PonicsPump FHS4: Water Fountain Spray Head Set - Choose from 4 Water Patterns: Blossom, Frothy, Mushroom and Two-Tier Styles

This has worked great since I bought it almost a year ago. I run it in an above ground pond in the garden.

The fountain pieces look pretty nice but are not completely compatible with the ponic pump I purchased on here as one of those "buy them together" deals. These attachments don't fit on to all the adapter attachments that come with the pump (e.g., the longer straight piece that comes with the pump). I have come away frustrated with this purchase and delayed with my project.

Great price and comes with a bunch of different heads but it didn't properly fit onto the pump. I check the pump measurements and the ones listed for the fountain heads but the head was slightly too small so I had to use black wire tape so it would stay on and that worked.

First up, I suppose I misunderstood the thread size, not realizing that it isn't NPT standard. (My existing fountain has female NPT). Well, I was able to just stick the tube into my fitting, and it works fine.These nozzles aren't the highest quality, but crikey, you can't beat the price!

I previously used more expensive products but, after awhile, all of them get clogged, weather-damaged, etc.The price is great. Similar bell-features cost two to three times as much. This is basically a variety-pak for a fraction of the cost.They didn't fit the standard PVC piping for my fountain, so I did have to file down some piping to reduce its outer diameter.The bells were nice. To my surprise, I also enjoy the patterns of the other sprays, as well.Over time, I can't imagine these doing any worse than the more expensive nozzles they replaced.

I bought these separately and also with a matching pump. Neither of the fountain heads fit the pump. They are 3/4 inch and the pumps are both 1/2 and no converter. I am very disappointed in this as these nozzles are just what I wanted for my pond but as I cant fit them into the pump as they are too big they are not a value. These were sold as companion to the pump. VERY disappointed in the mismatch. There is no way to keep them on the pump with the force of the pump and they will not fit within the light ring. They are just too big so not a companion to the pump they are sold with. Poor quality control on this one. The delivery was great and all of it was intact.

Love the variety of different heads, love that the bottom screws into the pump - I use it with the PonicsPump PP40016: 400 GPH Submersible Pump with 16' Cord - 25W... for Hydroponics, Aquaponics, Fountains, Ponds, Statuary, Aquariums & more. Comes with 1 year limited warranty. , MacCourt Ponds PP2615 Plantainer, 20-Gallonand a half whiskey barrel.Because it's monsoon season and we gets lots of dust storms and high winds I have the fountain on a semi-low setting. It's a nice feature that you can adjust the water flow.

I've never used off-brand pump attachments, and these are OK for the price. I broke one of the flow knobs on first use. Some of the extenders don't seem to create a very good seal. Once together, the fountain on my pump works fine, just not a terribly high-quality item.