Bloss Window Film Striped Window Decal Non-Adhesive Privacy Film, Vinyl Glass Film Window Tint for Home Kitchen and Office (17.7" x 78.7",1 Roll)

I was looking for a way to add privacy to my home without blocking the beautiful natural sunlight (or my cats’ favorite window views) and I think I’ve found the perfect solution! This window film features alternating frosted and transparent stripes that can be applied either horizontally or vertically, depending on your preference. The installation was surprisingly easy. Everything you need is included except for water and a spray bottle, which most people already have at home. The film cuts easily with regular kitchen scissors, and each window took me less than 10 minutes to finish. Tip: Clean your windows thoroughly before applying! Any dust, lint, or pet hair will show through once the film is up. The included edge tool works great for smoothing out air bubbles and tucking in any extra film around the window frame giving a clean, professional finish. I’m very happy with how this turned out. Great quality, easy to use, and it looks fantastic. Highly recommend!

I used this privacy film on some windows that I wanted to get some privacy in, but also be able to see out. Also, the cats really like looking out the windows so the view can’t be 100% blocked. The clear stripes are 1/4 of an inch and the frosted stripes are 3/4 of an inch. ( the product page gave the metric size of 1 cm and 2 cm respectively). This privacy film is the perfect balance. Filters light ( frosted stripes) and you can see out if the thinner, clear stripes. Very easy to use. I’ve read reviewers that said there was no backing and the film slid off when applied. That’s incorrect. There IS a backing, it’s thin and clear and can easily be missed. . It says in the directions that you need tape to separate it from the film. This is correct and easily achieved with a little patience. Recommend using a utility knife, a straight edge, and clamps to clamp the film to the edge of a work bench to hold it in place. To get a nice clean cut, I put a piece of pressed cardboard on the bench so the cut would be clean, keeping the blade in the utility knife nice and steady. Once I had my cuts, I separated backing from the film, I used a spray bottle with water and a drop of dish soap, sprayed the window, the affixed the film where I wanted it. You can move it around easily to get it just right. Then, I used a little craft squeegee that has a felt end, and got the water and bubbles out. After that, I gently rubbed the area with a small towel. The film edheres well, and it looks great weather it’s sunny or cloudy. A nice amount of light comes through without neighbors being able to see in. You really have to be up close, looking inside ( or outside) to see clearly through the Clear stripes . Nice quality product, easy to use. Recommend. I’ve attached phots from indoors and outside.

This product looks very cool when installed, but it does not afford much privacy. It was fairly easy to install, and I put it on my door window by myself. If window is small, one person can do it alone. But one can see through the areas that are not frosted, especially at night with light inside the house. I had to install a second layer on top of the first, then it was private.

The paper is really good. Good quality, easy to work with. If you want it to be perfect make sure to clean aand scrap the stains on the window, if you dont really care, just clean and have some soapy water next to you to keep spaying when needed. I only cover the bottom part of the window and i can clearly see the difference. Theres no way to see anything from the outside. I will definitely recommend this papper to my friends and will re-purchase for the rest of the windows at home.

This very easy to install and it looks great. It allows enough light for plants and you can still see through the window but it adds a little bit of privacy- like having your blinds open

In comparison to the reflective shade film I got at Walmart, this one is such a waste of money. The Walmart one blocks far more sunlight. It also stays on the window without adhesive. Installing it is dead easy as long as you measure the window and trim to size before putting it up. This one needs to be adhered to the window. It’s a sticker after you pull off the protective film. An incredibly thin, sticker that is bound to stick to itself in the process of installation, resulting in lots of creases. You might be thinking, “Well, maybe you just put it on wrong? Didn’t follow the instructions?” The first time I screwed up the adhesive from it sticking to itself. The second time I was methodical about it. I clung it to the window using just water to see if it would stay — it didn’t. The corner started lifting within a couple hours. I started unpeeling the protective film from the top right corner, just enough to get it to stick to the window in its already aligned position. Then I slowly peeled all across the top, again just enough to get the top edge to stick. The idea being that if I just slowly peeled the rest of it, it would 100% be smooth and aligned. Once I got the top edge down, I sprayed the window with water per the directions it came with and started peeling. Simultaneously while peeling, I had a squeegee making sure it was going down evenly. The water got trapped in the film instead and the film is so thin that trying to squeegee it out actually creased it permanently. It’s also so thin that it was entirely not aligned by the middle point because of how flimsy and bendy it is. Maybe it would’ve worked better if I hadn’t followed the instructions with the water? I’m keeping them up for now cause it’s better than nothing. Once the non-adhered ones fall off, I’ll be picking up more film at Walmart.

This window film fit perfectly! I cut it to me needs because I didnt want to cover the entire window. It provides the perfect amount of privacy while still letting light in. The film was easy to hang. Make sure you spray a good amount of water and smooth all the bubbles out, then the film stays in place once dry. Would recommend and buy again.

The film is silver and the other half is not transparent

Looks great. I had put up another brand of this type of film and it was too frosted and thick. This one is sleek and just enough frost to buffer the view. Installed this Niviy film on the side windows of the front entrance door and it looks so good. Easy to install.

Absolutely love the privacy it gives but also still let's the light in

Looks great and easy to install - very happy with the results - was not looking for privacy, just a distraction on the windows for the birds and this provides that without obstructing our view

J'ai bien fait comme demandé et j'ai des bulles qui restent dans la fenêtre ! Dans le passé j'ai fait d'autres fenêtres avec le même produit et il n'y avait pas de bulles. Eau trop savonneuse ? Mauvaise batch? Je suis déçu ! ±++++++++ Après quelques jours, plusieurs bulles sont disparus ! ************