Keter Premier Tall 4.6x5.6 ft Resin Outdoor Storage Shed, Backyard Garden Shed with Shelving Brackets for Tools, Patio Furniture, Pool & Bike Storage, Grey & Black, 62 cu. ft Capacity

The best I have ever bought and I have bought a few in my time (Senior Citizen), good quality, easy assembly and it is 100% weatherproof ! Shelves cannot be overloaded - tend to bend a bit - however, that's an operator error and not the manufacturers'. Definitely 5 star.

The product itself is very good. It was relatively easy to put together as the diagrams were easy to follow. However we are struggling to find shelves to fit the product. Therefore if you wish to utilise the use of the brackets for shelving you will be very disappointed.

Sturdy cupboard, easy to put together.

It alright until something breaks, you can't buy spare parts and Keter don't want to know. Definitely not worth the money.

This is a good sized storage shed but if the plastic hinges break as mine did in a storm Keter can’t provide spares so you either have to right off (not good for environmental impact) or try and repair with fiberglass and resin. Will think twice about buying from this manufacturer again.

Cheap and full of gaps. Won't be waterproof as advertised. Plastic crap !

Great Product Very happy with Quality and Easy assembly , plenty of room for stuff at my RV

Buen producto

These sheds are pretty nice. They are very Sturdy once put together & a pretty easy two person assembly. We ordered two. Hubby & I put the first one together and found we were missing a bunch of pieces which was annoying and made the process a bit longer than needed. We were able to get it together without the pieces and the seller quickly sent out the needed stuff so all was well. Hubby put the second one together all by himself - kind of a pain with the larger sides needing some support but he got it done. Second one was not missing anything. Once together they are very very sturdy and have a ton of space inside. There are two shelves that run the full length and about 2/3 the width. They stable and holds a lot of weight - they also have a little lip on the forward edge to keep stuff from rolling off - very handy feature. The base is sturdy but there is some flex you will feel if you are standing inside - Hubby is a perfectionist so he cut a couple pieces of 2"x4" and plywood to make a base to put under the base. He also did this to tilt the sheds back about 5degrees so that rain would run off the back of the shed instead of pooling or coming down the front and possibly getting inside the doors. Not a necessary thing but he is who he is. The handle locks the doors together and has a space for a long shank padlock. Even tho it is primarily plastic it is very sturdy and I love that it has really helped to clean up our covered driveway. We use them to store all our girl's softball and sports stuff and our ski/snowboard gear.

FACIL DE ARMAR,

After researching and looking at various out door shed designs I decided to get this Keter shed. Although the instructions recommends two people at various points during the assembly process - it only took just myself about 1 1/2 hours to put this shed together properly from ‘start to finish’. Having said that - here is MY recommendations for having a “stress free” experience in doing this: 1- ENSURE you have a properly prepared ‘base’ to set this shed on. You’ll want to have a FLAT - LEVEL & STABLE ‘base’ that will make FULL contact with shed’s plastic base! (Do NOT set the shed on ‘posts’ or any method that does NOT provide a LEVELED and solid base!) Again: I can’t stress this point more if you expect this shed to perform correctly and remain stable, square and long lasting! 2- REVIEW the directions CAREFULLY - DO NOT ‘skip ahead’ on any of the numbered ‘steps’. 3- Most, but not ALL pieces are carefully labeled and ‘match’ what you see in the assembly directions. HOWEVER: the ‘pictures’ and diagrams on the instructions can be ‘matched’ to any non-labeled pieces by carefully matching by ‘looks’. Take extra time to MAKE SURE you have PROPERLY ‘oriented’ any pieces BEFORE screwing them together! 4- IF you use a impact drill to put in the screws: use the LOWEST torque setting so you don’t ‘overdrive’ and strip the screw insertion points. The shed is PLASTIC - so don’t overtighten the screws! Again: make SURE you don’t overtighten the screws for this shed! 5- There are three different screw sizes used on this shed - make SURE you use the proper ‘sizes’ where indicated on the instructions. 6- This shed comes with (12) small right angled ‘clips’ for installing two shelves. You will need to provide the ‘shelf material’ that you can get at any big box hardware store. The instructions recommend a 12” deep shelf - but you can go deeper if needed (16” to 18”). The width of the shelf needs to be at least 51” in order to ensure you have full ‘side to side’ contact - cut the shelf width accordingly. 7- The finished ‘roof’ slants slightly enough to the back of the shed to permit ‘rain run-off’ (another reason to ensure you have properly LEVELED base that the shed is placed on!) 8- The instructions say that you ‘can’ paint the walls of this shed. But - the plastic color is pleasant enough as it is - and I wouldn’t paint it and have to maintain the paint finish! 9- There are two metal door hinges that you should ‘oil’ or spray some lubrication on the pivot points of the hinges. 10- Step back after finishing up and ENJOY YOUR NEW KETER SHED!