HeatnBond Liquid Vinyl Water Proof and Stain Resistant Gel Coating, 8.68 oz

I purchased this to waterproof the underside of a camp travel toilet seat, which was made of fabric for no apparent reason. The texture of the product is a thick gel, so it's difficult to apply it in a thin layer, but great if you're going for best waterproofing and not worried about a smooth, even finish. I couldn't practically iron a toilet seat (ironing on Medium heat is the way the instructions say to activate the product after 45 mins dry time), so I used a hair dryer on High heat. I held the hair dryer over one spot, about 2cm away from the surface, for 45 seconds before moving to the next spot. It took a while, but the heat from the dryer worked perfectly to activate the polymers in the gel. I'm really happy with the product and glad to have a solution to waterproof the silly fabric toilet seat.

Using this to cover old Converse shoes with fabric. Applies easily, with a brush, and dries clear. It’s also water proof, and has detailed instructions included. Not sticky at all. I’m thinking of using it to cover flower pots with fabric, too! Shoes are still in progress.

This liquid vinyl gel us so easy to use. Simply apply it to the fabric or substrate if your choice with a brush or sponge applying a thin layer- let dry 45mins-iron fabric- VOILA - WAYER REPELLED FABRIC!! This formula cleans up with soap and water if cleaned up immediately. Makes your substrates durable to the conditions of the outdoors. Causes fabric to darker in color slightly- FZBRIC BECOMES LIKE AN OIL CLOTH MATERIAL- ONLY IF IRONED DOES MATERIAL BECOME WATER PROOF INSTEAD OF REPELLED! Thus is a great addition to any Crafter's arsenal of supplies. It is very sticky out of the jar. It functions like a liquid vinyl gel should. User friendly, simply FOLLOW THE DIRECTIONS TO READ ON HOW TO ACHIEVE THE RESULTS YOU ARE LOOKING FOR. GREAT PRICE POINT FOR THIS LIQUID ADHESIVE!!

After 2 layers, drying and ironing between each round, it looks to work really well. I posted a video here and the water just glides down and does not absorb into the fabric and the other (untreated) side remained dry as well. I just used parchment paper on each side (do not iron directly on fabric). It looked wrinkled after the first application, but after it dries and you iron it out (between parchment papers) it straightened out really well. My video shows the latex-type stretch, or dried kids glue texture on the edges. What it's made of exactly I'm unsure, but it works. It has a slight, almost perfume, chemical scent but nothing too potent. *I would NOT use for handmade snack bags/edibles.* I think it's meant for keeping fabric waterproof for outerwear, I'm using them for the inner lining of cosmetic bags.

I had reservations about this project, but if I wanted to avoid covering these fabric seats with big towels every time our grandchildren came over, I needed to do something to protect the seats from staining. I found the HeatNBond on Amazon and bought a couple of jars to try. I first tested it on the under-side edge of a seat, allowing it to dry thoroughly. I then put some drop of red hot sauce on it and let it sit for a minute. I touched it then with a paper towel and all of the sauce was absorbed in the towel leaving no residue or stain. Next I applied one coat to one of the seats and allowed it to dry thoroughly. The fabric initially looked darker, but by the next day it was fine if only very slightly darker than it was originally. Eventually I coated all of the seats with 3 coats and they look great! They have a slightly rougher surface than before but I’m thrilled that I’m protecting our investment! I kept an extra jar so I can do touch ups if need be later.

Got this for embroidery help on seating cover. Was pleased to see it was sealed and contained a plastic half moon to lay applicator on. Consisted of a thickened gel which I applied in a single coating over embroidery design and area of the seating. Took time to dry and did stiffen applied area sufficiently. However, did not like the outcome of the thread colors as dimmed the shine after two applications decided to stop adding more as not to increased in dull coloring effect.

This worked exactly as I wanted it to. The finish is beautiful. I deliberately selected an inappropriate material to reupholster my dining chairs, because the fabric was beautiful and that’s how I roll, and by using this finish on top, it turned into an appropriate material. I can’t remember how many coats I applied, but I know I did several. The chair seats are holding up extremely well, even when the cat gets on them.

A good product. It was easier to use than the iron on vinyl I used before. It waterproofed the fabric but keeps it soft.

Used this to save old, sunbleached curtains into appliques on new curtains, to save the memories Easy to use, will stand the test of time

Good stuff.

Résultat moins plastique que son concurrent. 1 couche suffit pour impermeabiliser. 2ème couche pour un effet toile enduit et 3ème pour un effet toile cirée

I really truly hope that this particular product can be restocked some how some way. Ima have NOTHING bad to say about this product. It’s fantastic. 👌🏾👌🏾👌🏾 Just check out the jacket I made and used it on😍

Applied to lining (quilting cotton ) for 3 waxed canvas dopp bags. Easy to apply (thin coats) and ready to iron in 45 mins between applying coats. These are gifts and hoping it holds up… I love the look and feel.