GenTent Inverter Generator Tent, Tan, Original - Standard | Waterproof, NFPA-Rated, Ripstop Vinyl Running Cover, for Fully Encased Inverters with Case Perimeters up to 120 inches

As someone who is mechanically and technically astute, I can tell you the construction of this GenTent cover is absolutely top-tier. Setup was a breeze—it took me just 30 minutes from start to finish. ​Living at 8,166 feet in Colorado, my power goes out frequently during severe winter storms. This cover is going to handle our massive winds and heavy snowfall without flinching. The durability is incredible, and I have complete confidence it will protect my Westinghouse iGen8200TFc for years to come. If you need serious, storm-tested protection for your generator, this is worth every single penny.

I bought this generator running cover for my Westinghouse iGen 5000DFc in hopes of prolonging it’s life. I only use the generator to run a couple of essential circuits during outages, but those always come with bad weather, so again, I want to protect my investment. So, the putting together of this tent is pretty straight forward, but also has a couple of trip hazards. The key is to carefully read the instructions. Something that most of us hate to do. IT WILL PROBABLY TAKE AN EXTRA PAIR OF HANDS WHEN MOUNTING THE STRAP that wraps around the generator. While I did not have any problems with the installation, I did want to verify it with GenTent support. They quickly returned my email, verified my install, and offered to respond to any further questions. While the cover does seem a little pricey, it is of high quality, and offers a lot of functionality. A well thought out product overall. It fits well, offers great protection, and durability.

Fairly easy to assemble. The videos from the GenTent site are very helpful. I have not used it yet but I have to assume it will be more than adequate when using the generator in the rain or a heavy storm.

Good: nice quality cover/tarp that will keep your generator dry and out of the elements. Does what it is designed to do once set up and looks nice. Should handle all types of wet weather. Bad: the set up. Kind of a complex process the first time that you do it. Requires measurements which is nice for the flexibility between multiple size generators but can be an issue when setting up in the moment. If camping it’s done but if it’s more of an emergency and setting up for an outage, would prefer something that just snapped in place more easily. Once it is set up it’s hard to maneuver my generator with the cover on since you no longer have access to the handles.

Good quality cover, but not ideal for emergency use. The cover itself is well made and appears durable enough to withstand a variety of wet weather conditions. The quality of the materials and overall design are solid. My main concern is the setup process. It requires taking measurements and involves more steps than I'd like for something intended to be used during power outages. I'm a very experienced DIYer and had no trouble figuring out how to assemble it, but in a real emergency - especially in the dark or bad weather—it can be frustrating. If the last time you set it up was months ago, remembering the measurements and setup details isn't always easy. The last thing you want is to go back to find the manual. I've only used it once so far. Fortunately, the first outage I experienced this year happened during the day, so I was able to take my time and set it up in a well-lit garage. The last two outages occurred on rainy nights, and instead of dealing with the setup, I simply secured a small umbrella over the generator, which took no time at all. I think the product would benefit from a more intuitive design that can be deployed quickly under emergency conditions. While the cover performs well once installed, the setup process limits its practicality for my needs. Because of that, I don't expect to use it again unless an outage happens during daylight hours. If returns were still an option, I would likely return it.

These are fairly easy to install, fits like it should and is great, keeps it all dry, we don't have anything to put it inside so this is great.

The GentTent is a well-made product, and my version is for an enclosed inverter generator. (Westinghouse iGen4500DF dual fuel only ever run on propane). I spent some time 'practicing' with it and trying things out. Her's what's I found missing in the manual. On my generator the grommets at the front and back are different heights. The front to back and side to side measurements are different. You also need a tape measure to set the arms up. However, if you take one of the frame rods and some tape or a marker you can mark the rod and use it as a yardstick. Mine is marked at 6 1/2" ground to grommet for the front, 7 1/2" ground to grommet at the back, 24" for the side to side (23 to 25") and 35" for the front to back (34-36). So, I can assemble the frame without finding a tape measure. Also to help, I put some tape on the corners of the generator at the top of the grommets. If you are inclined and are sure of the locations, you can use marker instead. I've not yet tested this in the rain. I also laminated (waterproof!!!) a copy of the manual page 12 (layout sizes) and a diagram of the front panel of my generator as it is hidden when the GenTent is deployed. However, on my generator most controls are easily accessible by lifting the top flap/cover and peering down without opening the skirt. I'recommend the GenTent for anyone with a generator they need to run in the rain. PS their customer service is excellent too. They messaged to ensure I had the correct version and offered assistance in the setting up. SteveD

Just installed the GenTent on our Champion enclosed 4500 inverter generator. Having tested in the elements yet but it fits perfect!

Nova Scotia has a lot of windy, rainy weather and snow. So I needed a solution to use my generator outside during power failures when weather is harsh. Purchased the GenTent standard black to protect my investment on my Honda inverter generator. Pleased with the quality and installation was easy thanks to the videos on the GenTent website. Easy to remove and place back on. Now I’m prepared in the event of emergencies and have peace of mind I can use my generator in any weather.

This is the second Gentent we have purchased as we got a new generator. These are amazing and work fantastic and protect all the electrical plugs etc. Instructions were clear, a little hard to put on with one person. Would highly recommend.

The Gentent cover for INVERTER GENERATOR (not open frame) Champion model 201424 fits perfectly. However, due to the exhaust being high, the cover must be installed higher potentially exposing some of the generator control panel to rain, etc. A fire retardant vinyl skirt is a must in my opinion to protect the control panel and this recommendation should be made when ordering.

J'ai une Duccar 8500 inverter et la housse est vraiment facile à installer et de bonne qualité! Je prenais une chance en achetant d'une boite déjà ouverte et inspecté à moindre coût et tout était parfait!

I am using this on my Briggs & Stratton inverter generator. I have had this running in 40mph winds on the bow of my boat and it worked great. I ran into a small problem, contacted GenTent and they resolved everything immediately - no hassle. I highly recommend this product.