Allparts BP-2006–010 Tremol-No Large Clamp Chrome

El mejor sistema para bloquear un tremolo

Buen diseño, se instala fácilmente. Recomiendo busca información sobre el montaje en YouTube para hacerlo rápido y bien. Cumple su función perfectamente, anulando el trémolo y así evitas desafinaciones en la guitarra. Recomendable para guitarras con sistemas de palanca de baja calidad. La única pega es el precio, bastante caro por una pieza de metal y cuatro tornillos.

dopo qualche tentativo (non del tutto corretto) di montaggio ci avevo perso le speranze dato che comunque si scordava un pò andando in drop tuning, poi dopo aver capito bene come si monta l' accordatura non si muove di un millimetro. Consigliato.

Floyd Rose should have a locking option. This feature on Kahler trems allows you to lock, then tune and then adjust the float claw screws to the proper level. See the Kahler video on setup to see what I'm talking about. I decided that I would like to lock down a couple of Floyds. This product allows you to lock your Floyd in place into a hard tail, a single direction trem or leave it fully floating. Fully locked is the easiest setup. The thumbscrews that lock the piece in place are solid and stable. The company also offers replacements. Check out their site for details. I installed into a Schechter Hellraiser with Sustainiac. The screw holes were aligned properly, I didn't need the ground screw but it is a clever idea. The cons are that it is not easy to get into the back panel to change your trem on the fly. There should be an option for a back panel with an easy open clip door or a wider opening. Anything other than the 6 screws to get into the compartment. Ok. But if you are choosing a setup that's permanent or semi-permanent this will not bother you. Another con. I chose to leave the trem as a one-direction. So I screw in the claw and connect the springs like in the video. Then I lock in the clamp. The trem is exactly in the place it was before. Great. I lock the thumbscrew for one direction use. And then it wouldn't sit completly flush. The tuning went flat. I had to adjust the stop piece for longer than I wanted to spend tightening and loosening screws before I found the right spot for it. Then I discovered that the screws on the tone block clamp do not allow for full travel of the trem. This is good because you can install it on a lot of different sized tone blocks. And if you are fully locking the trem no problem. But if you will use the trem you need to buy a dremel tool and a cutting wheel. Or a very small metal saw. Because you have to cut the excess so the trem has as much range as possible. Hope this helps.

Decent price, solid construction; this is what my Musicman jp7 needed (or at least what I needed for it so I could jump between drop c, drop a, b standard etc… without too much fuss). All parts in a nice neat package, instructions aren’t comprehensive, or really there at all, but there is a wealth of videos on YouTube that detail exactly how to fit these beauties. Simple, straight forward and, aside from desoldering the ground wire, completely reversible in no time at all. Nice.