FARBIN 12V Electric Air Horn Kit for Truck Car Motorcycle with Wire Harness

Horn works beautifully and was very easy to set up. I bought a toyota plug kit separately so I didn't have to cut my original wire and it came with spade connector to use the relay ground wire... Overall, 4 out 10 dificulty to install, sufficient length, loud and lastly no more meep meep... only PAAW PAAW

These were pretty difficult to get to fit in place of the stock horn, but once I was done I was very pleased with the sound. The kit comes with a low tone and high tone horn that are a minor third apart just like most factory horns of this style are. So, these are two-tone unlike your standard little "beeper" that many of you are probably here to replace. Definitely get it with the harness. I'm not sure I would trust the stock horn wiring to handle these two horns at once without blowing a fuse, and it additionally made the installation process a little easier for connecting the two horns. Before you go to install these, you will need: - to know how to crimp wires, and have a wire crimper/stripper (you probably already own some. they're like $5 if you don't) - butt connectors (yes, they're called that at the hardware store) - ring/fork terminals (for cars with only one horn wire). Connect the white wire on the harness to a grounding point with one of these terminals if your car only comes with one wire. - a set of sockets and screwdrivers. for most cars you'll only need a 10mm socket but might need a few different ones to get access to the horn. Whole process took me about 45 minutes including trial and error. Check all grounding points before you try the horn and make sure that the hood closes, too. Will update this review should I have any issues down the line.

Simple to install, complete kit, decent quality, but the loudness isn’t much (I’d at all) different than any standard car horns. They are functional and I hope they last.

Wife is facing too many instances of people making unsafe lane changes on the freeway. She wanted louder horns b/c the stock (Scion xB) ones sound too wimpy. I thought of installing the air horns but they're too large. She approved this one. They're definitely louder. I did not use the harness that came with it, and they work just fine. The only extra wiring I had to do was to connect one terminal to ground on each horn.

DO NOT BUY. This hit 110 dB max with both horns installed.

Very good

Installed these on my Kawasaki Z900, This is how a horn should sound. Absolutely worth it!

I have it wired to a toggle switch but I’m stuck on where to wire the blue and white wires to? Can’t get it to work