TORQ Foam Blaster 6 Cannon, Garden Hose Attachment for Cars

f you are looking to get thick, clinging suds for your driveway details without dragging out a heavy pressure washer, the Chemical Guys TORQ Foam Blaster 6 is an absolute must-have. I picked this up because I wanted an efficient way to lay down a heavy layer of foam just using a standard garden hose, and it works incredibly well.I regularly detail vehicles at the house—including maintaining my 2023 Toyota Camry SE and getting my son's 2020 Buick Encore CL perfectly dialed in. Gathering photos of flawless paint reflections for my detailing portfolio requires a clean, scratch-free wash process, and this foam gun makes a huge difference. The thick suds safely lift and float abrasive dirt away from the paintwork before I even touch the car with a wash mitt. A few things that stand out:No Pressure Washer Needed: It snaps right onto any standard garden hose, making setup fast, simple, and effortless. Adjustable Foam Dial: The adjustable concentration dial allows you to easily control the soap-to-water dilution ratio to lay down the perfect amount of suds. Reduces Scratches: The generous foam output provides excellent lubrication, minimizing the risk of swirls and surface damage as dirt slides right off. Whether you are doing a quick weekend maintenance wash or meticulously prepping a vehicle's paint to capture portfolio shots, this foam gun delivers fantastic results. Highly recommended for any detailing enthusiast!

This foam blaster works exceptionally well. It lays down a wide, even strip of thick foam—covering approximately five feet across—which does an excellent job of loosening and removing dirt, grime, and bugs. It's also very easy to use. Simply adjust the foam consistency to your preference, connect it to a garden hose, and start spraying. The setup is quick, the coverage is impressive, and the cleaning results are outstanding. I would definitely recommend it to anyone looking for an effective and convenient car washing tool.

The foam blaster did exactly what I thought it would do--it made suds. It made suds in sufficient volume that I thought it was safe to wash the car when combined with the two bucket method. I understand that there are people who think it does not make sufficient suds, but this is not a pressure washer-powered device. It just can't make "shaving cream" style foam. But it also requires a lot less work to get this one going. On the positive side of the ledger, I did not have to bring the pressure washer out, hook it up, plug it in, and then after use, do all of that in reverse and put pump protector in the pressure washer. The steps to use here were to fill with 3 oz. of carwash soap, dilute with hot water, and go. Afterward, everything got rinsed and left to dry. Easy. So let's get to the reason why I am not in love with this thing and not giving it 5 stars. Some of the parts feel a little cheap. The bottle? Not good--how about something more like a Nalgene if this thing is going to get used outside and might take a drop or two rather than something that feels one very small step above a single-use water bottle. The top felt pretty good. The front and business end of this thing was meh but not faith inducing either. I will say that the nozzle at the back felt pretty decent and came with a nice quick disconnect on it. All that said, I hope I never have to find out what parts are available through Chemical Guys but have much better faith that this will not be instant junk if anything breaks over one of the other generic ones available.

Easy setup with a regular garden hose and it foams up nicely. I’ve used it several times with different foaming soaps and it works great every time — no leaks, no issues, no hiccups. Feels like good quality overall. It’s a little pricey but seems like it’ll hold up. Would recommend.

After having it for a few years here a honest review, the first year you’ll be thinking this is the best investment you’ve ever made and thinking that for it being on sale this is fantastic, after the first year reality with hit that the seals on the foam cannon and garden hose connect are cheap and will leak severely causing you and anything around you to get wet, the hold on the connect with rust easily and will get stuck causing water to spray when you want it to stop, and the main issue I had was the quick connect disconnecting it self causing the foam cannon to fall and take damage (in honestly isn’t the end of the world) but once you reconnect the cannon the water/foam container will fall out and cause you to loose all the foam you had inside (made me punt it down the street in anger) it’s not the worst product but it is far from the best I’d say you can get the same quality with stuff from alibaba and save more money, only cool thing about this product was the fact that it’s always on sale (makes you wonder no?)

Straight out of the box, the first Torq Foam Blaster 6 I purchased, leaked between the base of the black foaming wand and the green mixing head, as shown in some of the reviewer’s pictures. If yours does that, return it. I exchanged mine for another, received the replacement within 3 days, and it works perfectly, with absolutely no leaks anywhere. The device is made mostly of plastic, however the brass is actually brass, and not just aluminum sprayed with what appears to be a brass coating. Originally purchased for those quick in between car washes, I find myself reaching for it more often than not because it’s that quick, simple, and effective. I wanted to finally get rid of, so used the last of my Meguiars Gold Class soap, put the dial on 3, and this thing threw a surprising amount of suds with a soap not really designed to foam. I first rinsed, then foamed the entire car. As I washed, I could simply disconnect the container from spray nozzle, rinse vehicle, re-attach container to spray nozzle and cover entire vehicle (water causes water spots, not suds) a second time for the contact wash. It takes mere seconds to go from foaming to rinsing and back to foaming. I do saturate my mitt with suds, rinse and re-saturate said mitt for each panel, as well as re-foam each panel as I contact wash. Again, the design takes only seconds to remove and re-attach. The suds provide the lubricity to help minimize the inevitable micro-marring that comes with a contact wash. After two full passes, wash mitt saturation, and re-foaming each panel, I have just less than half a bottle of mixture left. Amazing! To be clear, this does not produce that thick shaving cream foam you get using a power washer and foam cannon; it produces SUDS. It’s good for loosening the topical contaminants, and after rinsing, the second and subsequent foaming provides lubricity for the contact wash. As for those with pictures of a broken foaming nozzle, and broken nozzle sprayer handle, c’mon man. If you’re applying enough force to break this sturdy plastic, you weren’t watching where you were planting your size 14 foot, or you’re doing it really really wrong. Even though I own a power washer and two very good foam cannons, the simplicity, ease of use, and effectiveness of this little jewel has me reaching for it time and time again. I haven’t had the o-ring blow out on me, but if it does, I’m prepared with a replacement. I can’t speak for the nylon quick connect that comes with the Torq, in that I use a brass quick connect with shutoff valve on hose end, and put a cheap orange big box store, aluminum brass colored male quick connect on spray nozzle, with absolutely no leaks. Caveat: The cheap quick connects wear out quickly. I can easily disconnect whole foam gun assembly, and replace it with your wife’s favorite 7 function spray nozzle. I’m very pleased with my purchase of the Chemical Guys Torq Foam Blaster 6.

This is excellent for applying foamy soap to your vehicle. To be honest, I had doubts about buying this because others had problems leaking at the connections or early failure, but this thing is well made! My only gripe is there isn't any markings so you know how much soap your putting in, but that's minor. Assembly is easly and it works as advertised. This thing really throws out the soap at the 4th setting and makes some THICK foam. I've tried hot water and soap and cold water and soap, makea no difference that I can tell. Just make sure you use a good quality soap ( I prefer Griot ). This thing doesn't break the bank and is perfect when you don't want to or can't break out the pressure washer. Go ahead........buy it! You won't be disappointed. It makes washing your vehicles child's play........and FUN!!!

Got a new car and was told never to do car washes so that led me to some foam guns. I wanted to start with a hose one before I bought a pressure washer one and that led me to the Chemical Guys Foam Blaster. It's a good concept for an entry level foamer. I'm happy with its use so far. Key features: • Install: 5/5 - it's easy to put together and the directions are clear • Ease of use: 5/5 - Once put together, it's really easy to use • Performance: 4/5 - It does foam the car, but the foam itself isn't very thick • Value: 4/5 - I expected a little better performance at its price point. I've only used it once, so I can't speak to its durability yet but will update after a lot of uses. Final take: I think it's a very good entry level foam gun that is functional. If you're looking for top-notched clean, I think you're better off going the pressure washer option.

Easy to use and produces the right amount of form as required.

Great product. Lots of foam. Easy to use. Works great with a garden hose !

Este producto es muy bueno,me da una calidad de espuma buena con presión increíble siendo conectada a una manguera regular,parece que estoy usando una hidrolavadora, dependiendo la cantidad de espuma es el shampo que usas pero yo con una carga usando el 3 me da para 4 lavadas sin problema

Received mine and was pleasantly surprised that it does provide a decent foam from a mains pressure hose.

Good foam but leaks also there was no adapter for the garden hose connection which I had to go out buy.