Minwax Wood Finish Water-Based Semi-Transparent Color Stain, True Black, 1 Quart

Great wood finish, just takes a day or two to fully dry. This was my first time painting furniture and I’m happy w the way it came out

I used the black stain to redo my son's dresser armoir. The black stain allows the wood grain to still show but adds the darkness I wanted for a teenage boys room. I used a matte finish polyurethane to seal it and it turned out beautiful!

It is what you want when you get a Danish oil. This is dark walnut on fir cannon trunnions and a walnut rifle stock. Great finish on both applications.

I used this stain on a kitchen table I made out of Ash. The tabletop is end grain, making the staining more challenging than the face grain aprons and legs. The main issue is with trying to get the color even. It's very susceptible to lap marks. I found I had to saturate the work piece and work very quickly to get it on the surface and then quickly remove it. If you let it soak in to the point where it's starting to dry, you're in trouble. Ultimately the project turned out looking very nice but ended up doing the staining 3 times until I was happy with it. That meant a LOT of sanding. And that was after spending time on smaller test pieces. The small test pieces were easier to get good results with because they lacked the drying time issues. I should mention that the humidity in my area was fairly low at the time. It can produce a nice result, but just be aware that it's not quite the same as other stains you may have used.

Just as described no complaints, very good coverage. Good if you don’t want to see the grain of your wood.

This is not like normal stain. It was thicker than paint. I used it on a picture frame and was unable to wipe it off before it dried on 2 sides. I'm going to have to paint it black now.

I don’t always use stain but if I need some this is a good brand n color.

This stain is tricky to work with if you let it sit for more then 10 seconds, drys super quick and splotchy if left to dry. I found if you add a little bit of water, it’s a lot easier to work with.