consoles, or PCs. Compact, efficient, and a solid solution for extending wireless connectivity. Highly recommended!

I purchased this to connect a LAN only device to our network which was located in an area that would have been very difficult to run a network cable to, but there was a strong wifi signal in the area. This device not only extends a wireless network to LAN, but also extends or boosts your wireless signal. I did not need to extend the wirless signal so I turned that part off. It worked seamlessly to bridge the wireless network to LAN for my device that was LAN only. There is a web browser interface that you can access as soon as you plug a laptop into the LAN port. If you've configured a home router before, than this will be strait forward for you to set up.

Bought this so I didn’t have to run a Ethernet cable across my room to my CCTV dvr from my router… I just plugged this into a socked beside my dvr and connect a small Ethernet from dvr to this. Job done !! Excellent signal, easy to connect to WiFi via wps button.