2pack Wire Mesh

Perfect grid size of wiring and material composition for a small project involving an outdoor grate. Very good quality and arrived in timely manner.

These worked perfectly for me for DIY pasta drying trays. If you read other reviews one of the more frequent comments is about they being sent folded. I knew that and did not like it but purchased anyway, and for my purposes I did not mind. That said, in my opinion: Yes, they can be unfolded and MOSTLY flattened. However, if it is important to you that there is absolutely NO sign they were folded then I would pass and look elsewhere. I worked fairly hard to see if I could totally eliminate that visual evidence and I could not.

Good!

This worked absolutely perfect for my project!!! I used it to go around a sump pump to keep trash out. Worked great! (watch the edges...they are very sharp)

So the grate that separated the hickory chips from the heat source wore away in my standalone smoke device. I searched for a stainless steel replacement grate I could fit to replace the original as a replacement part was not available. I bought this product, easily cut it to size, used a 1000 deg epoxy to hold it in place and installed it. Although the grate openings were 0.5mm smaller than the original, the maiden voyage was perfect. The grate and epoxy look like new. A really good product at a good price.

Using this as a prefilter on the intake of my shop’s movable exhaust hood used for welding and grinding. Stopped problems with paper towels and plastic wrap cutting sucked into the exhaust fan. Doesn’t seem To cause much loss of flow, easy enough to shape and cut to fit my round intake.

As others have mentioned, the panels are folded but they are not creased. I was able to flatten the panels out using heavy books and weights. It does not completely get rid of the bend, but looks pretty good. My biggest gripe is that the mesh will not stay together in areas where the weave doesn't hold it together. It comes apart easily. I used it to repair my fire pit chimney and it did a pretty good job. It looks pretty good after painting it with high temperature paint and so far has held up very good. For the price though, I consider it an above average deal which is why I give it three stars. Not exceptional but not bad either.

Product was packed well and shipped for quick delivery. It is Stainless and the mesh size and wire diameters are as described. Its a bit pricey, but given the small cut size, thats to be expected and is fine; I don't want to have to buy a whole roll or sheet of this, so thanks to the seller for offering these small cut sizes! Also, the fold-line (as described multiple places in the description-to reduce shipping cost) can easily be restored to near-perfect... it just takes some smallish pliers and a few minutes to gently work the mesh back flat and straighten the wires out to be even more flat than the rest of the panel. I am using this mesh to prevent foreign object debris from entering the oil cooler air ducts on my ZR1. The wires cut easily with sheet-metal shears and the welds do not tear away easily indicating adequate weld penetration to provide sufficient strength for a non-woven mesh. Woven mesh is generally considered stronger but was not an option as my shapes have narrow portions and the resulting short wires tend to fall out of the weave. This welded mesh eliminates that problem, but requires proper weld process control to produce a strong mesh. My shapes were easily hand-formed post-cut, and without any issue of wire separation even wirh the small-ish (but as-described) wire diameters. I can recommend this product if the described physical parameters meet your requirements.

Product quality was good and per my expecttation