moofit CS8

I've had a Polar cycle computer with speed and cadence sensors, however the speed sensor has gone faulty and they no longer have replacements. Having used a trusted and well-known brand for a long time, I was a little apprehensive about using Moofit, especially considering the low price. Well, I'm not apprehensive any more! The sensors are easy to fit in just a couple of minutes using the supplied securing bands, which come in different sizes to cater for different bikes. Once fitted, I opened up my Openrider app (I believe it works with a number of different apps), tapped within the app to find nearby sensors, and that was it. All set up in less than 5 minutes. The sensors operate over bluetooth or ANT+ bluetooth. ANT+ is a little more accurate and power efficient so, if your phone supports ANT+, I'd suggest using that. Regular bluetooth works fine and Openrider supports both regular bluetooth and ANT+. The speed sensor attaches to the hub inside your wheel and I attached mine to the rear wheel. This also means that the speed is registered even when I'm using my indoor training, which is fantastic and something I've not been able to do before. The cadence sensor attaches around either pedal crank. The sensors appear to be very accurate and comparable to other systems I've used. All in all, I can't really find fault with the Moofit Cadence and Speed Sensor. I sincerely hope you've found this review useful. Thank you for reading.

Well summer is here so I thought I'd hit the bike. Fancied the idea of adding a bit of tech to my bike and this was ideal. Easily attached to my bike with the supplied kit and good selection of bands in the box. Connecting it to my iPhone app (Wahoo) as also a breeze. Was a little worried that I may loose these going over rough terrain, but they stayed on my bike no problem. Tracking was very accurate too! For the price, great value, and an excellent product overall! Easily recommended!

These are definitely good value for the 2. Small box, housing both. I was impressed there there are a selection of bands to attach to the bike, so should fit most bikes no bother. Really easy to attach to the bike and appear that they should stay on well. The instruction manual is adequate for the basics. The company also emailed not long after receiving the product to provide some further advice for installation. The best piece of advice given was to wake up the sensors by 2-3 turns of the wheels. I did have some issues with trying to pair the sensors. At first I tried with Endomondo which it had mentioned and is an app I use. Unfortunately I couldn’t get it to pair (perhaps because I have the free version?) I tried Strava also, then found that Strava won’t accept it. I then downloaded 2 of the apps the company mentioned - OpenRider and Wahoo. Had no issues getting the sensors to pair with these, in fact it was fast and very straightforward and they have worked fine on my rides, though Wahoo only seems to want to use one of the sensors at a time. I have since found that both Apps ‘should’ be able to send your ride details to Strava afterwards, so i will try that out. For me, the cadence sensor hasn’t worked so well - I think it’s better suited to users of cleats. As I just wear trainers I did find that my foot would knock against the sensor when I stopped and started. Perhaps I could change the position or put it on the other side. However, for me, I think it is better suited for on the indoor trainer. Overall, happy with these.

Fitted day of arrival, strapped on and test rid for 15 mins and all is good 👍 Connection with Garmin Instinct was quick and hassle free, speed seems to be correct so far as does cadence. Using this on rollers with 5 spoke carbon wheels so I have uploaded pics to show how I connected it as obviously you can't fit to a hub like you can with traditional spokes. Two rubber bands, 1 used normally as you would on a standard hub to hold the sensor in place (band A) and the other (band B) is used for lateral tension to centre the sensor in the hub/wheel to be as close as to where it would normally sit. So you start by attaching A to one side of sensor as standard; then thread A through B, then wrap B around blade while wrapping A round the outer edge of the hub, and once again thread A through B before clipping on to sensor as standard. Easy as pie and giving out good readings so far on a quick 15 min pedal. I will update once I have put it through a longer session but so far so good and very happy 😁

Both products set up fine, connectivity to my garmin edge was established without issue. On first use the cadence sensor was fine for the duration of the activity. But the speed sensor was not. Within a couple of miles it was suddenly starting and stopping continuously. I had no option but to just remove the battery to stop the madness. I'll be returning the items forthwith.

Bought these one month ago. Both the cadence and speed sensor worked perfectly on short rides. When trying on long ride, Speed sensor stopped working after an hour. I read the reviews by other users and saw someone saying that they added a piece of paper to the battery compartment and it solved their issue. So I followed the same method to avoid any loose connections and took it for a ride this morning and same result. Cadence sensor is fine. As its over a month now, I am stuck with a faulty speed sensor

Work really well with my bike in garage which I have sat permanently on a turbo trainer. Connects easily via Bluetooth to app I use (wahoo which then feeds into starve too). Easy and speedy to fit and good battery life.

This was so simple to install on my (cheap) static bike, and was recognised by my Garmin watch instantly. The speed sensor was attached to the top of the crank arm, and cadence sensor on the inside of the crank arm (see photo). I've not done a full session yet, but the watch does pick up the speed and cadence when recording an indoor ride (and, most importantly, the distance). Just remember to adjust the wheel size on Garmin, to get an accurate distance. At less than £25.00 for both, it is a steal. Update - with the speed sensor, it is necessary to adjust the virtual wheel circumference if using on a spin bike. My Garmin automatically set this to about 2300mm, but I had to manually adjust it to 3700mm so that it correlated with the speed and distance shown on the bike's very basic display screen. It takes a little perseverance, but worth it. I'm now going to get a second set for my road bike, and pair them with my Garmin Edge.

funciona correctamente

Capteur Cadencé ok Capteur vitesse non cohérent : A l'arrêt il donne des vitesse 2-3km/h. J'aurais atteint 94km/h!!!! En roulant, ne donne pas du tout la vitesse réelle.

Om man har stora korvfingrar som gör det svårt att spänna fast gummibandet på navet, kan man karva till ett strumpstickeliknande verktyg av en blomsterpinne enligt bilden

Works great so far with spin bike and my Garmin watch! I attached the Cadence device to right pedal. But could not attach Speed device to front wheel so attached it on top of left pedal crank with the medium sized band, and it is very secure. Because of this configuration, I had to change wheel size from the default. In my case, spin wheel was 2005mm, and changing the wheel size to 4572mm allowed the cadence, speed, and distance to exactly match the bike's computer. To set up with Garmin watch, just go to settings > sensors, and you should see both devices listed. If not, just spin the pedals a bit to wake them up. Once the watch connects, you can set up the wheel size, and even rename them (see my photos). It might take some trial and error depending on your bike to match the same speed and distance on your bike. In the Garmin Indoor Bike activity, I set up fields on the watch screen for cadence, speed, and distance. I can see the devices updating these live. Pretty cool! You need BOTH cadence and speed devices to calculate the distance. Before using, you have to take out the little clear plastic disc in the battery compartment first, and the compartment door is a challenge to line up correctly to screw back on straight. Other than that, I am very happy with these speed & cadence devices. They work great!

Sensörleri yaklaşık 1-2 aydır aktif olarak kullanmaktayım ve bağlantı kurduğum aygıtlardan 2si garmine ait ürünler ve ikisinde de sürüşe başlamadan önce verileri aktarabilmesi için bağlantıyı kes ve tekrar bağlanma yapmak zorunda kalıyorum birde dış kasası hiç sağlam değil pedaldaki kadans sensörüne ayağım çarptığı için tırnaklarından biri koptu ama çalışmaya devam ediyor onun dışında gözlemlediği hiç bir sorun yok