Eastwood B60 Sand Blasting Cabinet | Steel Sand Media Blaster Cabinet Kit | for Paint Removal, Metal Restoration, Rust Removal, Sandblasting | Holds Up to 120 Lbs of Abrasive Media

great cabinet, works well

Cabinet went together easily enough. Took a rather long time but easy enough. Doesn’t leak as some have reported. 2 suggestions for assembly though. Attach the gloves to the front before installing the front. There is not much room to get the clamps on with the cabinet assembled. It’s almost impossible to get the vacuum elbow into the grommet on the back of the cabinet. Remove the plate that is over the inside of the mounting hole & push the elbow through. Replace the plate. As others have said, this cabinet doesn’t work well with soda. It’s not designed to. Stick to glass beads (not crushed glass) or other reusable media & it works fine.

I put it together yesterday and started using it and knew I was happy I bought it. Did have to use some sealant on some areas and the protective screen doesn’t adhere very well and fills up with blast media. But it still works well.

Great cabinet, reasonable size. Very sturdy. Good quality gun. Comes with extra glass protectors and gun tips. Two man job to assemble the legs, one guy inside the cabinet, one guy outside. I also needed to disassemble the rear duct to install the vacuum tube from the inside. The grommet kept popping out when I tried to install from the outside. I used the cabinet to remove paint from some cast iron hardware using medium grit glass bead blast material. Worked great.

The sandblast cabinet works great. Assembly was OK until I got to the legs. What a pain. Difficult for a single person to do. They should have used captured screws. Worse, now I have to repeat the process because I'm tired of sandblasting on my knees and have ordered the taller legs.

This is an outstanding product. Using it to do a frame off model a. Saving me a lot of hard labor to clean parts to prime and paint. You will not be disappointed with this.

I bought this upgraded blast tank in hopes that it would eliminate all of the dust that my other tank let out. This doesn't do much to help, even with the vacuum attached. The latch on the lid broke in the first week and the gloves in the tank are too short to reach to most of the tank. They are also meant for huge hands, I can barely use this tank because the gloves are huge but it works for my husband. The plastic protective screens don't last long either. It needed replaced after two weeks of use. Up side, this tank doesn't leak sand from the cracks like my other tank did and this has the built in light.

Cabinet works as it should. Needed something that didn’t take up alot of space in my already cramped garage for media blasting random parts like valve covers and other small parts. The included internal light isn’t necessarily bad, but I usually have a second magnetic led light on inside the cabinet while im using it. Comes mostly assembled except for the feet and light etc. When mine arrived i pulled it out of the box and one side had a pretty ugly dent in it already. Cabinet itself looked to be in worse shape than the cardboard box it came in, however that works lol. The dent doesn’t affect the blast cabinets performance..it just ruins the excitement of getting a nice new shiny tool, that’s already slightly beat up.