Celestron – NexYZ DX – Universal Smartphone Adapter for Telescope, Binoculars & Spotting Scopes – 3-Axis Precision Alignment – Capture Images & Video Through Your Optics – Includes Bluetooth Remote

Fantastic product! Heavy-duty and sturdy. Don't let the reviews stating this is tough to set-up turn you off. If you have a sun filter, try setting this during the day. So much easier when you can see the knobs. Also, look to U Toob for the "paper over the aperture" option. It works amazingly! Great buy!

This phone adapter holds my "phablet" and it is able to hold it over a 2" eyepiece. The micro adjustment knobs can be difficult, but the ability to micro-adjust is still amazing. The view will be like looking down a hole due to limitations on phone cameras, even so, I was able to take a picture of the Orion nebula using the x3 setting on my phone and it came out really clear.

Easy to use, versatile with different phones. The build is tough and easy to secure to any eye piece i own. I did a few live streaming on the moon and this is a Mmust for stargazing.

I tested 4 different phone attachment devices and this one (in my opinion) came in a close second to one made by Accuview. I think both are very capable and this one has some benefits that might tilt your decision in it's favor. The most important positive for this one is that I found it insanely easy to use. Insanely. Easy. To. Use. The co-axial X-Y knobs were fantastic and the Z knob worked as desired. At first I thought the claw shaped clip would be a big negative but once the "safety clamp" was tightened down it was remarkably stable and it gripped solidly. The other pro is both a plus and my one negative - the whole unit is made of plastic. This means it's much lighter than a similar unit made of metal but it may not be as durable. A usage note - If you're looking for a phone mount like this you really must also have a remote shutter release device or you'll be fighting "the shakes" at every picture.

Bluetooth shutter arrived with fully dead battery CR2032,... changed it and quickly discovered likely reason,.. it has no power OFF button, and to remove battery you must carry around a fine point Philips screwdriver,.. annoying. Battery should not be preinstalled, the screw is a captive button, so not easy to remove of the equation for fast long term storage with battery removed. Aligns "perfectly" as package states is a bit overreaching, it really depends on what you are expecting... this is made of plastic extrusions or mold casted you can see the bends under weight/loading at various of the dovetailed sliding sections. It provides no adjustment for tilt nor nod,.. which happens to be needed due to non stiff enough plastic material, so you get some parallax angle error. (Shimming sort of solves, but is not fast nor practical, as the amount of flex varies as you "zoom in/out") Is it a fair buy at the price point?.. I would say it is a great buy at 35-40usd. Probably my view is skewed as I happen to have on site machinist capabilities/materials and tools, so I can see the manufacturing pitfalls/shortcommings more than average user would care. Decided to buy vs make my own due to cost-time balance.. and it does come with the bluetooth remote shutter,.. I can't make that on the lathe/mill,.. Does it hold the phone steady? Yes, much more than bare hands. So,.. if 60 bucks don't hurt your wallet at all,.. then it is an excelent buy. What about vs the 20 usd designs with no 3rd axis? Well if your application doesn't need frequent zoom in out for focus change,.. just get a cheaper one and shim the phone on the mount, save 40usd. A pitfall on all these telescope/microscope items is to not provide sturdy casings for storage/care with the item itself,.. people buy tools of this nature and expect to later transport them in airplanes and for them to be part of the inheritance one leaves behind, carboard boxes are cheap and convey a message of cheap quality contents.

The xyz celestron phone adaptor is quality built. Was able to mount securely both an iPhone 7 and se on the adopter with no problem with their protective cases on. The three adjustments in xyz allowed easy alignment to my eyepiece. Personally, I found it best to connect eyepiece on adapter before inserting into telescope and then fine adjustment for final alignment and focus. Over all a well engineered piece of equipment. The remote Bluetooth camera button linked with no problem, just hold down remote button for 5 seconds to connect. More expensive than competition, but worth it for a well engineered xyz adapter.

This is a truly universal adapter and it is generally well designed. However the vertical gear plate is made of plastic and the plastic carriage that rides on it are a bit loose. There isn't any easy way to tighten it up. The flexation will cause the phone to be slightly canted in relation to the eyepiece, introducing light (daytime use) and making it slightly more difficult obtain focus. For the premium price, I would expect no issues but there are some less than perfect materials and somewhat sloppy function. Still one of the best out there for it's adaptability.

Llegó en perfecto estado, no se cómo no lo había comprado antes, es una herramienta demasiado útil. Se adapta perfecto a mi telescopio y el Bluetooth es excelente.

A sturdy, well made mobile phone attachment for a telescope, easy to use and a good fit. Value for money for the quality of this attachment.

Muy bueno. Cumple con su propósito

Best option for starsence DX6 celestron telescope 🔭

Reçu aujourd’hui de très bonne qualité le seul souci la vis est trop petite de la télécommande pour changer la pile, mais il y a déjà une pile à l’intérieur Pour info cet appareil de support téléphone où télescope et digiscopie est compatible et en matière aluminium pas en plastique

Worth every penny. Not used it out yet but build quality is amazing