4PRO WC433-21 Generator Wireless Remote Control Set

Description

This set is designed to wirelessly control any electric start generator having a remote start input or being specially adapted for this purpose. It includes a 2-button transmitter and a receiver with relayed normally open (NO) and normally closed (NC) contact groups. The set could remotely start and stop a generator on 10-100 meter distance depending on possible obstacles between transmitter and receiver directly connected to generator. 4PRO WT433-02 GENERATOR WIRELESS REMOTE CONTROL TRANSMITTER TECHNICAL SPECIFICATIONS: • Current consumption in active state: ≤12mA • Working frequency: 433.92 MHZ • Modulation: AM • Transmit distance: 10-100m • Dimensions: 61×30×12mm 4PRO WR433-01 GENERATOR WIRELESS REMOTE CONTROL RECEIVER TECHNICAL SPECIFICATIONS: • Voltage: 12V DC or 24V DC depending on configuration settings • Working temperature: -30℃-+70℃ • Frequency: 433MHz • Memory capacity: 30 learning/fixed code transmitters • Standby current consumption: ≤9mA • Relay current output rating: up to 5A • Dimensions: 62×43.5×30mm RECEIVER CONFIGURATION SETTINGS To change the configuration jumper settings, please remove a receiver plastic case by loosening two screws from the device bottom side. 3S-Jumper (if closed): to activate the relay for 3 seconds only; L-Jumper (if closed): to activate/deactivate the relay by the ON button only with both state fixed; M-Jumper (if closed): to activate the relay by the ON button and deactivate by the OFF button; If all above-mentioned jumpers are opened: to activate/deactivate the relay by the ON button only without fixed state; 12V/24V-Jumper: 12V DC (if closed) or 24V DC (opened). Note: M-Jumper must be closed for the most of the generator controllers. More on controllers4generators.com