Question 1

Recently the output from controller has been over 16 volts. Hooked up to two 100 watt panels. Is this unit bad? Don't want to damage my batteries.

Accepted Answer

UNREGULATED 16 Volt DC can damage a battery but a working controller should prevent this. You can check the output of the controller and see what the voltage is. Should be no more than 15 Volts DC at most ... if it's higher, you have a problem that should be corrected. You may have a higher voltage directly off the panel without the controller. Mine in bright sunlight can get as high as 20 Volts DC. Again ... a working controller should prevent you from frying your battery. Just make sure it's working before hooking up the battery!

Question 2

I have two 100watt hqst panels that are 5.8amps.  i can’t put these in parallel can i?

Accepted Answer

I wouldn't do that. I would get a controller that could handle12 amps like a 20 amp or at least 15 amps. If you exceed the rated capacity then it may damage the unit or cause malfunction.  They make higher capacity controllers at Renogy for a little more cost. I only have one 50 watts panel to keep a battery topped off which is around 2.85 amps.

Question 3

I have a single renogy 100w 12v poly/ mono solar panel.  is it possible to use this panel/controller combo to charge 2 12v batteries in series?

Accepted Answer

It should work with your setup since it automatically detects 12 or 24 volts. One thing That might be a problem is the 12v panel voltage. You may need a higher voltage panel or put two panels in series. It should be easy to do a quick mock up on the ground and check it out. Also, my advice is worth exactly what you are paying for it.

Question 4

Can I hook up a 24 volt solar panel and charge a 12 volt battery?

Accepted Answer

Thank you for contacting Renogy, The 10-amp Wanderer can accept up to 50-Volts D/C. However, please note that it can only accept 100-watts of solar input when charging a 12-volt battery bank.

ASIN	B07NPDWZJ7
Brand Name	Renogy
Color	black
Customer Reviews	4.3 4.3 out of 5 stars (3,086)
Display Type	LCD
Global Trade Identification Number	00816360029953
Included Components	Wanderer 10A solar charge controller
Item Dimensions L x W x H	11.9L x 7.5W x 2.8H centimeters
Item Type Name	Compact Design w/ LCD Display for AGM, Gel, Flooded and Lithium Battery, Wanderer 10A
Item Weight	0.27 Pounds
Manufacturer	Renogy
Material Type	Gel
Model	RNG-CTRL-WND10
Number of Items	1
Number of Packs	1
Operating Temperature	40 Degrees Celsius
Part Number	Wanderer 10A
UPC	816360029953
Voltage	24 Volts
Warranty Description	2-year material and workmanship warranty

Wanderer

Details

Details

Description

Specifications

Common Questions