Gelid Solutions GP-Extreme 12W-Thermal Pad 80x40x1.5mm. Excellent Heat Conduction, Ideal Gap Filler. Easy Installation

This is an excellent product and does what it says. I am running my raspberry pi 3b in the armor case. With stock thermal pads, my pi overheated in around 20 seconds while running the cpuburn test (temp > 85 degrees). Switched to Gelid pads and ran the test continuously for 40 minutes and the max temperature my pi reached was 65 degrees! I bought all the three variants, i.e., 1.5 mm, 2 mm and 3 mm for my future needs, though for raspberry pi 3b with armor case, 1.5 mm and 2 mm are sufficient. It is helpful to sand the thermal contact points of the armor case to remove the black paint it comes with. This pad is better than some of the commonly available thermal pastes, so go for it with eyes closed.

Why did you pick this product vs others?: Good quality thermal pads for high performance laptops and gpus....best i class

Using it to cool the VRMs on my GPU. Working well so far, more than a year into their use. Pad is pretty large too, so it'll last me for a while and for multiple devices in the future.

Performs exactly as advertised, no mislabeling nonsense, and it genuinely works. Brought my RTX 3080 hotspot temps from 100°C down to ~65°C. I was thrilled with it in 2021, kicked myself for cheaping out on dodgy pads earlier this year, and had to buy the proper ones again before 2025 was over."

The product is not as good for money my gpu rtx 2060 used an artic thermal paste with this pad but i checked the temperature from the scanner and still shows the maximum temperatures it reaches is above 87 with this thermal pad but when i bought a better brand based thermal pad it was better than this and my temperatures got to 82-84 even after playing games 2 hrs i would recommend it for people who run servers or for cooling of ssd or ram only if it really works for you. And i recommend thinking about buying more than one piece of this product

I have a 5 yr old 1080ti, never opened it and it always ran under 75c. Then I decided I'd clean it and put some new paste + thermal pads just for the sake of it and even though it had a slim (1.0mm) white thermal pad which was worn out on many places, it still worked fine. Then I ordered, 1 of these 1.5mm ones since people had good experiences cooling even 3080FE and boy was I dumbfounded when I applied it. The 1000 series doesn't have memory temperature sensors, or at-least mine doesn't but they are running super hot, probably 80c on idle. Can't even game without GPU overheating and crashing the pc. Temps are reported 60c on idle and that is in ambient room temperature of 20c, in games they quickly rise to 85c. I triple checked the application and even put in more thermal paste the main gpu die, the same paste on the CPU reduced temps by 15c after a decent OC. I ran the GPU to its limit then checked for temperature and it looks like the MOSFETs are the hottest, which I wasn't able to envelop completely with the thermal pad. I wouldn't say this doesn't work, it does but 1.5mm and only 1 of these is a bad idea. Always order 2 and more thickness (+ a little more price, for me it was 2x) is a lot better than a dead GPU.

I recently needed to clean my GPU and reapply the thermal pads with thermal paste. After searching for the right materials, I ordered this product, and it turned out to be exactly what I needed. My GPU temperatures have significantly dropped from 90°C to 65°C. I'm really satisfied with the results—thank you!

My GPU, which used to run at 90°C, now runs 20°C cooler after pairing it with MX-6 thermal paste — love the product! I’m also getting 20+ more FPS in every game

Diese Wärmeleitpads absorbieren sehr gut die Wärme. Wirklich qualitativ hochwertig und für den Preis echt klasse. Habe damit knapp 9 Grad VRAM Temperatur bei meiner 3080 herunter gehen können.

Quedó de maravilla acopló exacto

Used on my RTX3080

Excellent and easy to use product!

Original