Frosted Glass Spray Paint | Creates Etched Glass Appearance, Windows, Doors & Decorative Glass Surfaces, Adds Privacy While Allowing Light, 11 Oz

It worked good for me and probably will for you. I purchased this particular brand and product because it was the lowest price offering for frosted glass spray paint. Amazon was also the lowest price by quite a large margin compared to local big box stores on this item. This Rust-Oleum frosted glass spray paint covered well and resulted in a pretty good uniform coverage of my glass windows. You can no longer see through them yet a very good amount of light still comes through. I only covered the inside of the windows. I figure that the outside would be more likely to get scratches or some other damage to the paint as time goes on and only one side needs to be coated in order to get the desired effect. This paint smells very much of chemical like acetone or finger nail polish remover if you are familiar with those. Maybe its toluene. Its a very potent smell and very flammable also so have plenty of open ventilation like a couple of large open windows or doors - to the outside of the building, not just into other rooms. I had two doors to the room open to the outside and a pedestal fan going to suck the fumes out and it smelled very strongly of the odor for half an hour or so after I finished spraying. The odor was so strong that I held my breath while spraying and then ran out and caught my breath and then went back in and sprayed another pane until I was done. I did 2 coats on each pane of glass to ensure even coverage at the edges. I did one window and have 3/4 or more of the can left. Result: now people on the street can't look through my side porch windows all the way through and beyond. I like it.

Rust-Oleum Frosted Glass spray paint worked very well to provide the frosting look I wanted on an otherwise clear plastic container. I applied one coat and let it dry about 15 minutes then applied another coat and my project turned out just the way I envisioned it. It's best to wear a mask because the paint fumes are strong, and spray it on a nonwindy day! Great product for crafting projects.

Used this on glass where any exposed bulb is too bright since the lamp is next to our tv. Sprayed this on 3 wet layers and let it dry for 24 hours and it was perfect. My recommendation is definitely clean the product as much as you can before, even small dust particles or fuzzes from a paper towel, before you spray the first coat!

We have a glass front door on our house, and while we have a shade for it, I always found the idea of frosted glass to be desirable. I looked into it and decided that a spray-on solution would be the best for my needs as some of the more "do it yourself" options required a bit of work and could prove to be costly and time-consuming. The Rust-Oleum Frosted Glass spray had mostly positive reviews so I figured I'd give it a try. Verdict: it's a pretty excellent product! A few notes about the application process: Application is simple, but it requires a bit of patience and a consistent spray. Follow the guidelines on the canister and keep the nozzle about 10 inches or so away from the glass, using steady, sweeping sprays. I found that I didn't need to mask the wood around the glass as it just sort of "dusts off" from the surface of the wood, but I suspect that any smooth surfaces are worth masking (metal, plastic, finished wood). Another thing that is worth noting is that you absolutely should have the area well-ventilated and it's good to only do a couple sweeps at a time, letting the area air out a bit between sprays. I went all-out on my first pass and the "dust" from the frosting material got absolutely everywhere. It mops up with no issue, but it will make a mess if you blast the window for an extended period of time. Second, it's good to let it dry and make a few additional passes. My first pass seemed good, but once it dried I did notice a few inconsistent spots where the frosting wasn't quite as dense. Allowing a few minutes of drying and a few additional coats will ensure that the glass gets evenly frosted. I also decided to do a couple of vertical sweeps after the horizontal ones to break up any linearity in the spray. It worked really well. I also hand-cut a mask with Frogtape and plastic to include an artistic feature/view hole and it came out fantastic! All in all I highly recommend this product and have been very happy with the results!

Worked great; stinks really bad when you spray, so open all ur windows. I used it to frost a glass window I put LEDs behind, and it did a great job used a few coats, 2, I think.

This is by far the easiest way to create a frosted glass look. I used it on three Edison-style lamps with clear glass shades, and within minutes they looked like they came with professionally frosted glass. It's very easy to apply. Hold the can about 8 to 9 inches away and spray a light, even coat. You'll actually see the frosting appear as you spray. The transformation is pretty amazing. Dries very quickly. Make sure youre doing this outside the fumes are VERY strong. In my photos, you'll see a before shot with the clear glass and an after shot with the frosted finish. The tiny specks you see are part of the glass itself to create a rainy or textured effect, not from the spray. Best of all, it wasn't messy at all. If you're looking for an easy way to frost glass, I definitely recommend giving this a try.

Due to a water leak, we had to remodel our bathroom a lot sooner than expected. In our remodeling, we turned our tub area into a shower. There is a large window that was right next to the tub. When getting estimates, we made sure to voice our concern of privacy in the shower, as that window faces a shared back yard with other townhomes. The construction company suggested this product and we agreed to give it a shot. In the daytime, it would be fine for privacy. The issue is night showers after dark. With the back lighting, it creates a very clear shadow for the world to see. The other issue is the proximity. If this window were on the opposite side of the bathroom, it would be perfect! As it is in the shower, not so good. In conclusion, this product is great for general privacy. Not great for close up privacy. Edit: the spray comes off fairly easy. We used windex and gently used a squeegee. The squeegee scraped multiple places off with minimal pressure. Be gentle when cleaning!

Works great but ventilate your area! Opacity is great! Lets in light without nosy people looking in!

You have to be at sufficient distance from the glass otherwise excess agent will drip and will leave unwanted mark. Needs a bit practice. Area must be well ventilated as it's smell can choke you. I mean it. Though result is pretty good.

Good product just be careful how you use it

It’s a great item and solution but it would require some skill to make sure it’s done nicely.

Each coat dries quickly, reduces glass transparency. The strong smell is also notable. just what I needed

it works perfectly