SKIL SRT1039 Benchtop Portable Router Table for SKIL Routers RT1323-00 & RT1322-00 (Router Not Included)

If you have a skil router and don’t use a router table to make a living this table pretty good for the price. I doubt anyone that uses a router table at work would be looking at this anyways. It’s fairly basic and is mostly made of plastic. It’s sturdy if you bolt it down. It’s a good hobbyist router table. If you don’t already have a skil router this might not be the best option.

Portable Router looks great easy to put together and like the storage areas.

The SKIL SRT1039 Benchtop Portable Router Table offers solid performance for the price. Setup was quick and straightforward, and the built-in on/off switch is a very convenient feature that makes operation safer and easier, especially for repetitive work. The biggest downside is sturdiness. It’s clearly a lightweight, portable table, so there’s some flex compared to heavier, shop-grade router tables. That said, it’s not unexpected at this price point and hasn’t prevented it from doing accurate work when used within its limits. Overall, it serves its purpose and does so well considering the cost. If you’re looking for an affordable, easy-to-set-up router table for light to moderate use, this is a good value and earns its four stars.

Love my bench top router table , the only thing i would change is the intake for your shopvac has this plastic pieces in it and it clogs the entrance on the table to the shop vac hole

Great unit, easy to assemble and to use. Lots of features!

I got this router table for Father’s Day and am impressed with it. It’s a great table for the money, and matches perfectly with my SKIL router I already owned, which I have permanently mounted to the table and bought a new trim router to replace the smaller routing jobs. My only real gripe with the table is the adjustable fence on the left side. The variable depth adjustment makes it easy for the fence to be a little mushy on the end which can create snipe if you’re not careful. I plan to add shims to address this issue.

This router table is disappointing. Yes, it's low-cost, but some of the design choices are oddly stupid. First, the top surface and edges have plastic laminated to them. That's OK, but the bottom surface is bare fiberboard. This allows the bottom to absorb moisture, and that has caused the table to warp. Long work pieces will rock, because the ends of the table are lower than the middle. This is not fixable without replacing the entire table top. Second, the 3 red plastic plates that surround the bits snap into a black plastic ring that in turn snaps into the table top. This black piece is not flush with the table top; it sits about 0.035" too low. That's almost a millimeter, and it makes workpieces hang up as their ends reach the exposed edge of the table top. That causes rough and inaccurate cuts as you have to bump or lift the work to clear it. Obviously, the well for this plastic piece was routed too deeply, which is kind of ironic. It's a QA failure. I shimmed the thing up to the table surface with a couple of layers of Gorilla Tape. Third is the orientation of the Skil router in the table. If you mount the router so that the lift screw is accessible from the top, through the provided hole, then the router-mounted dust port is not usable, since it's at the front. This orientation also makes you reach around to the back to use the spindle lock, which is inconvenient. You can't rotate the router in its sleeve to orient it differently, since the grooves that provide gross height adjustments are only on one side of the router body. The mounting system for the router is puzzling, too. There's a spring-loaded catch at one side, and I thought that would act at a quick release, so you could easily take the router out and put it back. You still have to install and remove the 4 mounting screws, so it's not clear just what the catch is there for. All in all, I would not have bought this if I'd known about these problems. On the plus side, there's a two-outlet electric power box under the top, where you can plug in the router and a vacuum. One outlet controls the other one, so when you start the router, it powers up the vacuum.

This router table is well built and easy to assemble. The size storage is great, but could benefit with more shelves and hooks. The documentation says it will mount a Rigid 2200 router, but the mounting plate will not close due to the close clearance with one of the Rigid router handles. I had to tear off the rubber coating on the handle to make it fit. It also doesn't allow access to the Rigid's through hole depth setting nut. The fence on the table is easy to adjust I like the tracks for mounting the feather boards. The plastic stand seems durable, but we'll see. The miter gage is very cheap and wobbly in the track. I have something better that will work. We'll see how it performs and do an update.

Muy buen producto

A montagem é muito fácil, o encaixe é perfeito. Porém uma das pernas da mesa veio com a porta do compartimento do lado errado. A único coisa que foi preciso fazer foi tirar as anilhas do eixo da dobradiça e colocar do outro lado, foi fácil. Nada complicado. O produto é muito bem acabado e resistente. Ainda não instalei a tupia, mas atenderá as minhas necessidades. Obrigado ao vendedor e a Amazon. Detalhe chegou muito antes do previsto.

excellent produit. Payé 209$ca. Livré dans les délais annoncés. Pour ce prix pas la peine de chercher autre chose. Il fait tres bien l'affaire.

Perfecto en medidas de acuerdo a lo que necesito buen espacio para trabajar Y en conjunto con el router SKIL es excelente para trabajo buena compra!!!!!

Tuve una base similar para router craftsman y esta Skil es muy superior, en calidad y en versatilidad. Los compartimientos laterales son geniales, lo único malo es que no cierran bien las puertas (no son herméticas) y les entra mucho aserrín a esos compartimientos. Por todo lo demás, es un accesorio genial!