rabbitgoo Window Privacy Film, Mosaic Stained Glass Film, 17.5" x 78.7"

I wanted something "loft-like" so I was looking for square patterns with larger squares. When the film came, I was disappointed to see the squares were really tiny 5mmx5mm (0.25"x0.25"). I was thinking to return the film, but since reviews were great decided to keep it. Well, it looks really good, it was extremely easy to apply, trim and align. It does give rainbow/sun catcher vibes shimmer and invites light into the window, while giving a good frosted privacy from the outside. Super easy to remove any air bubbles, no special tools: cloth, water spray, and credit card did the job. I used Husky Knife to trim excess inch on one side, and it was smooth and easy. I didn't order enough for all of my windows (i have 4 I needed to cover); so I am ordering more. Highly recommend!

This product worked GREAT! It is effective for privacy and looks fantastic. It was super easy to use. I purchased the clear window cling. I measured and the squares made it super easy to cut a straight line. It also made it super easy to line up the pieces. In my opinion, spraying a lot of water on the window made it easiest to use. I got the bubbles out with a credit card and trimmed the excess with a box cutter. I ordered more for my other windows. It was such an easy installation. The light looks so cool coming through the window. I am so impressed and happy with this product. I added a photo. I didn’t realize there was paint behind it lol I’ll be fixing that

OMG! This was super easy to install, using lots of water does the trick and having a credit card or ruler on hand to work out the bubbles is best. I was honestly surprised at how much it impacted the heat in my apartment. I noticed it within 24 hours the upstairs was cooler than the day before. The pattern is subtle at night, giving me the exact level of privacy I wanted and during the day, when the full sun is hitting it, there are small rainbows dotting my wall and floor!

was able to line them up pretty easily to cover the window. pretty and works both day and night so nobody can see through :)

This window film is amazing and magical looking! I love the rainbow snake skin design while it also simulates a fresh rain water appearance and you can't see from the outside. The light shines in still but its window film, so it's going to darken the natural light a-bit. It's thick and very adhesive and was very easy to apply to the window! Follow the instructions and do your measurements and it'll be perfect. I'm so happy I bought this.

Easy to install, pretty design, good thickness, good texture, but way too much clarity for a window privacy film. Definitely needs to be redesigned for better effectiveness for its purpose.

I needed to block a view into my home but needed the sunlight so drapes or curtains were out. But this worked great. Very easy to put on window, measure, cut ,spray, smooth, dry and it is done. It works great on mirrors too. Made a frame out of it on a mirror and it dressed it up nicely.

We held off getting the “frost” (white) window film for almost two years, as it just wasn’t the look we were going for. None of the designed patterns would cut it for a garage door with windows as big as ours without taking from the look of the door itself. We’re glad we waited. This has the appearance of ice crystals in the light. It’s really very pretty. Best viewed from inside during day (hardly noticeable outside) really pretty from outside with backlight at night, but private. If you have a garage door like ours: the length is perfect for two windows per roll. About 5 inches to spare. The height however is just under an inch short. We’re fine with this as it allows a sliver of room along the bottom (we made 1/4 inch) to see out if needed, and the top doesn’t matter too much (though would have been nice to fit, it’s too thin to attempt filling the gap) Application was easy with tools on hand. Razor, metal drywall patching tool, squirt bottle of dawn soap dilution in water. If you really soak both surfaces it gives you play to slide it around without stretching it, you squeeze out the extra. We found it best to fit to window and mark with painters tape marker bits top and bottom, take it down cut to fit, then remove the back film and spray the (clean) window and back of film. Then place on glass and position. Then get your tool to remove (gently force out) the excess soapy water and bubbles. Start the tool in the middle and move outward (repeat other side), then go down half width of tool and repeat. Then go back top and slide clear across. Wipe the edges with a paper towel or clean cloth to remove extra soapy water that was squeezed out. The first piece went on well. The next two the edges stuck up. This is much thicker than Gila brand film, as it’s removable and reusable.. I actually like this better due to that. I plan to squirt soapy water into the edges again now it’s set to dry for a day or so and see if I can’t get them to sit down properly. All in all I highly recommend. Images attached to show rainbow ice effect (appearance) which makes it look realistic. And a picture with one window incomplete to show privacy. We miss the view, but not when it’s reversed at night for all on street to see in when the light it on.

This was easy to install and looks gorgeous!!! The next day it was perfectly sealed and flat, no bubbles and looks like it was there to start with. Gives great privacy.

Lo he utilizado las puertas de la terraza y ha quedado muy chulo y elegante. No da la sensación de tener algo plastificado superpuesto. Sí distorsiona la imagen desde fuera (se aprecian sombras pero no detalles), y con el sol se ven reflejos de colores. Aún no he podido probar si realmente aisla de los rayos UV o la diferencia de temperatura con y sin él, pero de momento creo que ha sido una buena compra. Colocarlo es fácil, pero eliminar las burbujas no tanto, a pesar de seguir las instrucciones. Es cuestión de paciencia.

Good but costly

Ottime pellicole. Le ho montate senza alcuna difficoltà seguendo le istruzioni nella scatola. Anche se freddo o umido le ho messe anche in bagno) non si staccano, anzi con il tempo noto che sono più salde di quando le ho appena messe. Consigliate davvero

I bought this product to block the direct view of my neighbour into my kitchen and I am very satisfied with the result. It is important to peel the plastic film first (it is in the side of the plastic which feels smoother). Then its important to use a sponge (one of those softer ones) and wet the window and wash it with some detergent. Let it completely soaked and do not rinse the detergent. Then soak in water the plastic previously measured and apply it to the glass. Then use the wet sponge to soak the area even more and get rid of air bubbles. I also used a dry towel to help press the plastic into the glass and get rid of bubbles. It is very important to soak the glass area with water and detergent first and then soak the plastic too before apply. Once applied and edges stuck to the glass and air bubbles under control, let it air dry. It will dry clean and will remain stuck in the glass!