Bath Safety Grab Rail White, 16 Inch Stainless Steel Anti-Slip Shower Handles for Elderly, Grab Bar with Ridges, for Towel Rail, Disabled, Injured, or Post-Op, Bathroom Safety Aid

After 18 months in our shower these still look like new! Very robust, and look smart - we didn't want to have something which looked too much like a disabled shower room but appreciate the extra hand-hold. Nothing to criticise at all. We had a second one to put on the wall by the toilet and older visitors have remarked on how helpful they have found it.

Pleased with this Grab Rail. It was easy to install on wall at side of bath. Makes a difference to getting in and out of bath it also looks nice as it matches chrome fixtures. Good value for money. It arrived next day with prime. Would recommend.

This is a good product, but I knocked off a star because it came with no instructions. Whist it isn't hard to work out, if you're not confident it could be a problem. So here's what I did to fit mine. I decided to use the wall fixings that came with it, which require a 6mm drill bit. I put mine up onto tiles so here's what I put together as my tool kit: - 6mm masonry bit - 14mm spanner - Phillips screwdriver - Pencil for marking out - Masking tape for drilling into tiles - Small hammer for knocking in the wall fixings In the kit is the main handle, two fixing plates, two cover trims, two 14mm bolts, 6 screws and 6 wall fixings. I did a dry fit first, the cover trim slide on first, then the mounting plates fit onto the handle using the 14mm bolts, so that the head of the bolt is recessed and won't foul the wall when all built. Once I understood that, I dismantled the handle again, loosely fitted the top mounting plate and held it up to the wall. When I had it at the right height I covered the area behind in masking tape and marked for the holes. In with a 6mm drill masonry bit and drilled the holes, pulled off the tape and gently tapped in the spiky fixing plugs. 50% of thee drilling done, I bolted the top mounting plate to the handle and nipped it up. It doesn't need to be very tight. I also loosely fitted the bottom mounting plate to the handle and then fitted it to the wall, so that the bottom plate could be marked for holes. From here, a bit more drilling, repeat of above, and then screwed to the wall, covers on, all done. It's a sturdy handle, supports weight well and does what it needs to do. Shame there were no instructions, but it wasn't hard to get my head round it.

Good quality. Didn't use as decided against drilling.

Well made very strong, I feel safer in shower with this grab rail to hold? Very happy

Smart compact bathroom grab handle, Easy to assemble and fit to wall,very easy to hold onto when needed.

They look and feel good out of the box. However they have not yet been installed. They are the same size as the ones provided through the ocupational therapist, so hopefully will be as good, just look nicer!

These grab rail made getting into and out of the bath so much easier and safer and easy to install

Schnelle lieferung und gute Ware.

Je précise le modèle car j'ai longuement hésité. 30 cm me paraissait trop court si on retire les coudes. 8 vis et chevilles fournies. Perçé dans du plâtre forêt de 8. 6 trop petit. Ca tient bien. Belle finition. Les 2 plaques de fixation sont gainées de caoutchouc et par dessus vient se clipser le cache blanc. Du plus bel effet. Les fluos pas pû verifier,faut que j'attende une nuit sans lune 😀

I am a below the knee amputee and need use prosthesis. I needed some support to climb the two steps from my garage into my home. I bought this to add this grab bar to my entry from the garage . What a sturdy grab bar and a tight grip. Its quite easy to hold on to because its not as large in diameter as the other traditional grab bars.

Zien er mooi uit, zijn degelijk, eenvoudig te monteren en voldoen goed. Kortom: aanbevelenswaardig!

Son fuertes y cumplen la función. No sé oxidan compra muy buena