BestOffice Big and Tall Office Chair 500lbs Desk Chair Mesh Computer Chair with Lumbar Support Wide Seat Adjust Arms Rolling Swivel High Back Task Executive Ergonomic Chair for Home Office (Grey)

Originally purchased in January of 2023. After 3 years of daily use, I have had 0 issues with this Big & Tall Office Chair. The chair Looks great and is easy to assemble, the parts are extremely sturdy with adjustable arms and lumbar support to get that custom fit. The seat cushion is thick and stays comfortable, whether I am working from home or going for a late night gaming session. The adjustable height piston stays in position and does not need to be constantly readjusted. You will Not be disappointed with this chair, Comfortable, Well Built, Best Bang for your Buck.

I bought this chair for my husband after many years of trying to find a chair that was comfortable, that would hold his weight (he is 6' 1 and usually ranges between 300-350 lbs) and would last. In the past I would buy a chair that would say it held a weight more than what he currently weighed, and every time after a year or two the hydraulics would begin messing up or just quit working and he would be sitting in the lowest position the chair would allow. I came across this chair and the reviews I read were positive enough I figured we should give this chair a chance. When we initially received the box there was a hole in the bottom corner, which would not have bothered me except that the hydraulic bar was missing. We contacted Amazon. They had us send the chair back and promptly replaced it. After getting the replacement my husband held out with his busted one for a while until I finally remined him that I did not buy the chair for it to keep sitting in the box that was currently being used as a table. I pulled it out and put it together very easily. I don't recall fumbling with it at all. He has now used it for close to two years and it does not show any signs of the hydraulic wearing out. Bonus for us, even if it does wear out, the chair sits higher than normal computer chairs do so it won't cause him the normal discomfort the other chairs do of sitting lower. The seat cushion is still firm and has not flattened out. I feel like a little kid sitting in the chair when it comes to the size of the seat and height of the chair. My husband can sit all the way back in the chair and his feet don't rest on the ground unless he tilts his toes downward. He loves the chair still. I'm sure him losing weight (he is now below 300 lbs) will help the chair last even longer!

May 2nd 2024 update: Chair is completely unfunctional due to bad metal (the plate under had a giant hole like it can't handle 220lbs). I slide comepletely off the chair because the base now sits at a 45 degree front-wards lean. This can only be fixed via welding and is a manufacturer error. Both myself and Amazon customer support tried to reach them and they've ignored us. Amazon can't do anything after 30 days and since this broke down completely in May nothing can be done. DO NOT BUY FROM THIS COMPANY. TERRIBLE CUSTOMER SERVICE. May update 2024: The chair has a significant lean forward and metal is starting to break under the seat. It has about a 30 degree lean forward to where if I try to slide under my desk I actually fall out of the chair. It creaks extremely bad as well, with many pop sounds. I have no idea how this is still listed as I'm only 220 pounds and it's almost completely broken in under a year. Anyone who's heavier is at significant risk of injury. February 2024 update: Rocking has gotten so bad I've almost fell out of the chair to the side even with the locking mechanism in place to stop the seat from it's natural rear-recline. The seat under the fabric is falsely made to seem like its cushioned but it's like a hollow, hollow plastic square of a seat. Almost like a giant tupperware with a thin cushion jacket around it. I can lean in most directions and hear it pop from flexing to and from its shape. It's extremely uncomfortable now because of all this. No actual cushion, constant leaning (the level on locks the reclining in place, there's nothing to stop it from leaning as its not supposed to do that to the side.) My tailbone hurts everytime I'm in this chair, it's terrible. Avoid at all costs. Original 2 Month review: Assembly was pretty straight forward. You have to tighten (as per the instructions) the screws every 2 weeks. Yet despite doing this, a weird rocking has built up slowly since the purchase. No amount of tightening will fix this. So I'm assuming if I'm lucky this chair only has a 4-5 month life span since it's already doing this 2 months in, as the screws aren't the problem.

Honestly bought this as a hold over until I can afford a high end ergonomic chair... With that said I'm really in no rush to replace this. I'm 6'4, almost 300lb, the chair feels great. The assembly was slightly annoying (I just wish the base was preassembled and welded instead of the machine screws- still very sturdy!). The mesh back is change for me and feels great in long gaming or work sessions, the seat cushion is very respectable for the money Pros: +Feels sturdy from the moment I sat on it +Solid metal/steel support components +Price to value (to me) +The "3d armrests" adjust vertically easy but don't rotate like my old chair... Which I prefer!!!! The can be adjusted narrow or weirder with an allen wrench/key (came with a solid one and a nice handle to make building easier) +Decent instructions +Decent lumbar adjustment Cons: -Assembley can be cumbersome, might need an extra pair of hands to hold things in place to assemble, although if you're patient take your time you can do it alone. -each spoke on the base is attached with two fairly heavy duty machine screws, does feel good, but personally just wish this was preassembled and welded. -if you're significantly taller than me, say 6'6 and above the back my might be a bit low. For me I prefer this for acoustic reasons (I'm an audiophile and don't want my head in reflection zone like most gamer chairs do). But if you want a head/neck rest maybe reconsider.

This chair is perfect. I weigh 315 and am 5'6. I wanted something sturdy and comfortable. The base is heavy sturdy metal. The seat is pretty comfortable and is nice and wide and deep. It doesn't need an extra cushion but I may get one just to be even more comfortable. The seat depth fits the back of my knees just right. The arms are adjustable up and down and also in and out. I use them to help push up out of the chair and they seem sturdy. The arms could be a little longer but they work fine. The back is a little high but not like some huge high backed desk chairs. I like the mesh design. The chair is big but doesn't seem overpowering and bulky like some large size desk chairs. The back is arched just right and there is not a big gap between the seat and back.

I had this chair sitting in the box for quite awhile and I finally bothered to assemble it. It was fairly intuitive to install. I started with the wheels and moved my way up. Most of the parts seem fairly sturdy and it rolls well. However it doesn't have a number of features I would have liked such as being able to adjust the seat pan or the arms. You can adjust the arm rests but you have to do it manually with the included driver. Also you can only have the chair go up or down. Sometimes when I'm sitting in the chair it doesn't feel quite right but it is comfortable. My main issue is the mech back, while it works is shedding alot of fabric and that started on day one. I was sitting in the chair, got up and noticed later that the back of whatever I was wearing was covered in the chair's fabric. Would I buy this chair again? Probably not but it also wasn't ridiculously expensive either.

This chair is sturdy and comfortable especially if you need something for a bigger person. I'm a bigger guy over 350 pounds and I needed something that was going to be comfortable but also could handle my weight. This chair is really wide in the seat and has a lot more cushion than I expected. The back support is also great. It looks like your classic office chair and it has steel parts not cheap plastic. It is well worth the price.

Easy to put together. Good sturdy chair. Great for someone tall!

Pleasantly surprised. Wide seat. Sturdy build. No more arm rests digging in my sides. Slides well, easy to build. So nice to have a chair that was affordable and fit my hips

Ok here's the skinny... I am not. I'm 5' 5" and likely over 340 lbs (I don't use scales because they're toxic to my soul). The average width of a seat is not problematic unless the arms aren't adjustable so I wasn't looking for a wide seat chair as much as a deep seated chair. You see, I have a plentiful backside and unless there are gaps between the chair back and chair seat, that fleshy part of my body pushes me forward. I'm always trying to prevent myself from slipping off (especially leather seats). Pros to this chair: 1. The seat is deeper than the average. 2. The arms are set wide because the seat is wider than the average. 3. The arms can be tightened against the seat or an inch or so away from the seat so very accommodating. 4. The arms can be left off entirely. 5. The chair is fabric (not leather) so no slipping. 6. The seat cushion is thick enough that my backside feels cradled *winky face*. 7. The chair was relatively easy to assemble by myself. Cons to this chair: 1. The chair is a little higher than the average chair so if you're shorter like me, you'll likely need a foot rest. I mean it is advertised as "Big and Tall" so I should have expected that. 2. The chair feels a tiny bit wobbly. Now it's entirely possible that I have some more tightening to do. 3. The 'lumbar supoort' is not well placed or adjustable enough for someone with an extra large backside. I would like to be able to raise it higher. 4. The chair doesn't seem to roll as smoothly as my last chair. I recommend this chair to large bodied folks and in fact I've already suggested it to some friends.

The chair came in one box. Which was completely intact. My husband is a larger man 350+ lbs. He spends a lot of time at the computer, mostly playing games and doing research. I’d been looking for several months for a new chair, because our old one was very sad to look at or sit in. I checked out the previous reviews on this particular chair and had it in my cart for awhile. Closer to the Christmas holiday 2022 I decided to take the chance. Once my husband opened the box, it took minimal time to assemble the chair. I would highly recommend this chair to anyone. We all love the fact that the seat is a little wider than normal, and comfortable. The rear of the seat prevents your back from becoming overheated. There’s nothing worse then your shirt sticking to your sweating back!!! It’s a genius design. I’m surprised that more chairs aren’t like this. There are 5 of us in our home. The adaptability of the seat accommodates everyone. I have back issues and I’ve got no issues sitting in the chair. I honestly wish I’d purchased the chair long before last Christmas season.

This is a really good quality chair. Definitely built extra strong and fits a big & tall person very safely and comfortably. Also looks great.

Update: after a year of use the cushion is really uncomfortable and so it the lumbar support. They put some sort of metal structure under the cushion that pushes upwards and you can feel after sitting for a bit. Same with the lumbar support, that stupid “massage” thing has little balls in it that dig into your back. It’s not worth the money you save, buy a more expensive chair. The good, I'm a tall big dude, 6'5" 280lbs so its hard to find chairs that are comfortable and at least right now this is comfortable. It also seems to be made out of decently thick steel for the most part which gives me hope it will last a decent period of time. Putting it together was pretty easy, took maybe 30min, they give you an allen key that you can torque without hurting your hand which is nice, they even give you spare screws. The bad, it doesn't use standard parts. The gas cylinder is a class 4 which is good but its only 14" long and an inch of that ends up below the chair, standard size is 15.5" so its not very good for tall people. Also, by the amount it sank when I sat in it, I doubt it will have decent longevity before it starts sinking and needs to be replaced. I have to have it on the highest height in order to be at a normal desk height. Also, the wheels are also not a standard one, they're tiny which is fine for looks but if you roll over even the smallest bump in the floor it gets stuck, also something you'll probably have to replace in the future. The bottom piece is not one piece, it’s how IKEA does it where the legs are screwed into the centre which reduces its longevity. Lastly, the lumbar support only moves 2 inches and is quite small so it doesn't really end up in my lower back. All in all, like I said in the title, if you can get it on sale which I did for 163 CAD including the 30 dollar shipping, its a good deal if you compare it to the other chairs for those of use descended from giants, which are closer to 250 or 300 but don't expect a chair that doesn't creak or wobble a bit cuz it does and made vary clear by the numerous large stickers all over it, its very much made in china.