Glow in The Dark Pigment Powder - Neutral and Fluorescent Color for Art Painting, Fine Art, Nail Art Paint, and DIY Crafts - Long Lasting, 10+ Color Options - Neutral Aqua - (12 Grams)

I do acrylic nails at home and this was amazing for the color and the glow was on point

I added it to clear nail polish. It glows so bright! I was very impressed and mixes in well. Although, it settles and needs to be mixed at every use. I don't mind as it looks fantastic! Definitely better than regular glow in the dark polish.

It's very bright, that is to say the powder itself has few impurities. Good for mixing with UV curing resin or hot glue.

Works awesome, been using it for years on my paintings. Only complaint is it is grainy, however that is to be expected when using a pigment powder with acrylic paints. Multiple layers needed for a good effect, works best with lighter colors. Comes in tons of colors, recommend a varnish or clear coat to avoid the powder rubbing off after the paint dries.

It does glow!! Read below: First, I bought 4 glow-in-the-dark pigment colors and received one that was the wrong color and never got the blue. Customer service from both Amazon and the distributor/company was fantastic. Not only did I receive a refund for the missing items but they sent the blue pigment free! Thanks! I made a cosplay Halloween costume for my son (Eternity from Marvel’s Silver Surfer series). I used fabric medium and mixed 1:1 with a pigment powder. The fabric medium is very watery so I did 1:1 ratio instead of 3:1 so the pigment could be thicker. Before you begin painting: I cut out a long rectangular piece of cardboard with a smaller rectangle for the head, taped wax paper to each side of the cardboard and slipped it into the suit. I laid the suit on newspaper and painted the body, head and back first, using a 1:1 ratio of titanium white acrylic paint and fabric medium mixed in order to paint base images and stars. After that dried, I used a 1:1 ratio of glow-in-the-dark pigment powder and fabric medium and painted that over the white. I let that “cure” for 24 hours. I then tested the glow by charging the images under a lightbulb for 10 minutes straight and taking it to a dark room. It glowed! But it needs a good charge. Before you use the glow-in-the-dark pigment and fabric medium mix PLEASE paint the image on your fabric with a 1:1 ratio of Titanium white acrylic paint (any brand will do for this purpose) and the fabric paint! You need a white background to paint the pigment/fabric medium on or else the pigment will soak into the fabric and not glow at all. I bought cheap synthetic paint brushes for the project. After the body, head and back dried for 24 hrs, I cut out an arm and leg cardboard rectangle, taped wax paper to it and stuffed them into the legs and arms so I could paint stars on them. I suspect that the reviewers who gave low ratings for the pigments did not read the instructions. It says to mix it with a resin medium. It also suggests using a white background. Since I was painting on fabric, I had to use a fabric medium. The costume was a hit at the school Halloween party (he won Best in Show) and on Halloween night. You must charge the glow paint under naked light bulbs first so it can glow! It will glow for 2 days or more. Couldn’t be happier. I will buy more for the next project.

I purchased the 12 g bag not exactly knowing what I was going to get. I mixed this into a clear epoxy that I used to coat a floor. The bag came with hardly any product in it which I recognize is my fault for not doing more research. It would have been much more helpful if they gave a chart of how much is needed to cover 1 sq ft. I used this bag to cover 60 sq feet of floor with dim results. I have to make it cave like dark and run a flashlight across it to see the glow, which does work albeit dim. I intended this to be a flashlight drawing floor for kids, but you'll need a whole lot more powder per sq ft than I used. The glow didn't seem to last very long either (1hr), which it could be my fault for diluting it too much, but dilution ratios should be provided by the manufacturer for best results which they do not provide. The color it glowed wasn't as white as I was hoping, it had that greenish hue that other common glow in the dark products produce. The amount I used had no effect on the transparency of the epoxy I used, if you use a crap ton more I imagine you'll make it more pigmented and translucent than transparent. I estimate this small bag (12g) would be good in a thin pour of epoxy covering less than 1 sq ft. This powder did not effect the dry time of the epoxy. The powder is very fine and mixed easily into the epoxy using my drill and mixing paddle.

Amazing! The neutral color is easy to mix in and the glow is so strong and gorgeous! Will definitely be ordering more!

I have never tried to make anything using GITD pigment or anything else for that matter. I received this around 6 pm today and by 9pm I had made two glow fobs for use as a keychain or perhaps a zipper pull. I didn't have any other typical ingredients that I have seen other people use when I was researching different ways to incorporate this in various projects. I had some epoxy glue laying around and I had recently purchased a five pack of glow pellets from tech accessories as well as an A 3 aluminum glow fob. The pellets came in little clear plastic tubes so I figured why not recycle them. I was beyond amazed at how well they turned out! I didn't even really measure the powder, I just put all of my epoxy glue in a small plastic lid from some butane lighter fluid then added in what I felt like was enough of the glow pigment. I stirred it up with a small plastic wand then poured it into my two empty plastic tubes. Of course it was slightly difficult to get it to pour into the tube opening but I managed to fill each tube up. I hit them with my UV light for about 30 seconds and it was like turning on a flashlight! I couldn't believe how strong it was! I decided to take pics of my two makeshift fobs so I could compare them with my A3 fob out of curiosity. I will just let the photos speak for themselves (the A3 fob is the green glow in the middle of my fobs)..... I have already ordered more of the glow pigment and I intend to see if I can make a good quality glow ring and perhaps I will order some molds for making keychains or charms or even jars and trays. The possibilities are truly endless! The color quality is amazing! The consistency is perfect for many different types of mediums. The longevity of the glow is by far the best I have ever seen.