Sewer Jetter Kit for Pressure Washer 100FT, Newest 5800PSI Drain Cleaner Hose 1/4 Inch NPT Corner, Rotating and Button Hose Sewer Jetting Nozzle Pearl Corsage Pin Waterproof Tape with 2 Spanner

Used on Stormwater drainage lines at my house.Drain jetter cleaned then flushed (with 2 different heads)worked well to clean silt and sediment from the drain lines.worked well with 6.5hp 3000PSI petrol gurni with 50% pressure on pump and RPM turned up to 100%

طقم تنظيف مواسير بطول 100 قدم يتحمل ضغط حتى 5800 PSI، مع فوهات زاوية ودوران للوصول لأصعب الانسدادات. مناسب مع أغلب أجهزة الضغط العالي، ويجي معه أدوات تثبيت وشريط عازل ضد الماء. ممتاز للمجاري والمواسير الطويلة.أفضل طريقة استخدام:وصل الخرطوم بجهاز الضغط العالي بإحكامابدأ بضغط منخفض ثم زد تدريجيًا لتفادي تلف المواسيراستخدم واقي عين ويدين للسلامة

Bought this for my pressure sprayer purchased from Costco (Amazon also sells 3400psi 2.5gpm pressure washers). Wanted to fix my own restaurant drains and not pay someone $400-$500 for each drain. Turns out to work very well in 3" pipes with hard bends and 2" pipes straight shots. Highly recommend this product if you already own a pressure sprayer.The hose is cheap and easily kinks (when not pressurized). Also, hose is not naturally slippery. The hose terminations are solid and show no signs of coming loose. The hose easily handles 3.5k lbs pressure. The pressure tips are well made. The spinning head spins way too fast (and is ridiculously loud) but if you proceed slowly it will clean well enough on a final pass.The price is low and I made it work for my 3" sewer drains.Here's how to make it work for you:- First, clear as much debris as you can from the pipes using a metal plumbing snake. Then proceed to buy this product.- Don't buy less than 150'. Thought I could fix my drains w 50', then tried 100', later realized multiple clogs all the way down to main. That's why you need to buy a very long hose. It helps to push debris all the way to mains.- Unwind the hose and lay flat in the sun to heat it up and to straighten it out.- Coat the hot, black color hose in synthetic wax (big box stores and Amazon sell this cheap for pulling wires through conduit) (Klein Tools 51010 Wax Lubricant) or tire shine spray. Just use something that repels water and is very slippery. This will minimize resistance in the pipes and helps to protect the hose from scrapes.- Rewind the hose into a large diameter for storage. This will help the hose last a long time and keep it from kinking.- Unwind the entire roll of hose flat before use. Hose will not kink easily once pressurized.- Buy yourself a simple water filter for your garden hose before the city water sends a piece of debris into the pressurized jetter head to clog the holes shut. It will also extend the life of your water pump. Rainbird (also sold at box store and Amazon) sells a water filter (RBY075S) with perfect specs for a pressure sprayer. Just make sure it's not the one version with reduced flow control.For the floor drains I had to go the specialty route and buy a P-Trap jetter hose and tips capable of running through 1.5" with sharp bends.

Snaked it first, used my Generac gas power washer to clean it. Easy to connect. I was amazed how well it worked. It pulls in by it’s self thru jets, amazing all 50’ went into the weeping tile. Cleaned it thoroughly.Would recommend to everyone.Great product.

Kinks easily before I've even had chance to use it took an hour to unravel