EKWB EK-Loop D5 G3 PWM Pump Motor

Unfortunately after 3 years my g2 pump has failed. In nearly 20 years of water cooling this is only the second pump that has failed on me. These things have even lasted me for multiple computers, 3-5 years 24/7 use. I had a really annoying clicky grind sound that came and went for about a week, then finally, it got REALLY loud, and the pump just flat-out died mid-game. Counter strike FPS went from 250-300 to 30. lol I knew exxatly what it was and powered down., Two days later, the new pump arrived, and I got it installed. The new ones are SATA instead of Molex, which at first was annoying because I didn't have an extra handy, but long term, this was a smart idea. I only had Molex in my system for LED and the pump. These are high-quality pumps with amazing performance. I think you could use them in a small pool.

Of all the products I've ever bought from EKWB, their D5 pumps are the only ones that have never disappointed me. This was my first G3 version, it can rev even slower than the older ones I've used, but throughout the entire RPM range it's even quieter than the older ones were. It definitely moves a lot of water at full speed, and it can handle a decent amount of back pressure too. The only problem I've really ever had with an EKWB D5 is one that stopped sending RPM information... randomly that one will for a short time, and then stop again, but that's literally the only problem I can think of that I've ever had with one. Definitely I was willing to pay the extra $50-60 to get another EKWB vs. a lesser brand, and though I never tried the cheaper one before, I feel like I would have been disappointed if I hadn't paid the EKWB tax. It's pretty much the only EKWB product that hasn't disappointed me for any significant reason.

For those who need the Ek water block this works. This is my second one the last one lasted about 2 years which i feel should have been longer. Pros: Moves the water nicely Cons: Could move it slightly faster, Durability and last con is sometimes this is hard to find. If you need this block its an easy flow to grab just dont get flushed away.

I have both the EKWB EK-Loop D5 G3 PWM and the PrimoChill Enhanced PWM D5. The EKWB is a bare pump only. No mounting hardware whatever is provided, not even an o-ring. What a cheap-out. The PrimoChill at least provides a quality o-ring. The EKWB seems to produces reasonable output maybe a couple of L/H less than the PrimoChill but not sure as I have different pump tops on them both and pump tops matter a lot (Bykski D5 Pump Top Kit Version 2 is good). The EWKB has a faint whine so not as quiet as the PrimoChill. On both, the PWM cable provides the tach-out and PWM-in signals but neither provide the ground signal reference which again is a cheap-out. Ridiculous to reduce cost by removing one whole wire -- especially considering the overall pricing. The EKWB is powered is by a SATA connection that you may like. I do not, I prefer Molex. The EKWB is less expensive than the PrimoChill version but I have both and prefer the quieter PrimoChill pump (better build quality too). I have had many D5 pumps work for over 10 years with never a failure. So a small difference in price is irrelevant in the long run. Get either one (PrimoChill or EKWB), all of the many D5 pump brands I have used have worked out well. The cheaper non-D5 pumps on offer are much noisier, have less output (that matters a lot) and not as durable. Avoid those, they are a waste of money.

like

Upon purchasing this pump as a replacement for its identical predecessor, which had unfortunately malfunctioned causing a disastrous mess in my water loop. I had hoped for EKWB to recognize the gravity of the situation, considering the extensive downtime of my PC resulted in substantial financial setbacks due to halted operations. Reaching out to EKWB, my expectations were centered around prompt support and understanding. Regrettably, the conversation was dominated by debates regarding warranty rather than a solution-oriented approach to customer service. Given my experience, I would encourage prospective buyers to exercise caution when considering EKWB products. Their apparent hesitancy to swiftly address valid product concerns is noteworthy. I am inclined to explore alternative brands for future purchases.

Extremely quiet and no vibration

I have 2 of these pumps in my system and 2 in my wifes. They are so unreliable I have to keep a spare on hand at all times to be sure I can replace them when they fail. With 4 pumps to care for I seem to replace one about every 6 months or less. They flow rate typically starts to drop off, then they start to make noise, then the flow drops to something that cant keep the computer cool any more and I have to replace one of them. Pic of my wifes system for you guys to see. I for sure know what I am doing, I hand built this system my self. As well as mine and probably another 10 of them for other people and past systems. Been in to water cooling for years now. Never had anything bad to say about EK products but the stuff I used in the last 2 builds of mine, ( mine and my wifes current systems) has not held up well. And getting warranty from EK is near imposable. I have throw about 3 of these in the trash now as I could not get EK to even respond to my attempts to warranty them.

Wie gewohnt EKWB Qualität bin immer zufrieden den Produkten. Die Pumpe Läuft einwandfrei bis heute. und ist schon länger her wo ich die Pumpe verbaut habe.

happy with perchase.

Tldr: Funktionieren super, wirken gut verarbeitet, können recht schnell drehen, können aber, wenn man die Settings übertreibt, auch sehr unangenehm "kreischen". Mehr dazu unten ! Details: Wie man am Bild sieht, hab ich mir großkotzig gleich die doppelte Ladung an den Mo-Ra3 gebaut. Funktionell gesehen, kann ich nichts gegen die Pumpen sagen. Sie schieben das "Wasser" bei meinen 16/10 Schläuchen mit gut und gerne 100-200L/Min durch, je nachdem, wie man sie einstellt. Das wären wir aber auch schon beim "Problem". Wenn man die Dinger auf 100% laufen lässt, kreischen die halt um Gnade. Dieses hochfrequente Geräusch ist echt unangenehm und auf dauer nicht empfehlenswert. ALLERDINGS wissen Profis: die lässt man auch nicht auf 100% dauerlaufen. Ich fahre, nach einigem rumgeteste, mittlerweile am besten mit einem Profil von ca70% - 85%, wenn wirklich Hitze und Last anliegen. Damit hat der Kühler gutes Standgas und genug Platz nach oben und trotzdem bleiben die Pumpen recht leise. Fazit Gute Pumpen, die ihre Leistung auf jeden Fall erbringen (laufen jetzt auch schon seid gut 7 Monaten ohne Probleme im System).

Leider kein Befestigung dabei sollte mit in der Beschreibung stehen aber die Pumpe selbst top sehr sehr leise und pump je nach Einstellung g eine Menge