Rain-X 810198 Repellency Water Repellent Wiper Blades, 24" & 21" Windshield Wipers, All Weather Streak-Free for Enhanced Visibility w/ Water Repellency Formula

These wiper blades install easily and fit all types of wiper arms (large J-hook, small j-hook, and pin arms). The adapters are handy to attach the blades. The hardest part I found was getting the adapters to snap into place without too much force. It takes a lot of pressing and pulling to make it snap into place, but it can be done. The clip on the front of the adapters can then be snapped into place. Once attached they stay securely in place. These are a good value as you get 2 blades, instead of one. I would recommend them to those who want a quality product to replace worn blades.

My wipers broke off due to ice yesterday and the new ones arrived today. They were easy to install based on the official instruction videos. Several of the user videos have flaws (removing the protective cover prior to installation, failure to click it in fully, and failing to run the wipers after installation ) so please take your time and read the directions. I would suggest cleaning your windshield prior to installation so the rain-x hits the window not a layer of dirt. I also use rain-x wiper fluid as a further edge to keep windows clean. Price was comparable to other wipers. I recommend these wipers and the Amazon feature that allows you specify the car year, make, and model as it guarantees a perfect fit.

Installation was a tiny bit confusing since these fit so many types of wiper attachments but I got it figured out within about 10 minutes haha They work great, keep the windshield nice and clear in the rain.

Works very well, leaves the film for the water to bead off which is what I love about it! Still leaves it a little streaky when I us the washer fluid but I don’t know if it’s just the ones I got or not. Still love them because they work!!

I picked up these wipers mainly because my old wipers were streaking badly, and I’m honestly really impressed with how well these work. The installation was super straightforward. The instructions were clear and easy to follow, which I really appreciated because I’m not exactly a “car person.” It only took a few minutes to swap out the old blades, and everything clicked into place without any hassle. Performance-wise, they’ve been great. They wipe smoothly and evenly with no streaking or annoying squeaking. The water-repellent feature actually seems to help too — rain tends to bead up and roll off the windshield more easily, which makes driving in bad weather feel a lot safer. Overall, these feel like a solid upgrade from the generic wipers I had before. If you want wiper blades that are easy to install and actually do a really good job clearing the windshield, these are definitely worth picking up.

Easy to install, fits my 2010 Jeep Wrangler perfectly and has improved the visibility through my front windshield. No longer have streaks. Will always stick with Rain X. Last time I trusted the store employee's recommendation for Bosch wiper and those deteriorated quickly and left streaks on my windshield. No longer with the RainX, clear vision and smooth windshield views. Great value for the money.

Rain-X wipers are the best windscreen wipers I’ve used throughout my life, and are my go-to anytime I need a durable and reliable replacement. Keeps my windscreen clear and visibility as best as possible for wet weather days. My only complaint is the ease of replacement being tricky as you really have to pull the wiper arm into the cradle of the wiper mechanism. Directions make it sound/look like a two-second process but, it took me about 10 mins and several failed attempts before I could get the J- hook properly seated and securely latched.

Ok, this was the BIGGEST pain. I 100% got the right size for my 2020 Honda Accord, 26" for the left, 16" for the right. I am a capable, intelligent, adult woman. I have installed my fair share of windsheild wipers in my 45 years, in the rain, in the dark, at the gas station, in front of the auto parts store, on the side of the road, in the rain, without a flashlight. I purchased these, left and right to replace my set that was very far gone, due to summertime and sap. So, last evening I attempted to install them, ahead of today's rain storm. I followed the directions, not great directions, but I understood them. The tab would NOT click closed. I could NOT have pushed harder without breaking them and my fingers hurt. So, It was clear to me that the J hook need to be seated further inside the housing... So ok. I tried and TRIED to seat the J hook further into the blade housing. There was NO budging. I tried multiple times on BOTH sides. I put enough pressure and force into it that I was afraid I was going to bend or break the metal arm, the part attached to my car. I actually gave up, a first for me. I figured I would revisit the issue in the morning with fresh eyes and fingers. But the rain was coming, and today was an important day, so it HAD to get done. It's just wiper blades, for heavens sake. I didn't doubt that I could do it. BUT, I tried again, and AGAIN. I called my ex for advice. I watched videos. I double checked that I had the right size. Well, I ended up having to borrow a friend's car to take my kid to school. I came back home, I tried AGAIN, nope. I had to cancel on a dear friend who desperately need my support in court. THIS is what I am most upset about. So, I read Amazon reviews looking for insight, I watched YouTube videos, Rain X website videos. I desperately tried EVERYTHING so I could show up for my friend. FINALLY, (but way too late to help my friend) I found a post on reddit from some wonderful man who said if the j hooks don't fit down far enough to snap the closure shut, and no amount of force is pushing it down, you have to remove the black outer casing to expose the three holes on the side and use a small screwdriver to force the J hook far enough in to allow the tab to snap shut. ARE YOU KIDDING ME? So, yeah I got to work. Well, it worked, thank the Lord above. But, by this time it's already 5pm, court is over and its dark, damp and cold... THEN I found out it's a bad idea to run Rain X wipers over dirty glass. Its due to rain in an hour! My kid has school tomorrow and I have to go to work, turns out, windsheild wipers are IMPORTANT. Just saying. So....Great. AND you have to run them at medium speed for 2 to 3 minutes on DRY, CLEAN glass at the moment of installation. Wonderful. I have a pine tree above my driveway that shares lots of its sap with me. So, I wash the windsheild with soap and water, rince, dry, use a razor blade for the drops of sap, wipe away any traces of sap with rubbing alcohol, final rinse, and dry with a microfiber cloth. Ok, I remove the yellow protective case around the blades, lower them, lovingly, onto my sparkling clean and dry windsheild, turn the car on, run the wipers on the dry windsheild at medium speed for 3 minutes, then add the final splash of water. I got back in the car to check out my handiwork, turn the wipers on and WITH EVERY SWIPE OF THE BLADES there is a haze that lasts for a couple seconds. Not a problem, IF you're just swiping away a little water or using low speed. However, if you are using high speed wipers, the temporary haze doesn't go away fast enough before the next swipe. WONDERFUL, because yes, I went through all that so that I could drive around in a rainstorm with a windsheild I CANT SEE OUT OF. I am so very displeased, I never thought that, in my life, I would have such an issue and have so many problems because of WINDSHIELD WIPER BLADES. This is ridiculous, writing this review is ridiculous, and probably a fat waste of my time, but honestly, I'm MAD enough that I don't care. WHAT is the deal with over complicated wiper blades? WHY is there an outer shell, an inner blue piece, and so many different ways to configure it, but no actual way to USE it without finding a person on Reddit to tell you how??? I 100% did everything right. I even had my friend try to put the wipers on, he couldn't do it either. I'll give two stars, instead of one, for this reason: I should have bought new blades before winter and before it was totally necessary. I'm willing to take responsibility for that. I also should have done more research, you know, kinda like a "stupid" tax that I have to pay, if I wasn't busy with kids, and career, and LIFE. I guess I should have found the time to research these blades so that I WOULDN'T have bought them. The dirty windsheild, the sap.. ok thats MY problem. I should have done more research into Rain X. The fact of the matter is, I just wanted wiper blades to wipe the water away. I assumed a name brand set was a good idea, but I didn't put much thought into what Rain X was. My fault. I didn't know that the blades have a coating of Rain X that makes a mess, another "stupid" tax. And that it has to be properly prepped (not that proper preparation did me the slightest bit of good) I dont know... did I miss a step? I just thought it was a brand. My bad. In the past, depending on the circumstances of my wiper needs, I always either just bought Bosch, or a store brand and just put them on the stinking car! Nonsense. Never again. Overly complicated, difficult and very disappointing results, once these blades are either worn out, or prove to be a hazard due to not being able to SEE, I am anticipating having to strip the product off of my windsheild with some chemical. I'll probably find help for that issue on Reddit. I just want to say that once I had finally found someone to tell me how to get enough leverage to forcibly shove the j hook in the wipers far enough to lock them in place, (without damaging my car) and gathered all my tools, it took me 40 minutes, start to finish to install and prep the windsheild with wholly disappointing results. I will reiterate here that I am a very capable woman, installing wiper blades is way below my pay grade. I'm obviously irritated. And NOW, I will be even MORE irritated tomorrow, when I drive to work, in a rainstorm, and can't see out of my windsheild. TOTAL Garbage.