Ontel Carwash Cannon Foam Blaster Nozzle Gun for Car, Truck, Boat & More - 5 Spray Settings, Just Spray & Rinse, No Residue or Film (Packaging May Vary)

I don't understand the reviews saying this is cheaply made or it doesn't work. I've used it twice, to wash two different cars and it worked as shown in the video I saw of it, and as described in the instructions. As for being cheaply made, what do you expect for $20 ? But it's really not cheaply made: The handle and other parts are made from high quality ABS plastic. The container that holds the soap solution is of a decent size and seems to be solid and not flimsy. The spray gun handle seems solidly made and has a good feel to it and doesn't feel cheap. While it's possible to make the various parts of the foam cannon from metal, that would quadruple the price and increase its weight. So small compromises have been made with its design to keep it low-cost but it's still very effective. Though most of it is made of ABS plastic, if it is taken care of it should continue working for a long long time. So far I am very pleased with it. It created a very decent foam from soap that is not specifically a foaming soap (Karsh soap). I would imagine with a soap that is designed specifically to foam it will work even better. The dial on the soap container allows setting the foaming level. Since I was not using soap designed to foam the dial seemed to work best at #5 position which is maximum foam. For settings #1 to #4 I didn't notice much foaming difference. The #0 position puts out clear water and is very useful because you don't have to take of the cannon and use a separate spray gun. Though that's what I prefer to do to free-up my movement around the vehicle and not accidentally mar the vehicle if I get in really close. However, nothing is perfect and there are some pros and cons: Pros: -Very easy to use -Inexpensive - rivals foam cannons costing 3 to 5 times in price. -Does not require a pressure/power washer -this is a big plus in my opinion. -Works with a typical garden hose and water from a spigot. -Ability to dial-in the foam level or switch to clear water is very useful and saves time. -Comes complete - no additional items required (except soap and a garden hose with water are need). -Worked quite well for me. -Did not leak at all. Cons: -It is made mostly of ABS plastic but it does require some care that it's not abused. -Fluid container should be a larger. Overall though, I think the Pros indicate a very cost effective product. If you do get this, I would suggest that you purchase some quick-connects, as I did, for attaching to your garden hose and the foam cannon to make connecting / disconnecting it easier. In addition, a shut-off valve can also be added to the end of the garden hose so you don't have to run all the way back to the spigot to turn off the water if you disconnect the foam cannon and attach a spray wand or spray gun. In terms of Durability I did not provide a rating. Time will tell how well it lasts at which point I will update this review. If you don't have a power/pressure washer and want to use a foam cannon with just your plain old garden hose this foam cannon sees to be excellent. Just be sure the pressure from your water spigot is at a good level to maximize the foaming and distance you can send the foam (or clear water). (If you're wondering about water pressure, 40 to 80 PSI is what is recommended for a garden hose spigot for home use.) Yes, I definitely would recommend it to a friend.

The carwash cannon is a great product. Everything was exactly as advertised. I enjoyed using the foam cannon as I washed my new car. It was greatly satisfying. I truly look forward to using The Ontel Carwash Cannon Foam Blaster again. Thank you and keep up the good work of creating great products people love to use.

I purchased this because of the price and I guess for the price it works okay. First off I have public water so my pressure is not to bad. This thing does not cover the car in foam like the pictures show but it does an adequate job. My next complaint is the foam nozzle does not lock into place, at first I had to break myself of the habit of grabbing the washer by the foam nozzle only to have it pop right out. My biggest complaint though, is the threads on the soap bottle are not good enough to support the weight of a full bottle if dropped. I had filled the bottle full of a mixture of foaming soap and had about one third of the car washed when i went to reconnect the spray nozzle back to the bottle and naturally with my hands being wet with soap on them I accidentally dropped the whole thing and the bottle popped right off spilling 90 percent of my soap mixture. I have a Green Works pressure washer and bought a foam sprayer to use with it and it puts this thing to shame with the quality of material, solid brass for starters, and guess what, it cost the same. I purchased this for those times when I don't feel like hooking up the pressure washer. UPDATE After using the foaming cannon for awhile I would give it minus 5 stars if I could I can no longer get the foaming nozzle to stay in the canister it just blows out on the ground and once again I dropped it because of wet soapy hands and it came apart spilling all the soap on the ground. I wouldn’t recommend this to my worst enemy it’s a piece of junk that’s going in the garbage.

This product is a you get what you pay for and I've definitely had this come apart on me a few times it is also leaked and I have purchased other ones that are a little more expensive but or a better quality. If this is something you're going to use consistently I would probably recommend getting something a little more durable. it is very easy to use and easy to assemble. It's a good size for my small hands.

Seem to work OK but the plastic that’s on the handle handle that pulls the pin to allow the water out broke poor quality too bad a disappointment

I was so surprised at how great this little Cannon works. My poor car was Really dirty and now it looks bright shiny clean. It was much easier to dry, just lightly. My car is 26 years old and she she doesn't look a day over 10 . 2000 Jeep Cherokee (the engine everyone Loves :)

If you’ve ever dreamed of combining your garden hose with the riveting thrill of subpar foam, then this is the product for you! Let’s talk about the “revolutionary foam blasting technology” – if by revolutionary, you mean a semi-effective way to cover your car in a sad, thin mist of soap that resembles a dairy spill, then sure, let’s go with that. I attached this marvel of engineering to my hose, and I’m still waiting for the “thick cleaning foam” to appear. The foam’s about as thick as a tissue paper, so if you were hoping for a frothy white avalanche, prepare to be disappointed. The five spray settings? Absolutely groundbreaking. They range from “a gentle mist” to “a light drizzle” and culminate in “a slightly stronger drizzle.” If you’re expecting the power of a pressure washer, you might want to temper your expectations. The only thing this blaster excels at is making sure your driveway gets a taste of soap, while your car remains steadfastly dirty. And let’s not forget about the build quality. The foam cannon is constructed from what I can only assume is the finest quality plastic, which feels about as sturdy as a disposable cup. I’m actually in awe of its ability to flex, bend, and generally feel like it could break at any moment. The hose connector? It’s made from the same indestructible plastic, so don’t expect any miracles if you decide to use it more than once. Cleaning your car with this? Well, you might get a decent workout with all the scrubbing you’ll end up doing anyway. I tried using the water directly from the nozzle, and guess what? It was way stronger than the foam. So, if you’re looking to save money on car washes, just get a garden hose and save yourself the disappointment of this overpriced bubble machine.

I’m impressed with the Ontel Carwash Cannon Foam Blaster. It’s super easy to use and connects right to a regular garden hose, no special setup needed. The foam coverage is excellent, and it makes washing my car a lot faster and more thorough than using 2 buckets and a sponge. The adjustable settings are a nice touch, letting you control how thick the foam comes out. For the price, this thing works way better than I expected. It feels solid, doesn’t leak, and gets the job done without wasting a ton of soap or water. If you want professional looking results without breaking the bank, I definitely recommend it.

After ordering this item, I got a bit worried after reading some of the reviews here. Used it for the first time today and it worked like a charm. It connects and disconnects quickly and does not leak ant the cannister mounting point or at the hose attachment point. As for using alot of soap, there is a line on the cannister to which you fill it with soap and the rest with water - I used to put more soap than this when I used the two bucket method. The suds coverage is surprising. Very easy to use, suds the car up, wash with a wash mitt, disconnect the soap cannister and rinse. The only thing it won't do is clean your car by simply spraying the soap and spraying it off - but then you shouldn't really expect it to.

Stop Searching this is the One Very Good Foam Blaster you can adjust to the Max and i put more Car Shampoo like 90% and add only 10% water and i Spray onto my Car and WOW my car turn into a Snow White Foam Amazing Products ....a Must Buy Highly Recommended

Buen producto

Amazing hose cannon

Was looking for a foam cannon for my garden hose as I didn't have a pressure washer. This was the cheapest I could find locally, at half the cost of the USA branded ones. I thought, nothing to lose. If it didn't work I'll return it, but lo and behold, it does actually work! The build quality is good - brass fittings throughout and also came with a filter to ensure grime doesn't get into the hose and bottle. My water hose doesn't have great pressure, but nonetheless it still worked at setting #5 (the highest)! Having used it once, I'll try a more concentrated formula for my car shampoo. Only minor gripe is the water bottle is not big enough - was barely sufficient for my sedan. Probably won't be enough for a larger car.