1156 Bulb Reverse Light, Led 1141 1003 7506 BA15S Bulbs, 12V-24V 54-SMD Used for Truck Car Backup Reverse Lights, Tail Parking Lights,Camper Trailer RV Interior Light, 4pcs White

Whenever I replace an incandescent bulb on one of my vehicles, I like to use the brightest, largest LEDs possible. You can think of regular incandescent bulbs as tiny space heaters that also happen to give out some light. LEDs run cooler, are more energy efficient, and last a lot longer. The downside to LEDs in automotive applications is that they're not typically as bright unless you have several LED dies (individual chips that emit the light) grouped together, and the light is very directional (IE you only tend to see it from a narrow range of viewing angles). You can get around the brightness problem by making the bulbs bigger and incorporating more LED dies onto it. Because of the increased efficiency of LEDs, you can still get bright bulbs with relatively low power consumption and heat. You can get around the directional light problem by having the LED dies all around a cylindrical body so that light is emitted in every direction. If done right, what you end up with is a bulb that is brighter (and, more importantly, will retain that brightness longer) than a typical incandescent, while running cooler and using less power. I used these to replace the turn signal bulbs on my motorcycle. One bulb blew out and I decided to replace all four of them at once. Because LEDs draw less current, they can flash at a higher rate of speed (approximately 2X on my bike) than regular incandescents. If this bothers you, there are LED-compatible flashers available for many applications. I don't mind so I'll probably leave them for now. These things are BRIGHT. They're uncomfortable to look at directly, and they lit up my garage as they flashed, even with the overhead fluorescents on. Good-- I want nice, bright lights to get the attention of other drivers. In this case, visibility is safety. These are a no-brainer. If your vehicle uses amber bayonet-style bulbs in this size, get these. They beat incandescents in every single category except perhaps cost. These bulbs are about $3 apiece while the best price I saw for 1156 incandescent bulbs is $1. The increased cost is negligible, and it's well worth spending a couple of extra bucks on these.

Fit right in and saves power win win

Nice & bright

These lamps worked great. Very bright and an easy install. However, they seriously sped up the flash rate. I only replaced the rear lamps so far. They did mention this possibility in the notes for the product. Good lamps.

I was a bit skeptical at first but since the price was not too bad I decided to take a chance with these LEDs. I did have to file down one of the two pins on each bulb because the locking pin placement did not perfectly match my 2024 Suzuki GSXR 750 socket. But even with just one usable locking pin on the side the bulb was held in the all sockets securely. I replaced all four turning lights on my bike and am very glad with the results. One thing to keeping mind, because now it is LED, I did have to replace the factory flasher relay for a aftermarket one that was made for LED upgrades so you don't have a crazy hyper flash going on when using the signal lights. Great product, these small upgrades make me feel a little safer on the road. Here are some before and after the upgrade photos.

Great for Cab Lights. Amber is a good color, Very Bright! Steady light, no Flashing.

Very good product! Fit perfectly in my 03 VW Jetta GLS. Love them!

Bien