Rust-Oleum Automotive Truck Bed Coating 946 ml - Black.

Product arrived quickly as per usual Amazon shipping. My plan was to use this to fix some rust on the inside of my trucks tailgate. Stripped the rust down to bare metal, primed and used a paint brush to apply product. It has some texture, and since the bottom outside of my tailgate also had some rust showing, i sanded down the bottom quarter, that matches theblack trim on my FX4. For the flat part, I tried a small roller, but that really brought up the texture, so smoothed out as best as possible with the brush. After 3-4 days of drying, the product looks great, and looks like it seals up tight.I also had some smaller paint chips coming off the outside of the doors, so I masked a straight line and prepped both doors and jams and applied the coating to those. Looks great & adds some stone chip protection too. Since my truck is a two tone with a dark grey bottom, it is not as noticeable if I tried to use in on a lighter color. I'm planning on purchasing the gallon size next, and finish my truck bed, but will probably use a roller, and a spray can to finish off the tough to reach areas. It seems to be thinner than expected when first applied, but using a second coat really builds up the thickness. I also cleaned up my trailer hitch with a light sanding, and applied to that. It makes it look brand new! Prep the surface per instructions,and use a paint brush for smaller areas. Very happy with this product

Easy to apply, good coverage. Happy with the end results

Bon

I used this to waterproof a tow behind trailer's domed cover instead of the problems associated with fiber glassing. It seems to have worked out VERY well after 4 weeks of towing at speed (45 to 70 mph ). No erosion noted, and we have had a lot of weather (rain ), used three coats after a period of cure ( 2 to 3 hours ) between each. I should add that the mileage is probably a little more than most people would put on. ( approx. 200 miles per week )

Great product, and easy to work with.