WS-03A VESA Monitor Stand Low Profile Lay Flat Short Foldable with VESA Hole 75x75mm&100x100mm

These products I used on my 28-inch monitors with a VESA 100x100 mount to fit them well. When I open the package of these products, the packaging is very good and includes instructions on how to install them with monitors or small touchscreen displays with a VESA 100X100 mount. Also, I have small tools provided that help me save money rather than spend more on tools to put it together. It was a perfect fit with my monitors, and it can be placed in different positions to rotate or tilt. Also, it’s very durable and made of heavy-duty metal materials covered with black plastic to prevent the sight of metals' dull shine. Either way, you can take it out in ease. When I try to put the position monitors on these products, it's really hard to move, but it’s a good weight to let the monitors rest on. It is good and adjustable; it can tilt up to 20 degrees, which is perfect for keeping monitors lower and easier to see on a big desk, along with second monitors above it. You might need someone's help if it’s really hard to put in positions. It has a rubber under the base to be slip-resistant on surfaces, which is nice for my monitors not to move on a smooth table. I highly recommend this product for giving more space and a low-tilt view on the desk.

I needed a smaller stand for my older monitor, and it works perfectly. It has a nice weight to it and is hard to topple over. However, it takes a lot of effort to bend and adjust the angle of the monitor but it remains stable after adjustment. It was very easy to install and came with the screws necessary.

I have neck problems, and I thought I would be stuck with using laptops forever. I can no longer use a desktop with external monitor - because most monitors are too tall on the base stand they come on. I have an old Acer 15" LCD monitor, but it sits too tall with the factory monitor stand. I was not even aware of aftermarket monitor stands that simulates the factory stand until recently. I saw that THIS particular stand can go as low as you want. EXACTLY what I wanted. It came in yesterday. After setting it up, it does EXACTLY what I want. I was able to put the monitor very low to the desktop. One things I DID have to do - I found that the monitor shook as I typed on the keyboard - apparently it is very sensitive to vibrations on the desk. But, I found a solution.... I found a very small box, and I rested the bottom of the monitor on that box. That eliminated the vibration issue. So, yes, I WOULD buy this stand again. Great price, and it does exactly what I wanted. My desk is in front of a window, so I really did not want to buy one of those long, adjustable arms that can hold a monitor. This replaces a factory monitor stand, and still looks similar to a factory stand.

This was exactly what I needed for my computer monitor. To give you some background, I had purchased some desk organizers to help keep my desk tidy. One of them being a monitor riser with storage and shelves. Due to the fact that my desk is an armoire style, vertical space is at a premium on top of my desk. The monitor on its own stand was too tall, and the stand was not adjustable.....at all. I needed something short - VERY short - to replace the stand. I found this unit that looked like it would go from 90 deg to 0 deg. Which it does. Beautifully. I installed it, folded it to where I needed it, and it now fits perfectly between the riser and the armoire. The edge of the monitor is sitting at exactly 1/4 inch from the top of the riser. The stand came with screws that fit the VESA mounts on the back of the monitor. It is extremely adjustable. It is very easy to install. The monitor is as sturdy on this stand as it was on its own stand, if not more sturdy. The joints of the stand are quite stiff. I found it difficult to adjust with my hands even without anything attached to it. BUT....I would rather have them too stiff than not stiff enough. Once mounted, it was easier to adjust than I expected. At first I thought I would bend or break something on the monitor trying to get it in position but it was fine. I would definitely buy this product again and highly recommend if you're needing a replacement stand for TV or monitor.

This is a great little stand especially in my very small desk space. My screen has to fit exactly to a specific height, and the stand provides the flexibility to not have it so high. I looked into other stands and the thing I didn’t like was when I tried to shorten them, the screen had to be shoved forward which left no space for my keyboard. This stand is fairly short but I can also make it as short as I need without it being thrust that much forward. It was very easy to install and I loved that it had in addition to the correct screws plus one extra, the screwdriver needed so I didn’t have to hunt one down. The installation instructions were clear because of the pictures. I did get the screws mixed up, but then I specifically looked at the screw numbers listed on the instructions. The cover plate was easily snapped out and snapped back in again. I especially liked how it took a little bit of strength to move the arm, meaning that it won’t slip into another position. If you have trouble moving the arm, it can be loosened. The materials used to make this appear to be very sturdy. It is a very thick plastic or some other like material, and the part that attaches to the back of the monitor is steel. All in all, this is a great stand for my purposes!

These are solid supports for my 24" up-close Acer displays. They'd handle 27" displays, no problem. The config in my workspace is shallow-angle (~20 deg, relative to the desk). This enables wrap-around positioning of three or more monitors close to a seated position. It perfectly avoids obscuring an upright, large-screen display behind the center close-up, angled monitor. Competing products are sometimes reviewed as being flimsy. Um, no. The three WS-03A monitor mounts that I received in April 2026 are not flimsy. They're heavy and built like tanks. Be advised, mine arrived tightened to the max. So they were stiff as hell, but that's exactly what I prefer. Some users may want to slightly release the tension on the bolts - easily done with a wrench. A couple of overservations: The rubber feet on the bottom come with what feels like a bearing surface on them - a thin bit of clear plastic. If you want to slide your monitors around on your desk, consider leaving the plastic on. Otherwise, if you peel it off, the rubber feet provide a decent slip-resistant surface underneath. Note also that the base has mounting points on the bottom for a permanent connection to a table or wall, if it's what you need / want. I recommend this product without reservation.

This is an amazing stand for Elektron Syntakt, Digitone series with Vesa mounting holes in the back. The stand is sturdy, with very "stiff joints" so the attached devices don't shake/wobble, and stay perfectly in place when/after playing. It can be a bit of work to adjust, but you can set it and forget it once done, and don't need to constantly adjust angle/tilt (like most monitor arms out there). Photos attached shows ways this stand can be used for Syntakt and Digitone, and as noted above, the height and angle are super adjustable, but it stays in place while playing (see how the two units can be almost perfectly flush against one another in the side by side photo) with zero noticeable wobble. My only complaint is the stand is too "tall" some time. The bottom of the digitone/syntakt measures to be about 1.75'' from table surface when the stand is all the way down, but all the benefits noted above more than makes up for this. This might be a super niche comment - If you use Output Sidecar, Syntakt/Digitone fits perfectly in the drawer above the 19'' rack without the stand, but with the stand, too tall by about 0.25''. I've had to relocate the Syntakt/Digitone after getting the stand, but it is definitely worth it. To summarize - This stand is slightly pricier than some others on amazon, but it's totally worth it. I'd highly recommend buying this stand if you have any of those elektron gear with Vesa mounting holes (i think digitone, digitakt, syntakt, analog heat, analog heat+fx).

Super solid. As it arrives, it looks like it wouldn't fit my old monitor. But if you extend the mounting portion flat, the plastic trim piece slides off, exposing a metal plate with all manner of pre-drilled holes. Use the long screws to connect the monitor to the mount, Slide the plastic trim piece into place (with the brand sticker on it) Use the included small screws to attach the trim piece The hinges are very stiff. This is by design and it's what you want. Be smart when adjusting the angle and height of the monitor after assembly, a delicate monitor could break if you just reef on it. Apply pressure to the stand itself. Worth the money and exactly what I wanted. Allowed my Samsung S24E310HL monitor to sit 4" lower and at a better angle than the manufacturer stand. The base has cutouts if you wanted to mount it to the wall (third photo... wall mounting hardware not included). And, for those who care, the included fasteners are JIS (Japanese industrial standard) and not Philips head. They look the same, and a Philips screwdriver will work, and it's design is prone to stripping out a JIS fastener if enough pressure isn't applied. JIS driver will slot in for a much more secure hold. If you are into hand tools, a JIS driver is a joy to use. Treat-yo-self! Enjoy! And buy with confidence.

Einwandfrei. Stabil, wiegt ordentlich und ist sehr gut verarbeitet. Der Monitorschwenkarm ist ziemlich fest , man kann aber die beiden Schrauben and der VESA Befestigung etwas lockern dann geht es wunderbar mit dem Schwenken. Ich habe einen 16" Touchscreen, sehr leicht,kaum benutzbar mit Touch weil er sich sofort bewegte. Mit diesem Monitor Ständer bewegt sich nichts mehr, komplett bombenfest. Der Touchscreen kann endlich mit Streamdesk, Deskboard oder anderen TouchApps wunderbar benutzt werden, ohne dass er wegrutscht. Für Musiker > Studio One 7 - Mischpult auf den Touchscreen funktioniert alles. Plugins und alles andere auch per Touch Ohne Halterung undenkbar, das Teil würde ständig wegrutschen. Viel Spaß

Sturdy AF Well made and fits the purpose

Perfetto per la mia tv samsung che uso come monitor testi per le mie serate. Utilissimo

Sabit olması en iyi özelliği

Acheté comme support pour mon Digitakt 2, le produit répond totalement à mes attentes. Vu le prix de la machine, je n'avais pas envie de tomber sur un support trop faible qui risque de le faire tomber et pour ça, je ne suis pas déçu. C'est ultra costaud et les articulations sont très solides. C'est même difficile à bouger mais je préfère ça à un support trop souple.