JFG RACING Electric Dirt Bike Foot Pegs for Surron Light Bee X/E Ride Pro

I bought them for my 2022 CRF250F. All CRF250F models 2019-2023 (at the time of this writing) are identical aside from their plastics. I’ve attached two photos. I’m really happy with these pegs. My frames of reference are the stock Honda pegs, and the Flo Motorsports pegs (which were $180) on my 2022 KTM SXF. As far as their feel in your hands - weight, material, etc - both Flo and JFG feel the same. I can’t tell any difference in materials or quality when I told them in my hands. As for the grip on my boots, thanks to the cleats, feels really great. They feel just as secure as the Flo Pegs. I haven’t slipped yet. Compared to the stock CRF250F, the JFG pegs are astoundingly better. The stock pegs are useless for any sort of grip. The tops of them are literally rounded. The stock pegs are steel, so the weight different is pretty obvious when you hold them in your hand. When you’re riding, it’s not a big enough weight-savings to notice. The price - I was really concerned with the lowass price. My high-end Flo pegs are literally 5x the price. But I have no complaints with the JFG pegs. I think they look pretty sweet too. The blue pegs match the blue on the 22’s graphics. I’m also adding blue braided steel brake lines, so all those blue accents will look pretty hot. Noteworthy: 1. All of the cleats were loose. I could remove each one with my fingers. Before you ride, remove all your cleats and add a dab of threadlocker. Tighten securely, but remember the pegs are aluminum, so don’t over-tighten. 2. I ride my CRF250F in the woods and rough terrain. But to experiment and for fun, I tried it on a motocross track, and the pegs held up just fine to the landings. 3. The pegs rest at a slightly upward angle, a negative camber. Compared to the stock pegs that sit flatter. But I like the angle. It’s easier to rest my knees on sides of the gas tank where they’re supposed to be. It looks like the pegs can be shaved with a simple metal file to correct the resting angle to a factory setting, but I like them the way they are. These are good pegs. If you have whatever the price is when you’re shopping, pick up a set if you’re still on the factory pegs. Those things suck compared to the JFG. They’re a great value.

Great upgrade for my Surron Light bee. I feel way more attached to the bike. Much lower price than name brand and they have held up really well.

These are great. Fit my 2024 XR150L with no issues. Installed in 10 minutes and they look great. I ended up reusing the OEM springs that came with the bike. I recommend them if you are looking to upgrade the original pegs that came with the bike.

Not sure how it fits other motos Build quality seemed good

I ordered a pair of these for my son’s Rawrr Mini/R and my daughter’s Rawrr Mantis X. The pegs arrived extremely quickly, next day morning, and packaged exceptionally well to ensure safe delivery. It comes in an Amazon box, then a cardboard box with thick foam. The pegs come with extra spikes which is nice. It does not come with the cotter pin nor the spring. If you need these parts you will have to order it separately. Fitment was loose on the Mantis Mini/R but two small washers was enough to fill the gap and eliminate any wiggle. The stock Mantis cotter pin and spring worked fine with the new pegs. On the Mantis X I only needed a single washer to eliminate any wiggle and again, the pin and spring worked fine. The quality is nice, a bit on the thin side for the anodizing but none the less, still looks great and will get beat up with usage anyways. The value of these pegs is amazing! I had found so many pegs online but Amazon had the best price and the best delivery speed of any competitors I found. I would highly recommend these to others!

These did not even come close to fitting on a stock KLX 110 L.. do not waste your time if that’s what you’re buying for. Unfortunately I tried to make them fit by cutting on them so I won’t be able to return.

Fires great and is tight just like stock pegs. Angle is perfect. Grip is strong. Great upgrade

We replaced the stock pegs on our new Surron X Light Bee. We felt that the factory grips, while looking nice, did not provide enough grip. Looking online, this seems to be the same opinion of many others. These pegs are lightweight and easy to install. Please be aware that these pegs will require additional washers/spacers in order to accommodate the tension spring correctly. Note that these pegs do not come with a tension spring. But you can reuse the existing spring so long as you have 4-5 washers that are about 5/8 size. There are a bunch of how-to videos about these or similar pegs on YouTube. Follow what they say. Remove the ring clip and slide out the pin. Put in the washers and the spring. It is a bit tricky to do without unbolting the peg holder. We were able to do one side by removing the entire assembly but did the left side without having to remove the peg holder. We are happy with this product.

Bought this for my 2023 surron LBS. they fit good and very grippy

Pédale ne sont pas droite et mal conçu

Super sweet upgrade

These are great foot pegs. Wide and stable with great grip on my boots. High quality finish and JFG has very consistent color matching, (I bought the red shifter and brake foot levers). They collapse well and were easy to install. They even came with several replacement studs.

Matches my luna brake calipers, looks awesome for the price