Custom Moulded Security Two-Way Radio Surveillance Earpiece Set, Thermo-Fit Designed for Clear Acoustic Tube Radios | Model: +Awareness

Easy to mold and works great. I was able to lower the volume on my walkie talkie since the fit was so nice.

Amazing earpiece. I work in corrections where it can get very loud. These earpieces allow me to hear everything in the dorm but still hear the radio. They are not the most comfortable but they are not uncomfortable either. They can be remolded pretty easily. Definitely worth the money. Get someone to help you mold them and follow the directions.

I was interested in trying this earpiece because its the only one that offered a 'custom' mold which I was hoping would (a) keep the piece in my ear better and (b) improve sound quality. It was very effective in keeping the piece in my ear, but my ear felt occluded and it definitely impacted my ability to hear surrounding noise. I found I would always turn my head to orient my free ear when talking to people. My biggest issue though was related to comfort. This isn't a cheap earpiece and as others have mentioned the tough thermoplastic material is hard! My ear started feeling sore after a couple hours. I probably could have 'gutted through it' but found other options that were more comfortable. I REALLY wanted to love it, and I don't hate it - in fact I keep in my pocket as a back up, but it isn't my preferred piece. Also, I found it a challenge to mold in my ear. I got it after a few tries but its certainly isn't a thing of beauty! My thumbprint is indelibly marked into the outer aspect where I kept it pushed in while cooling and it looks misshapen, although that's just an aesthetic issue, which doesn't impact sound quality or usability. I didn't find that it increased the sound quality over any of the other ear pieces I had, although that's probably more a function of the headset used. But still, I was hoping that by putting the tube right in my ear it might have increased the perceived volume a bit. Alas, that was not the case. All in all, not a bad choice, but not for me. Would try again if they offered one that used a softer plastic.

I’ve spent way too much money on acoustic tube earpieces and accessories trying to find something that doesn’t drive me ABSOLUTELY UP THE WALL when I’m working. With the curved pink ones or the clear shark fin ones, I was constantly having to reach up and adjust it or push it in or straighten it out or stretch out the tube or clip it in a new spot - it was incredibly distracting and frustrating. With Decibulls Awareness, it stays in THE WHOLE SHIFT no matter how much I move around, whether I’m wearing a coat, if it’s hot or cold, whatever. It stays in place for consistent volume and it is COMFORTABLE. Not only am I not reaching up to fix my ear every 30 seconds as if it’s a tic, but I forget I have it in. Buy this one if you are as neurotic or sensory-sensitive as I am.

These earpieces are decently priced and come with everything you need for either side, but it just didn’t work for me. I used the left side and custom molded it but every sized attachment just hurt my ear even after short periods of time. The noise cancellation was also more than what I expected, it took away a lot of outside noise when I specifically wanted to maintain decent outside hearing which is why I bought this specific model. Quality is good as well just didn’t work for me. I resorted to a black silicone piece and I can’t even tell I’m wearing it.

I'll admit admitted I had some trepidation about the molding process. Take a little more time in the hot water than you might think. And you should be careful that it's not too hot when you stick it in your ear. Several different sizes of earbud are great. On the other hand, they indicate you should replace them, but there doesn't seem to be an obvious way to purchase replacements....? Should also be noted that you can use these different sized earbuds without the fancy molded earpiece. Just another option, which you may want to go with? The fancy molded part makes the tube stick out from your ear in a manner that can feel a little awkward. You get used to it. I'm getting a little older and I've developed tinnitus. So when I'm in loud environments after a while, I can't hear my radio hardly at all. So this really does help a lot. Updated January 18. I have revised my product review to one star after having an opportunity to use these in the field on and off for several weeks. Really, they don't work so well. The connection sticks out too far from your ear, so it's not exactly easy to keep it in. It tends to wanna get pulled out. Also, the connection point to the part that goes in your ear keeps popping out. I end up spending more time fiddling with it than using it. I would not advise wasting your money here.

These custom-molded earpieces are a game-changer for long shifts. Once molded properly, they fit perfectly and stay secure without discomfort. The audio clarity through the acoustic tube is solid, and the +Awareness model still lets in enough ambient sound to stay alert. Be prepared for a little trial and error when molding them the first time, but once done, they perform great. Ideal for security work or any job requiring reliable comms.

Easy to mold or remold. Works great! Assortment of ear pieces allows for a comfortable custom fit.

The brilliant headphones

No es para nada lo que anuncia el vendedor. Me llegó una porquería que es de plástico y esta totalmente incómoda…ni siquiera la voy a usar

Bonjour, je déconseille au personne qu’il veulent acheter des écouteurs de radio à mouler car c’est du plastique dur et il y a pas les écouteurs mouler du tout. Ça fait cher pour 31€

J ai eu de la facilité à les moules et tienne super bien en place et pas douloureux après une journée de huit heures et la transmission avec radio 5/5

Working in security for 9 plus years and be through multiple headsets and various different ear tips, this is by far a standout. Working 12 hour shifts in a variety of quiet and loud environments it’s been great, better sound quality that your standard silicone mushroom shape tip. Only consideration where the headset tip fits in to the mould it is quite small. I’m not sure if it would fit a large tip.